扇形复合装药驱动破片定向飞散的数值模拟

凌琦; 何勇; 何源; 周杰

doi:10.11858/gywlxb.2017.05.008

扇形复合装药驱动破片定向飞散的数值模拟

doi: 10.11858/gywlxb.2017.05.008

南京理工大学智能弹药技术国防重点学科实验室，江苏南京 210094

基金项目:

武器装备预先研究项目 403030202

详细信息

作者简介:
凌琦(1990—)，男，博士研究生，主要从事高效毁伤技术研究.E-mail:lingqicn@foxmail.com

通讯作者:
何勇(1964—)，男，教授，主要从事毁伤效应与新概念弹药技术研究.E-mail:yhe1964@mail.njust.edu.cn

中图分类号: TJ410.1
计量
- 文章访问数: 7717
- HTML全文浏览量: 3375
- PDF下载量: 114
出版历程
- 收稿日期: 2016-12-22
- 修回日期: 2017-03-06

Numerical Simulation of Directed Scattering of Fragments Driven by Sector-Shaped Double-Layer Charge

ZNDY of Ministerial Key Laboratory, Nanjing University of Science and Technology, Nanjing 210094, China

摘要

摘要: 利用LS-DYNA软件对扇形单一装药和复合装药驱动破片的作用过程进行了数值模拟，得到预制破片的初速及分布规律，并对不同起爆方式和复合装药参数的扇形装药结构破片驱动特性进行了计算分析。结果表明：数值模拟计算值与试验结果吻合较好，相对于单一装药结构，复合装药能使破片飞散更为集中，且破片的总动能提高了12%以上；通过改变起爆方式和复合装药参数，破片的综合毁伤效能可进一步增强。
- 扇形装药 /
- 复合装药 /
- 超压爆轰 /
- 定向战斗部
Abstract: The dynamic processes of the fragments driven by single and double layer charges were numerically simulated using LS-DYNA and the initial velocity and the distribution of the preformed fragments were obtained.The effects of the initiation positions and the explosive parameters of the double-layer charge on the fragment-driven process were calculated and analyzed.The results show that the calculated values are in good agreement with the experimental results.Compared with the single charge, the double layer charge can make the fragments more focused, and the total kinetic energy of the fragments also increases by more than 12%.The comprehensive damage efficiency of the fragments can be further improved by changing the initiation mode and the explosive type of the double layer charge.
- sector-shaped charge /
- double-layer charge /
- overdriven detonation /
- directional warhead

HTML全文

图 1 试验装置

Figure 1. Configurations of test devices

下载: 全尺寸图片幻灯片

图 2 试验布置示意图

Figure 2. Scheme of test set-up

下载: 全尺寸图片幻灯片

图 3 试验现场布置照片

Figure 3. Photo of test set-up

下载: 全尺寸图片幻灯片

图 4 有限元模型

Figure 4. Finite element models

下载: 全尺寸图片幻灯片

图 5 单一及复合装药的爆轰过程

Figure 5. Detonation process of single and double layer charge

下载: 全尺寸图片幻灯片

图 6 爆轰压力变化曲线

Figure 6. Detonation pressure of single and double layer charge

下载: 全尺寸图片幻灯片

图 7 50 μs时的破片分布(顶视图)

Figure 7. Scattering of fragments at 50 μs (top view)

下载: 全尺寸图片幻灯片

图 8 破片在靶板上的分布

Figure 8. Fragment distribution on target

下载: 全尺寸图片幻灯片

图 9 破片沿轴向的速度分布

Figure 9. Fragment velocity distribution along axial direction

下载: 全尺寸图片幻灯片

图 10 破片沿周向的速度分布

Figure 10. Fragment velocity distribution along circumferential direction

下载: 全尺寸图片幻灯片

图 11 破片飞散方位角的定义

Figure 11. Definition of θ

下载: 全尺寸图片幻灯片

图 12 两点起爆时的爆轰波形

Figure 12. Detonation waves in two-point detonation

下载: 全尺寸图片幻灯片

图 13 两点起爆时的爆轰压力变化曲线

Figure 13. Detonation pressure of single- and double-layer charge with two-point detonation

下载: 全尺寸图片幻灯片

图 14 两点起爆时的破片速度分布

Figure 14. Fragment velocity distribution with two-point detonation

下载: 全尺寸图片幻灯片

表 1 炸药的材料模型及状态方程参数^[5]

