磁性对人造金刚石单晶机械性能的影响

罗中平; 姚亚林; 夏志华; 贺兵

doi:10.11858/gywlxb.2009.03.012

磁性对人造金刚石单晶机械性能的影响

doi: 10.11858/gywlxb.2009.03.012

1.
湖南工业大学机械工程学院，湖南株洲 412008；
2.
湖南工业大学电气与信息工程学院，湖南株洲 412008

详细信息

通讯作者:
罗中平

计量
- 文章访问数: 7974
- HTML全文浏览量: 500
- PDF下载量: 756
出版历程
- 收稿日期: 2008-04-28
- 修回日期: 2008-09-09
- 发布日期: 2009-06-15

Study on the Influence of Magnetism of Synthetic Diamond Single Crystal on Their Mechanical Performances

1.
School of Mechanical Engineering, Hunan University of Technology, Zhuzhou 412008, China;
2.
School of Electric and Information Engineering, Hunan University of Technology, Zhuzhou 412008, China

More Information

Corresponding author: LUO Zhong-Ping

摘要

摘要: 对人造金刚石单晶进行了磁性分离实验研究，在此基础上对各样品进行了静压强度、冲击强度和热冲击强度等方面的分析测试。结果表明，磁性对人造金刚石单晶的机械性能有明显的影响。金刚石单晶的磁性越强，其外观颜色越深，内部气泡和杂质及缺陷越多，表面光洁度越差，则其静压强度、常温冲击强度（IT）和热冲击强度指数（ITT）值就越低。磁性对静压强度和常温冲击强度的影响相对较小，而对热冲击强度的影响最大。
- 人造金刚石 /
- 机械性能 /
- 磁分离 /
- 静压强度 /
- 冲击强度指数
Abstract: Static-pressure strength, toughness index (IT) and thermal-toughness index(ITT) of each sample were analyzed on the basis of the experimental studies on the magnetic separation of diamond single crystal. The results show that the magnetism of synthetic diamond single crystal has an obvious influence on the mechanical performance. With the increase of magnetism, synthetic diamond single crystal becomes darker and darker in appearance color, and have more bubbles, impurities and defects inside the particles. Furthermore, their surface fineness observed under the microscope becomes worse. Meanwhile, the static-pressure strength, the IT under the normal temperature and ITT become lower and lower. The influence of magnetism on the static-pressure strength and the IT is slight, however, the influence on ITT is serious.
- synthetic diamond /
- mechanical performance /
- magnetic separation /
- static pressure strength /
- toughness index (IT)

HTML全文

参考文献(16)

Li Z H, Shao D H, Liu Q X, et al. Development and Applications in Machining Industry of Superhard Materials in China [J]. Tool Technique, 1999, 5: 3-6. (in Chinese)

李志宏, 邵德厚, 刘庆选, 等. 我国超硬材料的发展及在机械加工中的应用 [J]. 工具技术, 1999, 5: 3-6.

Petitet J P. Recent Trends in Superhard Materials Science and Techmology [J]. СверхтверДые　Материалы, 2001, 6: 3.

Luo Z P. Study on the Magnetic Separation of Synthetic Diamond [J]. Superhard Materials and Engineering, 1999, (3): 10-13. (in Chinese).

罗中平. 人造金刚石磁分离研究 [J]. 超硬材料与工程, 1999, (3): 10-13.

Zhao C X. Toughness Index of Man-Made Diamond [J]. Materials for Mechanical Engineering, 1997, 21(2): 48-49. (in Chinese)

赵春霞. 人造金刚石冲击强度 [J]. 机械工程材料, 1997, 21(2): 48-49.

Luo Z P, Yao Y L. A Study on the Methods for Precise Sorting of Synthetic Diamond Abrasives [J]. Key Engineering Materials, 2006, 304-305: 66-70.

Zhao W D, Zheng L X, Li Z F, et al. A Discussion on Standard of Toughness Index for Sythetic Diamond and Its Testing Technique [J]. Superhard Material Gem, 2002, 4: 17-20. (in Chinese)

赵文东, 郑丽雪, 李忠福, 等. 浅议企业人造金刚石冲击韧性标准与检测技术 [J]. 超硬材料与宝石, 2002, 4: 17-20.

Fang J F, Zhang J Y, Jin C H, et al. Relationship between Impact Strength and Inclusion Content in Diamond [J]. Diamond Abrasives Engineering, 2001, 2: 24-25. (in Chinese)

方建锋, 张晋远, 金成海, 等. 人造金刚石的冲击强度与其中包裹体含量关系的研究 [J]. 金刚石与磨料磨具工程, 2001, 2: 24-25.

Huo X P, Song Y Y, He Y H. Influence of Structural Features of Synthetic Diamond on Its Properties and Performance [J]. PTCA(Part A: Physical Testing), 2002, 38(3): 96-98. (in Chinese)

霍喜平, 宋媛媛, 何远航. 人造金刚石的结构特征对其性能的影响 [J]. 理化检验-物理分册, 2002, 38(3): 96-98.

Jia X P, Li F H, Chen L X, et al. Research on the Crystal Characteristics of Synthetic Diamond and Its Relative Factors [J]. Diamond and Abrasives Engineering, 2002, 2: 13-16, 18. (in Chinese)

贾晓鹏, 李风华, 陈立学, 等. 人造金刚石的晶粒性质及其相互关系的研究 [J]. 金刚石与磨料磨具工程, 2002, 2: 13-16, 18.

施引文献

资源附件(0)

访问统计