药柱冲击波在有机玻璃中的衰减特性研究

徐森; 刘大斌; 彭金华; 王建灵; 郭伟; 金朋刚; 贾宪政

doi:10.11858/gywlxb.2010.06.005

药柱冲击波在有机玻璃中的衰减特性研究

doi: 10.11858/gywlxb.2010.06.005

1.
南京理工大学化工学院，江苏南京 210094；
2.
国家民用爆破器材质量监督检验中心，江苏南京 210094；
3.
西安近代化学研究所，陕西西安 710065

详细信息

通讯作者:
刘大斌

计量
- 文章访问数: 8954
- HTML全文浏览量: 339
- PDF下载量: 874
出版历程
- 收稿日期: 2009-10-30
- 修回日期: 2010-01-08
- 刊出日期: 2010-12-15

Study on the Shock Wave Attenuation of the Booster Charge in the PMMA Gap

1.
School of Chemical Engineering of Nanjing University of Science and Technology, Nanjing 210094, China;
2.
National Quality Supervision Testing Center for Industrial Explosive Materials, Nanjing 210094, China;
3.
Xi'an Modern Chemistry Research Institute, Xi'an 710065, China

More Information

Corresponding author: LIU Da-Bin

摘要

摘要: 用作图法得到了药柱与有机玻璃隔板界面处的冲击波压力，利用AUTODYN 6.1软件模拟了药柱冲击波在有机玻璃隔板中的衰减过程，并用锰铜压力计法测量了药柱冲击波在不同厚度有机玻璃隔板中的压力，并根据理论公式计算了有机玻璃中相应的冲击波速度、波后质点速度和密度。结果表明，理论计算结果、数值模拟结果与试验测量结果一致，并根据试验结果得到了冲击波压力在有机玻璃中的衰减规律；AUTODYN 6.1软件能够准确地预测冲击波在有机玻璃隔板中的衰减特性。
- 爆炸力学 /
- 冲击波 /
- 有机玻璃隔板 /
- 锰铜压力计 /
- AUTODYN
Abstract: The shock pressure at the interface between booster charge and PMMA gap was calculated by graphing method. The AUTODYN was used to simulate the attenuation process of the shock wave in the PMMA gap. The output shock pressures, which were produced by the substituted booster charge of the UN gap test, were measured in the PMMA gap at different positions by manganin gauges. The shock velocity, particle velocity and density after the shock front were calculated. The results showed that the measured data, theoretical arithmetic and numerical simulation are consistent, and the attenuation regularity of shock pressure in PMMA is extracted from the test results. AUTODYN 6.1 software is capable of predicting the attenuation characteristic of shock wave in PMMA gap.
- explosion mechanics /
- shock wave /
- PMMA gap /
- manganin gauge /
- AUTODYN

HTML全文

参考文献(20)

Liu Y C. The Studying of the Explosive Particle Size and Particle Gradation Affection on the Shock Wave Sensitivity and Output [D]. Beijing: Beijing Institute of Technology, 2000. (in Chinese)

刘玉存. 炸药粒度及级配对冲击波感度和输出的影响研究 [D]. 北京: 北京理工大学, 2000.

Chen X R, Wang K, Liu D R, et al. The Attenuation Characters of Shock Wave in Different Baffles [J]. Acta Armamentarii, 1991, (2): 77-79. (in Chinese)

陈熙蓉, 王可, 刘德润, 等. 冲击波在不同材料隔板中的衰减特征 [J]. 兵工学报, 1991, (2): 77-79.

Wang Z S, Liu Y C, Zheng M, et al. Study on the Attenuating Model of Detonation Shock Wave in the PMMA Gap [J]. Journal of Basic Science and Engineering, 2001, 9(4): 316-319. (in Chinese)

王作山, 刘玉存, 郑敏, 等. 爆轰冲击波在有机隔板中衰减模型的研究 [J]. 应用基础与工程科学学报, 2001, 9(4): 316-319.

Wang H F, Feng S S. Approximate Calculation of the Shock Wave Attenuation in Densified Medium [J]. Acta Armamentarii, 1996, 17(1): 77-82. (in Chinese)

王海福, 冯顺山. 密实介质中冲击波衰减特性的近似计算 [J]. 兵工学报, 1996, 17(1): 79-82.

Han X F, Cai R J, Yan N. Study on Attenuation of Detonation Shock wave in PMMA [J]. Energetic Materials, 2004, 12(6), 329-332. (in Chinese)

韩秀凤, 蔡瑞娇, 严楠. 雷管输出冲击波在有机玻璃中传播衰减的实验研究 [J]. 含能材料, 2004, 12(6), 329-332.

ST/SG/AC 10/1/Rev 15. Recommendation on the Transport of Dangerous Goods: Model Regulations Fifteenth Revised Edition [S]. New York and Geneva: United Nations Publication, 2007.

ST/SG/AC 10/11/Rev 4. Recommendation on the Transport of Dangerous Goods: Manual of Tests and Criteria Fourth Revised Edition [S]. New York and Geneva: United Nations Publication, 2003.

Sun Y B, Hui J M, Cao X M. Military Composite Explosive [M]. Beijing: Weapon Industry Press, 1995. (in Chinese)

孙业斌, 惠君明, 曹欣茂. 军用混合炸药 [M]. 北京: 兵器工业出版社, 1995.

Zhang J X, Liu G L. Explosion and Its Applied Technology [M]. Beijing: Weapon Industry Press, 1998. (in Chinese)

张俊秀, 刘光烈. 爆炸及其应用技术 [M]. 北京: 兵器工业出版社, 1998.

Li W X. Unidimensional Unsteady Flow and Shock Wave [M]. Beijing: National Defence Industry Press, 2003. (in Chinese)

李维新. 一维不定常流与冲击波 [M]. 北京: 国防工业出版社, 2003.

The Eighth Department of Beijing Institute of Engineering. Explosion and Its Function(Ⅰ) [M]. Beijing: National Defence Industry Press, 1979. (in Chinese)

北京工业学院八系. 爆炸及其作用(上) [M]. 北京: 国防工业出版社, 1979.

施引文献

资源附件(0)

访问统计