-
摘要: 介绍了对HR-2抗氢钢圆管在内爆压缩加载过程中的剪切断裂现象的初步研究结果。利用脉冲X光动态照相观测到抗氢钢圆管在压缩过程中发生了断裂;在回收破片中存在大量典型的剪切断口,对剪切断口进行了初步宏观分析。金相细观分析观察到HR-2抗氢钢中晶粒形状沿径向的变化规律;同时观察到了裂纹尖端的绝热剪切带及带内的微孔洞。Abstract: The shear fracture phenomena of HR-2 steel tube under shock loading were studied. The results of X-flash photography show that shear fracture occurred in the HR-2 steel tube during shock loading. The changes of microstructure at different radius were observed in the recovered samples. Also, adiabatic shear bands on the tip of microcracks and microvoids within the adiabatic shear bands appear.
-
Key words:
- HR-2 steel tube /
- shock loading /
- shear fracture /
- adiabatic shear bands
-
Taylor G I. Science Papers of Sir G. I. Taylor [M]. London: Cambridge University Press, 1963: 387. Grady D E, Hightower M M. Fracture of a 4140 Steel Cylinder under High Explosive Loading [R]. Sand-90-0882C, 1990. Martineau R L, Anderson C A. Expansion of Cylinder Shells Subjected to Internal Explosive Detonations [J]. Experimental Mechanics, 2000, 40(2): 219-225. 胡八一. 金属圆筒在内部爆轰加载下的膨胀断裂机理 [D]. 绵阳: 中国工程物理研究院研究生部, 1992. 张凯. 圆筒在外布炸药滑移爆轰载荷作用下飞行姿态和实验研究 [A]. 爆轰驱动和爆轰不定常增长会议论文集 [C]. 昆明, 1985. 封加波. 爆炸载荷下金属柱壳的变形和破坏规律研究 [D]. 绵阳: 中国工程物理研究院研究生部, 1988. 张万甲. 髙应变率下抗氢钢动态特性的宏观与微观研究 [R]. 绵阳: 中国工程物理研究院流体物理研究所, 1994.
点击查看大图
计量
- 文章访问数: 7646
- HTML全文浏览量: 394
- PDF下载量: 706