爆炸焊接参数的计算机辅助设计

王铁福

doi:10.11858/gywlxb.2004.03.009

爆炸焊接参数的计算机辅助设计

doi: 10.11858/gywlxb.2004.03.009

王铁福

南京理工大学瞬态物理国家重点实验室，江苏南京 210094

详细信息

通讯作者:
王铁福

计量
- 文章访问数: 7757
- HTML全文浏览量: 367
- PDF下载量: 894
出版历程
- 收稿日期: 2003-04-19
- 修回日期: 2003-07-08
- 发布日期: 2004-09-05

Computer-Aided Design of Explosive Welding Parameter

WANG Tie-Fu

National Key Laboratory of Transient Physics, Nanjing University of Science and Technology, Nanjing 210094, China

More Information

Corresponding author: WANG Tie-Fu

摘要

摘要: 根据爆炸焊接理论，综合分析了相关爆炸焊接参数的计算方法，利用Visual C++语言编制了爆炸焊接参数计算机辅助设计程序，该程序采用菜单和视图形式对输入、输出命令结果进行操作，方便直观。与有关实验结果的对比表明，计算所给出的焊接窗口及最佳焊接参数具有很高的准确度。爆炸焊接CAD方法对于减少实验次数，摆脱经验设计方法，选择最佳焊接参数将是非常有用的工具。
- 爆炸 /
- 爆炸焊接 /
- 爆炸复合 /
- 计算机辅助设计
Abstract: A computer-aided design program for explosive welding parameter was developed. Using Visual C++, it is convenient to import and export data by menu as well as visual operations. In comparison with the result of explosive welding test, it was shown that the optimum value of the parameter calculated with the CAD program was in agreement with the experimental result exactly. Using the CAD proposed here, it will be useful to both select the optimum parameter for explosive welding and reduce trial-and-error.
- explosive /
- explosive welding /
- explosive cladding /
- computer-aided design

HTML全文

参考文献(15)

Shao B H, Zhang K. Explosive Welding Principle and Its Appliction [M]. Dalian: Dalian University of Science and Technology Press, 1987. (in Chinese)

邵丙璜, 张凯. 爆炸焊接原理及其工程应用 [M]. 大连: 大连理工大学出版社, 1987.

Blazynski T Z. Explosive Welding Forming and Compaction [M]. London: Application Science Publishers Ltd, 1983.

Stivers S W, Wittman R H. Computer Selection of the Optimum Explosive Loading and Welding Geometry [A]. Proc 5th Int Conf on High Energy Rate Forming [C]. Denver: University of Denver, 1975.

Salwan S K, Prassad S. Application of Explosive Welding [J]. J Indian Weld, 1981, 21(1): 7-14.

Wylie H K, Williams P E G. Further Experimental Investigation of Explosive Welding Parameters [A]. Proc of 3rd Int Conf of the Centerfor HEF [C]. Denver: University of Denver, 1971

Vaiddyanathan P V, Ramannathan A R. Computer-Aided Design of Explosive Welding System [J]. J Materials Processing Technology, 1993, 38: 501-516.

Krishnan J, Kakodkar A. An Explosive Investigation into Tube to Tuber-Plate Welding Using the Impactor Method [J]. J Materials Processing Technology, 1990, 22: 191-201.

Bahrani A S, Crossland B. Further Experiments on Explosive Welding and Cladding with Particular Reference to the Strength of the Bond [A]. (Applied Mechanics Convention), Proc Inst Mech Engrs [C]. 1966, 180(31): 31-46.

Meyer M D. Impact Welding Using Magnetically Driven Flyer Plates [A]. Proc 4th Int Conf of the Center for High Energy Forming [C]. Dever: University of Denver, 1973.

Chandwick M D. Some Aspect of Explosive Welding in Differet Geometries [A]. Proc of the Select Conf on Explosive Welding Institute [C]. 1968.

Zheng Y M. Explosive Welding and Metallic Composite and the Engineering Application [M]. Guangzhou: Sun Yat-Sen University Press, 2002: 116. (in Chinese)

郑远谋. 爆炸焊接和金属复合材料及其工程应用 [M]. 广州: 中山大学出版社, 2002: 116.

Rao C Q. Explosive Cladding of Thick Stainless Steel to Low-Carbon Steel [D]. Nanjing: Nanjing University of Science and Technology, 2003. (in Chinese)

饶常清. 不锈钢/普碳钢厚板坯的爆炸复合 [D]. 南京: 南京理工大学, 2003.

施引文献

资源附件(0)

访问统计