knowledge of professional and technical personnel Notice on the organization of advanced research class on high-pressure science and new materials of engineering
Volume 21 Issue 4
Apr 2015
Turn off MathJax
Article Contents
Chinese Journal of High Pressure Physics  > 2007  >  21(4): 367-372 .
SHAN Shuang-Ming, WANG Ri-Ping, GUO Jie, LI He-Ping. Pressure Calibration for the Sample Cell of YJ-3000t Multi-Anvil Press at High-Temperature and High-Pressure[J]. Chinese Journal of High Pressure Physics, 2007, 21(4): 367-372 . doi: 10.11858/gywlxb.2007.04.006
Citation: SHAN Shuang-Ming, WANG Ri-Ping, GUO Jie, LI He-Ping. Pressure Calibration for the Sample Cell of YJ-3000t Multi-Anvil Press at High-Temperature and High-Pressure[J]. Chinese Journal of High Pressure Physics, 2007, 21(4): 367-372 . doi: 10.11858/gywlxb.2007.04.006
shu

Pressure Calibration for the Sample Cell of YJ-3000t Multi-Anvil Press at High-Temperature and High-Pressure

doi: 10.11858/gywlxb.2007.04.006
  • 1.

    Laboratory for Study of the Earth's Interior and Geofluids, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang 550002, China;

  • 2.

    Graduate School of Chinese Academy of Sciences, Beijing 100039, China

More Information
  • Corresponding author: LI He-Ping
  • Received Date: 15 Jan 2007
  • Rev Recd Date: 03 Apr 2007
  • Issue Publish Date: 05 Dec 2007
    Abstract
  • The pressure in the sample cell of YJ-3000t multi-anvil was calibrated in the temperature and anvil surface pressure ranges of 389~1 245 ℃ and 1.00~5.00 GPa by using the high-pressure melting curves of four metals: Cu, Al, Pb and Zn. Through the polynomial fitting of the calibration results for the four metals, we obtain a formula which is suitable for the experimental configuration in which the moderately fired pyrophillite and alumina were used as the outer and inner pressure-transmitting medium, respectively, and which can be used to calculate the practical pressure in the sample cell using the measured cell temperature and the anvil surface pressure reading. We hope that in future, the results obtained in the present work could provide a convenient and reliable pressure calibration for the sample cell of the similar experimental configuration in YJ-3000t multi-anvil at high-temperature and high-pressure.

     

    • FullText(HTML)
  • loading
    • References(21)
  • Xie H S. Introduction to Material Science of the Earth Interior [M]. Beijing: Science Press, 1997: 42-45. (in Chinese)
    谢鸿森. 地球物质科学导论 [M]. 北京: 科学出版社, 1997: 42-45.
    Xie H S, Zhou W G, Liu Y G, et al. Some Experimental Methods for Determining Physical Properties of Materials in the Earth's Interior [J]. Earth Science Frontiers, 2003, 10(2): 357-365. (in Chinese)
    谢鸿森, 周文戈, 刘永刚, 等. 地球深部物质的某些物性测量方法研究 [J]. 地学前缘, 2003, 10(2): 357-365.
    Zhou W G, Xie H S, Zhao Z D, et al. Calculation of the Strain, Stress and Elastic Energy for - Quartz Transition and Its Geological Significance [J]. Chinese Journal of High Pressure Physics, 2002, 16(4): 241-248. (in Chinese)
    周文戈, 谢鸿森, 赵志丹, 等. -石英相变的应变参数计算及其地质意义 [J]. 高压物理学报, 2002, 16(4): 241-248.
    Xie H S, Yang S Y, Xu H G. A Measurement for Electrical Conductivity of Fayalite at High Temperature and High Pressure [A]//Collected Paper of Geochemistry [C]. Beijing: Science Press, 1985: 128-132. (in Chinese)
    谢鸿森, 杨受业, 徐惠刚. 高温高压下铁橄榄石电导率的测量 [A]//地球化学集刊 [C]. 北京: 科学出版社, 1985: 128-132.
    Xie H S, Zhang Y M, Xu H G, et al. A New Method of Elastic-Wave Velocities in Minerals and Rocks at High-Temperature and High-Pressure and its Significance [J]. Sci China (Series B), 1993, 36(10): 1276-1280.
    Su G L, Xie H S, Ding D Y, et al. The Determination of Ion Association Constant of Neutral Species in Electrolytic Solution at High Temperature and Pressure [J]. Chinese Journal of High Pressure Physics, 1999, 13(Suppl): 147-150. (in Chinese)
    苏根利, 谢鸿森, 丁东业, 等. 高温高压下流体中离子缔合常数的确定 [J]. 高压物理学报, 1999, 13(增刊): 147-150.
    Liu Y G, Xie H S, Guo J, et al. A New Method for Experimental Determination of Compressional Velocities in Rock and Minerals at High Pressure [J]. Chin Phys Lett, 2000, 17(12): 924-926.
    Zhu M X, Xie H S, Guo J, et al. An Experiment Study on Electrical Conductivity of Talc at High Temperature and High Pressure [J]. Chin J Geophys, 2001, 44(3): 427-434.
    Wang D J, Li H P, Liu C Q, et al. Electrical Conductivity of Synthetic Quartz Crystals at High Temperature Pressure from Complex Impedance Measurements [J]. Chin Phys Lett, 2002, 19(8): 1211-1213.
    Dai L D, Li H P, Liu C Q, et al. Experimental Study on Impedance Spectra of Iherzolite under High
    Temperature and High Pressure [J]. Chinese Journal of High Pressure Physics, 2005, 19(1): 35-39. (in Chinese)
    代立东, 李和平, 刘丛强, 等. 高温高压下二辉橄榄岩的阻抗谱实验研究 [J]. 高压物理学报, 2005, 19(1): 35-39.
    Akella J, Kennedy G C. Melting of Gold, Silver and Copper-Proposal for a New High Pressure Calibration Scale [J]. J Geophys Res, 1971, 76(20): 4969-4977.
    Lees J, Williamson B H J. Combined Very High Pressure/High Temperature Calibration of the Tetrahedral Anvil Apparatus, Fusion Curves of Zinc, Aluminium, Germanium an Silicon to 60 kilobars [J]. Nature, 1965, 208: 278-279.
    Babb S E Jr. Parameters in the Simon Equation Relating Pressure and Melting Temperature [J]. Rev Mod Phys, 1963, 35: 400.
    Getting I C, Kennedy G C. Effect of Pressure on the emf of Chromel-Alumel and Platinun-Platnum 10% Rhodium Thermocouples [J]. J Appl Phys, 1970, 41(11): 4552-4561.
    • Relative Articles
    • Supplements(0)
    • Cited By
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Get Citation
    PDF
    XML

    Article Metrics

    Article views(11860) PDF downloads(979) Cited by()
    Proportional views
    Related
    

    Website Copyright© Editorial Office of Chinese Journal of High Pressure Physics

    Tel:0816-2490042 E-mail:gaoya@caep.cn

    Shu ICP, 11011126 -2

    Supported by: Beijing Renhe Information Technology Co. Ltd support: info@rhhz.net  

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return