Citation: | DAI Xiang-Hui, DUAN Jian, ZHOU Gang, CHU Zhe, WANG Ke-Hui, GU Ren-Hong, LI Hu-Wei, YANG Hui, LI Peng-Jie, LIU Heng-Ze. Welding Thin-Walled Projectiles for Penetrating Multi-Layered Reinforced Concrete Targets[J]. Chinese Journal of High Pressure Physics, 2017, 31(4): 469-477. doi: 10.11858/gywlxb.2017.04.016 |
[1] |
陈小伟, 张方举, 徐艾民, 等.细长薄壁弹体的屈曲和靶体等效分析[J].爆炸与冲击, 2007, 27(4):296-305. doi: 10.3321/j.issn:1001-1455.2007.04.002
CHEN X W, ZHANG F J, XU A M, et al.Buckling analysis of earth penetrating warhead and equivalent conditions of targets[J]. Explosion and Shock Waves, 2007, 27(4):296-305. doi: 10.3321/j.issn:1001-1455.2007.04.002
|
[2] |
樊兆宝, 安绍孔, 王英健, 等.真空电子束焊接技术及其在空空导弹弹体加工中的应用[J].航空制造技术, 2010(16):53-56. doi: 10.3969/j.issn.1671-833X.2010.16.007
FAN Z B, AN S K, WANG Y J, et al.Technology of vacuum electron beam welding and its application in manufacturing of air-to-air missile's body[J]. Aeronautical Manufacturing Technology, 2010(16):53-56. doi: 10.3969/j.issn.1671-833X.2010.16.007
|
[3] |
赵勇, 王伟.30CrMnSiNi2A钢环形密闭零件的电子束焊工艺研究[J].新技术新工艺, 2015(11):6-8. doi: 10.3969/j.issn.1003-5311.2015.11.002
ZHAO Y, WANG W.Research on the welding of 30CrMnSiNi2A steel ring-shaped parts[J]. New Technology & New Process, 2015(11):6-8. doi: 10.3969/j.issn.1003-5311.2015.11.002
|
[4] |
HOLMQUIST T J, JOHNSON G R, COOK W H.A computational constitutive model for concrete subject to lame stains, high strain rate and high pressures[C]//Proceedings of 14th International Symposium on Ballistics, 1993: 591-600.
|
[5] |
LSTC.LS-DYNA keyword user's manual[M]. California:Livermore Software Technology Corporation, 2003.
|
[6] |
戴湘晖, 李明, 赵南, 等.弹丸斜侵彻钢筋混凝土极限壁厚实验研究[J].北京理工大学学报, 2015, 35(增刊2):22-25.
DAI X H, LI M, ZHAO N, et al.Experimental study on the limit wall thickness of projectiles oblique impacting reinforced concrete target[J]. Transactions of Beijing Institute of Technology, 2015, 35(Suppl 2):22-25.
|
[7] |
陈小伟.动能深侵彻弹的力学设计(Ⅰ):侵彻/穿甲理论和弹体壁厚分析[J].爆炸与冲击, 2005, 25(6):499-505. doi: 10.3321/j.issn:1001-1455.2005.06.004
CHEN X W.Mechanics of structural design of EPW(Ⅰ):the penetration/perforation theory and the analysis on the cartridge of projectile[J]. Explosion and Shock Waves, 2005, 25(6):499-505. doi: 10.3321/j.issn:1001-1455.2005.06.004
|
[8] |
段建, 周刚, 田春雨, 等.半穿甲弹设计及穿甲实验研究[J].实验力学, 2011, 26(4):383-390. http://d.old.wanfangdata.com.cn/Periodical/sylx201104006
DUAN J, ZHOU G, TIAN C Y, et al.Design and penetration performance of a semi-armor-piercing penetrator[J]. Journal of Experimental Mechanics, 2011, 26(4):383-390. http://d.old.wanfangdata.com.cn/Periodical/sylx201104006
|
[9] |
ZHAO J, CHEN X W, JIN F N, et al.Depth of penetration of high-speed penetrator with including the effect of mass abrasion[J]. Int J Impact Eng, 2010, 37(9):971-979. doi: 10.1016/j.ijimpeng.2010.03.008
|
[10] |
FREW D J, FORRESTAL M J, CARGILE J D.The effect of concrete target diameter on projectile deceleration and penetration depth[J]. Int J Impact Eng, 2006, 32(10):1584-1594. doi: 10.1016/j.ijimpeng.2005.01.012
|
[11] |
古仁红, 钟方平, 李明.薄壁弹体斜侵彻混凝土的结构响应研究[J].兵工学报, 2012, 33(1):313-317. http://d.old.wanfangdata.com.cn/Conference/7559721
GU R H, ZHONG F P, LI M.Research on structure response of thin-wall projectile oblique penetration into concrete[J]. Acta Armamentarii, 2012, 33(1):313-317. http://d.old.wanfangdata.com.cn/Conference/7559721
|
[12] |
BEN-DOR G, DUBINSKY A, ELPERIN T.Estimation of perforation thickness for concrete shield against high-speed impact[J]. Nucl Eng Des, 2010, 240(5):1022-1027. doi: 10.1016/j.nucengdes.2009.12.029
|
[13] |
段建, 杨黔龙, 周刚, 等.串联随进战斗部侵彻混凝土靶实验研究[J].爆炸与冲击, 2007, 27(4):364-369. doi: 10.3321/j.issn:1001-1455.2007.04.012
DUAN J, YANG Q L, ZHOU G, et al.Experimental studies of a tandem follow-through warhead penetrating concrete target[J]. Explosion and Shock Waves, 2007, 27(4):364-369. doi: 10.3321/j.issn:1001-1455.2007.04.012
|