[1] |
隋顺彬, 康建功.面板材料对泡沫铝夹芯梁抗冲击性能的影响[J].工程爆破, 2011, 17(1):20-23. doi: 10.3969/j.issn.1006-7051.2011.01.005SUI S B, KANG J G.Influence of face sheet materials on anti-impact performance of aluminum foam sandwich beam[J].Engineering Blasting, 2011, 17(1):20-23. doi: 10.3969/j.issn.1006-7051.2011.01.005
|
[2] |
刘新让, 田晓耕, 卢天健, 等.泡沫铝夹芯圆筒抗爆性能研究[J].振动与冲击, 2012, 31(23):166-173. doi: 10.3969/j.issn.1000-3835.2012.23.031LIU X R, TIAN X G, LU T J, et al.Blast-resistance behaviors of sandwich-walled cylinders with aluminum foam cores[J].Journal of Vibration and Shock, 2012, 31(23):166-173. doi: 10.3969/j.issn.1000-3835.2012.23.031
|
[3] |
陈勇, 纪冲, 龙源, 等.爆炸荷载下不同壁厚圆柱壳动力学行为的研究[J].高压物理学报, 2014, 28(5):525-532. http://www.gywlxb.cn/CN/Y2014/V28/I5/525CHEN Y, JI C, LONG Y, et al.Research on dynamic behaviors of cylindrical shells with different wall-thickness under explosion loading[J].Chinese Journal of High Pressure Physics, 2014, 28(5):525-532. http://www.gywlxb.cn/CN/Y2014/V28/I5/525
|
[4] |
顾文彬, 胡亚峰, 徐浩铭, 等.复合结构防爆罐抗爆特性的数值模拟[J].含能材料, 2014, 22(3):325-331. doi: 10.3969/j.issn.1006-9941.2014.03.010GU W B, HU Y F, XU H M, et al.Numerical simulation of blast resistant characteristics for the composite structure anti-explosion container[J].Chinese Journal of Energetic Materials, 2014, 22(3):325-331. doi: 10.3969/j.issn.1006-9941.2014.03.010
|
[5] |
ZHU F, WANG Z H, LU G X, et al.Analytical investigation and optimal design of sandwich panels subjected to shock loading[J].Mater Design, 2009, 30(1):91-100. doi: 10.1016/j.matdes.2008.04.027
|
[6] |
QIU X, DESHPANDE V S, FLECK N A.Dynamic response of a clamped circular sandwich plate subject to shock loading[J].J Appl Mech, 2004, 71(5):637-645. doi: 10.1115/1.1778416
|
[7] |
XUE Z Y, HUTCHINSON J W.Preliminary assessment of sandwich plates subject to blast loads[J].Int J Mech Sci, 2003, 45(4):687-705. doi: 10.1016/S0020-7403(03)00108-5
|
[8] |
RADFORD D D, DESHPANDE V S, FLECK N A.The use of metal foam projectiles to simulate shock loading on a structure[J].Int J Impact Eng, 2005, 31(9):1152-1171. doi: 10.1016/j.ijimpeng.2004.07.012
|
[9] |
RADFORD D D, MCSHANE G J, DESHPANDE V S, et al.The response of clamped sandwich plates with metallic foam cores to simulated blast loading[J].Int J Solids Struct, 2006, 43:2243-2259. doi: 10.1016/j.ijsolstr.2005.07.006
|
[10] |
韩守红, 吕振华.铝泡沫夹层结构抗爆炸性能仿真分析及优化[J].兵工学报, 2010, 31(11):1468-1474. http://d.old.wanfangdata.com.cn/Periodical/bgxb201011011HAN S H, LÜ Z H.Numericl simulation of blast-resisrant performance of aluminum foam sandwich structures and optimization[J].Acta Armamentarii, 2010, 31(11):1468-1474. http://d.old.wanfangdata.com.cn/Periodical/bgxb201011011
|
[11] |
张培文, 李鑫, 王志华, 等.爆炸载荷作用下不同面板厚度对泡沫铝夹芯板动力响应的影响[J].高压物理学报, 2013, 27(5):699-703. http://www.gywlxb.cn/CN/Y2013/V27/I5/699ZHANG P W, LI X, WANG Z H, et al.Effect of face sheet thickness on dynamic response of aluminum foam sandwich panels under blast loading[J].Chinese Journal of High Pressure Physics, 2013, 27(5):699-703. http://www.gywlxb.cn/CN/Y2013/V27/I5/699
|
[12] |
王志华, 朱峰, 赵隆茂.多孔金属夹芯结构动力学行为及其应用[M].北京:兵器工业出版社, 2010.WANG Z H, ZHU F, ZHAO L M.Dynamic behavior and application of sandwich structure with cellular meral cores[M].Beijing:Weapon Industry Press, 2010.
|