Research on the Discarding Characteristic of a Novel Sabot
-
摘要: 为避免脱壳穿甲弹出炮管后与炮口制退器的相互干扰,在传统“马鞍形”弹托的基础上研究了一种新型结构弹托。分析了这种弹托的脱壳机理,并对该弹托进行了脱壳试验。研究结果表明,通过调整迎风面倾斜角度、减小迎风槽和背风槽的体积大小、在前定心部开设均匀分布的圆柱形通孔,可以减小弹托的分离角度,避免了弹托与制退器的相互干扰。Abstract: In order to avert the mutual interference that occurs between the armor piercing discarding sabot and the muzzle brake when the armor piercing projectile ejects out of the gun barrel, a novel sabot was designed based on the traditional saddle-shaped sabot.The discarding mechanism of the novel sabot was analyzed, and the discarding experiments of the sabots were carried out.The results show that by adopting a series of measures such as adjusting the tilt angle of the windward side, reducing the volume of the windward and the leeward troughs, distributing uniformly the opened cylindrical holes in the sabot's leading edge, the discarding angle of the sabot can be reduced, thereby averting the mutual interference between the armor piercing discarding sabot and the muzzle brake.
-
Key words:
- armor piercing discarding sabot /
- muzzle brake /
- sabot structure /
- discarding mechanism
-
-
[1] 武频, 尚伟烈, 赵润祥, 等.APFSDS弹托分离干扰三维流场数值模拟[J].空气动力学学报, 2005, 1(1):1-4. doi: 10.3969/j.issn.0258-1825.2005.01.001WU P, SHANG W L, ZHAO R X, et al.Numerical simulation of three dimensional flow field in APFSDS missile support separation [J].Journal of Aerodynamics, 2005, 1(1):1-4. doi: 10.3969/j.issn.0258-1825.2005.01.001 [2] 张奎华.穿甲弹弹托间隙啮合技术及其应用[D].南京: 南京理工大学, 2006: 3-4.ZHANG K H.The technology and application of the clearance meshing in the armor piercing projectile [D].Nanjing: Nanjing University of Science and Technology, 2006: 3-4. [3] 赵国志, 王晓鸣, 沈培辉.杆式穿甲弹设计理论[M].北京:兵器工业出版社, 1997:43-46.ZHAO G Z, WANG X M, SHEN P H.Design theory of rod armor piercing projectile [M].Beijing:The Publishing House of Ordnance Industry, 1997:43-46. [4] 杨启仁, 徐直军.脱壳动力学[M].北京:国防工业出版社, 1996:77-78.YANG Q R, XU Z J.Sabot discard dynamics [M].Beijing:National Defense Industry Press, 1996:77-78. [5] 于煜斌, 张靖, 王克勤.新型有翼弹托脱壳机理研究[J].兵工学报, 2009, 6(6):668-671. doi: 10.3321/j.issn:1000-1093.2009.06.003YU Y B, ZHANG J, WANG K Q.Research on the discarding characteristic of a novel sabot with wing [J].Acta Armamentarii, 2009, 6(6):668-671. doi: 10.3321/j.issn:1000-1093.2009.06.003 [6] 岳明凯, 刘欣宁.炮口制退器现状及其发展趋势[J].兵工自动化, 2015, 3(3):1-6. http://d.old.wanfangdata.com.cn/Periodical/bgzdh201503001YUE M K, LIU X N.Situation and development of muzzle brake [J].Ordnance Industry Automation, 2015, 3(3):1-6. http://d.old.wanfangdata.com.cn/Periodical/bgzdh201503001