Table 1. Parameters of explosive and equation of state^[5]

Explosive	ρ/(g·cm^-3)	D/(m·s^-1)	p_CJ/(GPa)	A/(GPa)	B/(GPa)	R₁	R₂	ω
Single charge	1.717	7 980	29.5	524.2	7.678	4.2	1.10	0.34
Double layer outer charge	1.700	8 325	30.0	854.5	20.490	4.6	1.35	0.25

下载: 导出CSV

表 2 内层装药材料参数^[13]

Table 2. Material parameters of inner charge^[13]

ρ/(g·cm^-3)	I/(10⁶s^-1)	G₁/(10^-16Pa^-2·s^-1)	G₂/(10^-16Pa^-2·s^-1)	a	b	c	d	e	f	x	y	z
1.717	44	514	0	0.01	0	0.222 2	0.666 7	0	0	4	2	0

下载: 导出CSV

表 3 模型材料参数^[3]

Table 3. Parameters of material model^[3]

Material	Density/ (g·cm^-3)	Shear module/ (GPa)	Yield stress/ (GPa)	Harden module/ (GPa)	Failure plastic strain
Shell	7.85	80.0	0.8	2.0	0.8
Liner	2.79	26.5	0.4	7.4	0.5
Fragment	7.85	80.0

下载: 导出CSV

表 4 破片飞散参数统计

Table 4. Parameters statistics of fragment scattering

Charge type	v/(m/s)	E_k/(kJ)	θ/(°)
Single charge	1 081	87.0	42.6
Double layer charge	1 144	97.5	29.4

下载: 导出CSV

表 5 两点起爆条件下的破片飞散参数

Table 5. Parameters of fragment scattering with two-point detonation

Charge type	v/(m·s^-1)	E_k/(kJ)	θ/(°)
Single charge	1 078	86.2	40.7
Double layer charge	1 139	96.6	25.3

下载: 导出CSV

表 6 复合装药参数

Table 6. Parameters of double-layer charge

Explosive position	Explosive type	ρ/(g·cm^-3)	D/(m·s^-1)	p_CJ/(GPa)
Inner layer	TNT	1.630	6 930	21.0
Outer layer	PBX9502	1.895	7 710	30.2
	Comp.B	1.717	7 980	29.5
	PETN	1.770	8 300	33.5
	8701	1.700	8 325	30.0
	PBX9404	1.840	8 800	37.0

下载: 导出CSV

表 7 复合装药参数对破片飞散的影响

Table 7. Effects of explosive type on fragment scattering

Explosive	v/(m·s^-1)	E_k/(kJ)	θ/(°)
PBX9502-TNT	1 031	83.7	29.8
Comp.B-TNT	1 029	83.6	28.8
PETN-TNT	1 039	84.8	27.2
8701-TNT	1 030	83.5	26.6
PBX9404-TNT	1 048	85.9	24.3

下载: 导出CSV

参考文献(14)

