-
摘要: 描述了对爆炸磁通量压缩发生器(MFCG)的爆炸金属管进行的爆轰测试试验。利用电探针方法,测试得到了金属管中的粉状RDX炸药的爆轰速度。采用高速分幅相机测试技术,得到了金属管膨胀运动过程的分幅照片,掌握了金属管的膨胀及破裂情况,并由此测得了膨胀角。本试验结果为MFCG的设计和改进提供了依据。Abstract: Metal tube is the important part of MFCG. Its expansive characteristic driven by detonation product is the important basis of the MFCG design. In this paper, the detonation velocity of RDX explosive powder in copper tube was measured by electric method. We derived the detonation velocity of RDX powder (the density was 1.09 g/cm3) was 6.42 km/s. By means of measuring the distance between two electric pins in the metal tube and the time interval of detonation wave traveling, the expansive process of copper tube was measured by optical method with high-speed camera. The average values of expansive angle of the metal tube in three shots were 26.4, 28.5 and 27.3, respectively. Expansive velocity along radius direction was 1.51~1.63 km/s. We have not found any fracture of the tube within the range of the metal tube expanding to two times of the original radius. The results show that the characteristic of the metal tube satisfies the MFCG designs.
-
Key words:
- MFCG /
- metal tube /
- detonation velocity /
- expansive angle /
-
龚兴根, 谢卫平, 蔡明亮, 等. 爆炸与冲击, 1998, 18(2): 187-191. Binder A E, et al. Effects of Metallurgical Microstructure of Armatures on Compressed Magnetic Field Generators. SAND- 79-08900, 1979. Kamlet M J, et al. J Chem Phys, 1968, 48: 23.
点击查看大图
计量
- 文章访问数: 7511
- HTML全文浏览量: 616
- PDF下载量: 839