knowledge of professional and technical personnel Notice on the organization of advanced research class on high-pressure science and new materials of engineering
Volume 39 Issue 5
May. 2025
Turn off MathJax
Article Contents
Chinese Journal of High Pressure Physics  > 2025  >  39(5): 054101.
ZHAO Dong, QU Kepeng, HU Xueyao, HE Na, WANG Yixin, XIAO Wei. Dynamic Mechanical Behavior and Ignition Characteristics of DNAN-Based Melt-Cast Explosives[J]. Chinese Journal of High Pressure Physics, 2025, 39(5): 054101. doi: 10.11858/gywlxb.20240936
Citation: ZHAO Dong, QU Kepeng, HU Xueyao, HE Na, WANG Yixin, XIAO Wei. Dynamic Mechanical Behavior and Ignition Characteristics of DNAN-Based Melt-Cast Explosives[J]. Chinese Journal of High Pressure Physics, 2025, 39(5): 054101. doi: 10.11858/gywlxb.20240936
shu

Dynamic Mechanical Behavior and Ignition Characteristics of DNAN-Based Melt-Cast Explosives

doi: 10.11858/gywlxb.20240936
  • 1.

    Xi’an Modern Chemistry Research Institute, Xi’an 710065, Shaanxi, China

  • 2.

    Xi’an North Hui An Chemical Industries Co. Ltd., Xi’an 710302, Shaanxi, China

  • Received Date: 08 Nov 2024
  • Rev Recd Date: 16 Dec 2024
  • Issue Publish Date: 01 May 2025
    Abstract
  • In order to study the dynamic mechanical behavior and ignition characteristics of a DNAN-based melt-cast explosive, quasi-static and dynamic compression tests, as well as passive confining pressure tests were carried out using a universal material testing machine and a split Hopkinson pressure bar (SHPB). Impact ignition test was carried out using a drop hammer. Scanning electron microscope (SEM) and industrial computed tomography (CT) were used to examine the morphology changes in the samples before and after loading. The stress-strain curves, ignition thresholds and damage characteristics of DNAN-based melt-cast explosive under different loading conditions were obtained. The dynamic mechanical behavior, ignition characteristics and damage mechanism of the explosive under different loading conditions were obtained. The results show that the dynamic mechanical behavior of the DNAN-based melt-cast explosive exhibits a strain-rate dependence, demonstrating more pronounced brittleness compared to typical press-loaded explosives, lower strength under uniaxial compression, and peak stresses comparable to those observed in multi-axial compression. The holes are the main initial damage form of the explosive. The holes are filled and compacted under compressive loading. The main damage mechanisms are transgranular fracture and interfacial debonding. Under coupled compress-shear loading, shear flow occurs in the charge and the particles are rearranged. With the increase of loading strength, the main damage mechanism changes from intergranular fracture to transgranular fracture. In the drop-weight impact ignition test, DNAN-based melt-cast explosives are more sensitive to compression loading. The maximum unreacted drop heights and peak stresses under compress and compress-shear loading are 500 mm, 556 MPa and 600 mm, 622 MPa, respectively. The primary ignition mechanism is likely attributable to either the adiabatic compression of bubbles or the thermal energy generated by the impact collapse of voids resulting from compressive damage.

     

    • FullText(HTML)
  • loading
    • References(23)
  • [1]
    DIENES J K. Frictional hot-spots and propellant sensitivity [J]. MRS Online Proceedings Library, 1983, 24(1): 373–381. doi: 10.1557/PROC-24-373
    [2]
    李尚昆, 黄西成, 王鹏飞. 高聚物黏结炸药的力学性能研究进展 [J]. 火炸药学报, 2016, 39(4): 1–11. doi: 10.14077/j.issn.1007-7812.2016.04.001

    LI S K, HUANG X C, WANG P F. Recent advances in the investigation on mechanical properties of PBX [J]. Chinese Journal of Explosives & Propellants, 2016, 39(4): 1–11. doi: 10.14077/j.issn.1007-7812.2016.04.001
    [3]
    屈可朋, 陈鹏, 李亮亮, 等. 含能装药损伤研究进展 [J]. 飞航导弹, 2018(11): 92–96. doi: 10.16338/j.issn.1009-1319.20180153

    QU K P, CHEN P, LI L L, et al. Research progress on damage of energetic charge [J]. Aerodynamic Missile Journal, 2018(11): 92–96. doi: 10.16338/j.issn.1009-1319.20180153
    [4]
    朱道理, 周霖, 张向荣, 等. DNAN及TNT基熔铸炸药综合性能比较 [J]. 含能材料, 2019, 27(11): 923–930. doi: 10.11943/CJEM2019170

