Citation: | ZHANG Cheng-Hao, SHEN Pei-Hui. Research on the Discarding Characteristic of a Novel Sabot[J]. Chinese Journal of High Pressure Physics, 2017, 31(5): 643-648. doi: 10.11858/gywlxb.2017.05.019 |
[1] |
武频, 尚伟烈, 赵润祥, 等.APFSDS弹托分离干扰三维流场数值模拟[J].空气动力学学报, 2005, 1(1):1-4. doi: 10.3969/j.issn.0258-1825.2005.01.001
WU P, SHANG W L, ZHAO R X, et al.Numerical simulation of three dimensional flow field in APFSDS missile support separation [J].Journal of Aerodynamics, 2005, 1(1):1-4. doi: 10.3969/j.issn.0258-1825.2005.01.001
|
[2] |
张奎华.穿甲弹弹托间隙啮合技术及其应用[D].南京: 南京理工大学, 2006: 3-4.
ZHANG K H.The technology and application of the clearance meshing in the armor piercing projectile [D].Nanjing: Nanjing University of Science and Technology, 2006: 3-4.
|
[3] |
赵国志, 王晓鸣, 沈培辉.杆式穿甲弹设计理论[M].北京:兵器工业出版社, 1997:43-46.
ZHAO G Z, WANG X M, SHEN P H.Design theory of rod armor piercing projectile [M].Beijing:The Publishing House of Ordnance Industry, 1997:43-46.
|
[4] |
杨启仁, 徐直军.脱壳动力学[M].北京:国防工业出版社, 1996:77-78.
YANG Q R, XU Z J.Sabot discard dynamics [M].Beijing:National Defense Industry Press, 1996:77-78.
|
[5] |
于煜斌, 张靖, 王克勤.新型有翼弹托脱壳机理研究[J].兵工学报, 2009, 6(6):668-671. doi: 10.3321/j.issn:1000-1093.2009.06.003
YU Y B, ZHANG J, WANG K Q.Research on the discarding characteristic of a novel sabot with wing [J].Acta Armamentarii, 2009, 6(6):668-671. doi: 10.3321/j.issn:1000-1093.2009.06.003
|
[6] |
岳明凯, 刘欣宁.炮口制退器现状及其发展趋势[J].兵工自动化, 2015, 3(3):1-6. http://d.old.wanfangdata.com.cn/Periodical/bgzdh201503001
YUE M K, LIU X N.Situation and development of muzzle brake [J].Ordnance Industry Automation, 2015, 3(3):1-6. http://d.old.wanfangdata.com.cn/Periodical/bgzdh201503001
|