[1]	严翰新, 姜春兰, 李明, 等.不同起爆方式对聚焦战斗部性能影响的数值模拟[J].含能材料, 2009, 17(2):143-146. doi: 10.3969/j.issn.1006-9941.2009.02.004 YAN H X, JIANG C L, LI M, et al.Numerical simulation of effect of different initiation positions on a certain focusing fragment warhead [J].Chinese Journal of Energetic Materials, 2009, 17(2):143-146. doi: 10.3969/j.issn.1006-9941.2009.02.004
[2]	张博, 李伟兵, 李文彬, 等.偏心起爆战斗部随机破片数值仿真[J].高压物理学报, 2012, 26(4):442-448. http://www.gywlxb.cn/CN/abstract/abstract1486.shtml ZHANG B, LI W B, LI W B, et al.Numerical simulation of the dispersion of random fragments under asymmetrical initiation [J].Chinese Journal of High Pressure Physics, 2012, 26(4):442-448. http://www.gywlxb.cn/CN/abstract/abstract1486.shtml
[3]	屈明, 钱立新, 杨云斌.起爆方式对战斗部破片定向性能影响的数值模拟研究[J].含能材料, 2005, 13(3):137-140. doi: 10.3969/j.issn.1006-9941.2005.03.001 QU M, QIAN L X, YANG Y B.Numerical simulation of effect of initiation position on directed performance of warhead fragment [J].Chinese Journal of Energetic Materials, 2005, 13(3):137-140. doi: 10.3969/j.issn.1006-9941.2005.03.001
[4]	张先锋, 赵晓宁.夹层装药的超压爆轰研究综述[J].含能材料, 2011, 19(3):352-360. doi: 10.3969/j.issn.1006-9941.2011.03.024 ZHANG X F, ZHAO X N.Review on overdriven detonation of double layer high explosive charge [J].Chinese Journal of Energetic Materials, 2011, 19(3):352-360. doi: 10.3969/j.issn.1006-9941.2011.03.024
[5]	张先锋, 丁建宝, 赵晓宁.夹层聚能装药作用过程的数值模拟[J].爆炸与冲击, 2009, 29(6):617-624. doi: 10.3321/j.issn:1001-1455.2009.06.011 ZHANG X F, DING J B, ZHAO X N.Numerical simulation of double layer shaped charge [J].Explosion and Shock Waves, 2009, 29(6):617-624. doi: 10.3321/j.issn:1001-1455.2009.06.011
[6]	ZHANG X F, HUANG Z X, QIAO L.Detonation wave propagation in double-layer cylindrical high explosive charges [J].Propell Explos Pyrot, 2011, 36(3):210-218. doi: 10.1002/prep.v36.3
[7]	ZHANG X F, QIAO L.Studies on jet formation and penetration for a double-layer shaped charge [J].Combustion, Explosion, and Shock Waves, 2011, 47(2):241-248. doi: 10.1134/S0010508211020134
[8]	HAMADA T, ITOH S, KATO H.An investigation on overdriven detonation phenomenon in concentric double cylindrical high explosive [J].Mater Sci Forum, 2004, 465/466:379-384. doi: 10.4028/www.scientific.net/MSF.465-466
[9]	王辉, 沈飞, 田清政, 等.复合装药偏心起爆条件下波形扫描实验研究[J].含能材料, 2015, 23(11):1041-1045. doi: 10.11943/j.issn.1006-9941.2015.11.001 WANG H, SHEN F, TIAN Q Z, et al.Wave scanning experiment of composite charge under eccentric initiation [J].Chinese Journal of Energetic Materials, 2015, 23(11):1041-1045. doi: 10.11943/j.issn.1006-9941.2015.11.001
[10]	吴成, 赵士津, 李申, 等.定向战斗部复合装药爆轰的超压区域及破片增益特性的机理分析[J].北京理工大学学报, 2015, 35(8):777-781. http://d.old.wanfangdata.com.cn/Periodical/bjlgdxxb201508002 WU C, ZHAO S J, LI S, et al.Study on the features of fragments gains and the super-pressure field in a directed warhead with double charge lamination [J].Transactions of Beijing Institute of Technology, 2015, 35(8):777-781. http://d.old.wanfangdata.com.cn/Periodical/bjlgdxxb201508002
[11]	耿荻, 马天宝, 宁建国.定向战斗部爆炸驱动规律研究[J].高压物理学报, 2013, 27(5):685-690. http://www.gywlxb.cn/CN/abstract/abstract1622.shtml GENG D, MA T B, NING J G.Study on laws of explosive driven behaviors of aimed warhead [J].Chinese Journal of High Pressure Physics, 2013, 27(5):685-690. http://www.gywlxb.cn/CN/abstract/abstract1622.shtml
[12]	赵宇哲, 李健, 马天宝.展开式定向战斗部展开过程实验研究[J].高压物理学报, 2016, 30(2):116-122. http://www.gywlxb.cn/CN/abstract/abstract1859.shtml ZHAO Y Z, LI J, MA T B.Experiment on spread processes of the spreadable aimed warhead [J].Chinese Journal of High Pressure Physics, 2016, 30(2):116-122. http://www.gywlxb.cn/CN/abstract/abstract1859.shtml
[13]	贾宪振, 杨建, 陈松, 等.带壳B炸药在钨珠撞击下冲击起爆的数值模拟[J].火炸药学报, 2010, 33(5):43-47. doi: 10.3969/j.issn.1007-7812.2010.05.012 JIA X Z, YANG J, CHEN S, et al.Numerical simulation on shock initiation of composition B explosive impacting by tungsten sphere [J].Chinese Journal of Explosives and Propellants, 2010, 33(5):43-47. doi: 10.3969/j.issn.1007-7812.2010.05.012
[14]	Century Dynamics Inc.AUTODYN theory manual (Rev 4.3)[Z].San Ramon, CA: Century Dynamics Inc, 2003.