    ZHU D L, ZHOU L, ZHANG X R, et al. Comparison of comprehensive properties for DNAN and TNT-based melt-cast explosives [J]. Chinese Journal of Energetic Materials, 2019, 27(11): 923–930. doi: 10.11943/CJEM2019170
    [5]
    LI S R, DUAN Z P, GAO T Y, et al. Size effect of explosive particle on shock initiation of aluminized 2, 4-dinitroanisole (DNAN)-based melt-cast explosive [J]. Journal of Applied Physics, 2020, 128(12): 125903. doi: 10.1063/5.0016310
    [6]
    蒙君煚, 周霖, 曹同堂, 等. 2, 4-二硝基苯甲醚(DNAN)基熔铸炸药研究进展 [J]. 含能材料, 2020, 28(1): 13–24. doi: 10.11943/CJEM2018359

    MENG J J, ZHOU L, CAO T T, et al. Research progress of 2, 4-dinitroanisole-based melt-cast explosives [J]. Chinese Journal of Energetic Materials, 2020, 28(1): 13–24. doi: 10.11943/CJEM2018359
    [7]
    RAVI P, BADGUJAR D M, GORE G M, et al. Review on melt cast explosives [J]. Propellants, Explosives, Pyrotechnics, 2011, 36(5): 393–403. doi: 10.1002/prep.201100047
    [8]
    TAYLOR S, PARK E, BULLION K, et al. Dissolution of three insensitive munitions formulations [J]. Chemosphere, 2015, 119: 342–348. doi: 10.1016/j.chemosphere.2014.06.050
    [9]
    李东伟, 姜振明, 张向荣, 等. 2, 4-二硝基苯甲醚基高爆速熔铸炸药爆轰性能表征 [J]. 兵工学报, 2016, 37(4): 656–660. doi: 10.3969/j.issn.1000-1093.2016.04.012

    LI D W, JIANG Z M, ZHANG X R, et al. Characterization of new 2, 4-dinitroanisole-based melt-cast high detonation velocity explosives [J]. Acta Armamentarii, 2016, 37(4): 656–660. doi: 10.3969/j.issn.1000-1093.2016.04.012
    [10]
    蒙君煚, 周霖, 金大勇, 等. 成型工艺对2, 4-二硝基苯甲醚基熔铸炸药装药质量的影响 [J]. 兵工学报, 2018, 39(9): 1719–1726. doi: 10.3969/j.issn.1000-1093.2018.09.007

    MENG J J, ZHOU L, JIN D Y, et al. Effect of forming process on casting quality of 2, 4-dinitroanisole-based casting explosive [J]. Acta Armamentarii, 2018, 39(9): 1719–1726. doi: 10.3969/j.issn.1000-1093.2018.09.007
    [11]
    李全俊, 杨治林, 岳显, 等. 战斗部熔铸装药精密成型工艺参数优化方法 [J]. 兵器装备工程学报, 2023, 44(5): 125–132. doi: 10.11809/bqzbgcxb2023.05.019

    LI Q J, YANG Z L, YUE X, et al. Optimization method of precision forming process parameters of warhead fusion casting charge [J]. Journal of Ordnance Equipment Engineering, 2023, 44(5): 125–132. doi: 10.11809/bqzbgcxb2023.05.019
    [12]
    蒙君煚, 姜振明, 张向荣, 等. 功能助剂对2, 4-二硝基苯甲醚基熔铸炸药性能的影响 [J]. 兵工学报, 2016, 37(3): 424–430. doi: 10.3969/j.issn.1000-1093.2016.03.006

    MENG J J, JIANG Z M, ZHANG X R, et al. Effect of functional agents on the performance of 2, 4-dinitroanisole-based melt-cast explosives [J]. Acta Armamentarii, 2016, 37(3): 424–430. doi: 10.3969/j.issn.1000-1093.2016.03.006
    [13]
    QIAN W, CHEN X Z, LUO G. Polymer reinforced DNAN/RDX energetic composites: interfacial interactions and mechanical properties [J]. Central European Journal of Energetic Materials, 2017, 14(3): 726–741. doi: 10.22211/cejem/75609
    [14]
    蒙君煚, 周霖, 金大勇, 等. 功能助剂对DNAN/RDX熔铸炸药界面黏结强度的影响 [J]. 含能材料, 2018, 26(9): 765–771. doi: 10.11943/CJEM2018061

    MENG J J, ZHOU L, JIN D Y, et al. Effect of functional additives on interface bonding strength of DNAN/RDX melt-cast explosives [J]. Chinese Journal of Energetic Materials, 2018, 26(9): 765–771. doi: 10.11943/CJEM2018061
    [15]
    SUN S H, ZHANG H B, XU J J, et al. Two novel melt-cast cocrystal explosives based on 2, 4-dinitroanisole with significantly decreased melting point [J]. Crystal Growth & Design, 2019, 19(12): 6826–6830. doi: 10.1021/acs.cgd.9b00680
    [16]
    YANG Y, DUAN Z P, LI S R, et al. Detonation characteristics of an aluminized DNAN-based melt-cast explosive [J]. Propellants, Explosives, Pyrotechnics, 2023, 48(1): e202200088. doi: 10.1002/prep.202200088
    [17]
    李淑睿, 段卓平, 高天雨, 等. 2, 4-二硝基苯甲醚基钝感熔铸含铝炸药的冲击起爆特性 [J]. 含能材料, 2021, 29(2): 88–95. doi: 10.11943/CJEM2020238

    LI S R, DUAN Z P, GAO T Y, et al. Shock initiation characteristic of insensitive DNAN-based aluminized melt-cast explosive [J]. Chinese Journal of Energetic Materials, 2021, 29(2): 88–95. doi: 10.11943/CJEM2020238
    [18]
    张思危, 崔庆忠. DNAN基高固含量熔铸炸药力学性能研究 [J]. 兵工自动化, 2022, 41(12): 100–105, 113. doi: 10.7690/bgzdh.2022.12.022

    ZHANG S W, CUI Q Z. Study on mechanical properties of DNAN-based high solid content melt-cast explosive [J]. Ordnance Industry Automation, 2022, 41(12): 100–105, 113. doi: 10.7690/bgzdh.2022.12.022
    [19]
    李东伟, 苗飞超, 张向荣, 等. 2, 4-二硝基苯甲醚基不敏感熔注炸药动态力学性能 [J]. 兵工学报, 2021, 42(11): 2344–2349. doi: 10.3969/j.issn.1000-1093.2021.11.007

    LI D W, MIAO F C, ZHANG X R, et al. Dynamic mechanical properties of an insensitive DNAN-based melt-cast explosive [J]. Acta Armamentarii, 2021, 42(11): 2344–2349. doi: 10.3969/j.issn.1000-1093.2021.11.007
    [20]
    ZHU D L, ZHOU L, ZHANG X R, et al. Simultaneous determination of multiple mechanical parameters for a DNAN/HMX melt-cast explosive by Brazilian disc test combined with digital image correlation method [J]. Propellants, Explosives, Pyrotechnics, 2017, 42(8): 864–872. doi: 10.1002/prep.201700010
    [21]
    马腾, 董小丽, 杨年, 等. 约束对DNAN基熔铸炸药点火反应特性的影响 [J]. 火炸药学报, 2023, 46(12): 1086–1092. doi: 10.14077/j.issn.1007-7812.202302007

    MA T, DONG X L, YANG N, et al. Effect of constraints on the ignition reaction characteristics of DNAN-based melt-cast explosives [J]. Chinese Journal of Explosives & Propellants, 2023, 46(12): 1086–1092. doi: 10.14077/j.issn.1007-7812.202302007
    [22]
    杨年, 马腾, 黄寅生, 等. 损伤对DNAN基熔铸炸药点火后反应增长的影响 [J]. 火炸药学报, 2023, 46(11): 990–998. doi: 10.14077/j.issn.1007-7812.202302006

    YANG N, MA T, HUANG Y S, et al. Effect of damage on reaction growth of DNAN based melt-cast explosive after ignition [J]. Chinese Journal of Explosives & Propellants, 2023, 46(11): 990–998. doi: 10.14077/j.issn.1007-7812.202302006
    [23]
    赵东, 屈可朋, 董泽霖. 凝聚相炸药损伤-点火特性的研究进展 [J]. 爆破器材, 2024, 53(3): 1–9, 16. doi: 10.3969/j.issn.1001-8352.2024.03.001

    ZHAO D, QU K P, DONG Z L. Research progress on damage and ignition characteristics of condensed phase explosives [J]. Explosive Materials, 2024, 53(3): 1–9, 16. doi: 10.3969/j.issn.1001-8352.2024.03.001
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(11)  / Tables(3)

    Get Citation
    PDF
    XML

    Article Metrics

    Article views(373) PDF downloads(41) Cited by()
    Proportional views
    Related
    

    Website Copyright© Editorial Office of Chinese Journal of High Pressure Physics

    Tel:0816-2490042 E-mail:gaoya@caep.cn

    Shu ICP, 11011126 -2

    Supported by: Beijing Renhe Information Technology Co. Ltd support: info@rhhz.net  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return