Citation: | LI Lei, ZHANG Xian-Feng, WU Xue, GAO Fei, LIU Chuang. Dynamic Constitutive and Damage Parameters of 30CrMnSiNi2A Steel with Different Hardnesses[J]. Chinese Journal of High Pressure Physics, 2017, 31(3): 239-248. doi: 10.11858/gywlxb.2017.03.005 |
[1] |
武海军, 姚伟, 黄风雷, 等.超高强度钢30CrMnSiNi2A动态力学性能试验研究[J].北京理工大学学报, 2010, 30(3):258-262. http://www.cnki.com.cn/Article/CJFDTotal-BJLG201003003.htm
WU H J, YAO W, HUANG F L, et al.Experimental study on dynamic mechanical properties of ultrahigh strength 30CrMnSiNi2A steel[J].Transactions of Beijing Institute of Technology, 2010, 30(3):258-262. http://www.cnki.com.cn/Article/CJFDTotal-BJLG201003003.htm
|
[2] |
吴广, 冯顺山, 董永香, 等.不同硬度弹丸对中厚靶板作用的试验研究[J].兵工学报, 2010, 31(增刊1):260-263. http://d.old.wanfangdata.com.cn/Conference/7151862
WU G, FENG S S, DONG Y X, et al.Experimental study on penetration effects of projectiles with different hardnesses on target[J].Acta Armamentarii, 2010, 31(Suppl 1):260-263. http://d.old.wanfangdata.com.cn/Conference/7151862
|
[3] |
周义清, 张治民.30CrMnSiNi2A钢在不同应变率下的力学性能研究[J].兵器材料科学与工程, 2010, 33(4):46-50. doi: 10.3969/j.issn.1004-244X.2010.04.013
ZHOU Y Q, ZHANG Z M.Mechanical property of 30CrMnSiNi2A steel under various strain rates[J].Ordnance Material Science and Engineering, 2010, 33(4):46-50. doi: 10.3969/j.issn.1004-244X.2010.04.013
|
[4] |
WEERASOORIYA T, MOY P.Effect of strain-rate on the deformation behavior of rolled-homogeneous armor (RHA) steel at different hardnesses[C]//Proceedings of the 2004 SEM International Congress and Exposition on Experimental Mechanics.Costa Mesa, 2004.
|
[5] |
WIERZBICKI T, BAO Y, LEE Y W, et al.Calibration and evaluation of seven fracture models[J].Int J Mech Sci, 2005, 47(4/5):719-743. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=126fe80bf84920c01d800b02c18720a4
|
[6] |
TENG X, WIERZBICKI T.Evaluation of six fracture models in high velocity perforation[J].Eng Fract Mech, 2006, 73(12):1653-1678. doi: 10.1016/j.engfracmech.2006.01.009
|
[7] |
李红英.金属拉伸试样的断口分析[J].山西大同大学学报(自然科学版), 2011, 27(1):76-79. doi: 10.3969/j.issn.1674-0874.2011.01.027
LI H Y.Fracture analysis of the metal tensile specimen[J].Journal of Shanxi Datong University (Natural Science Edition), 2011, 27(1):76-79. doi: 10.3969/j.issn.1674-0874.2011.01.027
|
[8] |
BRIDGMAN P W.Studies in large plastic flow and fracture[M].New York:McGraw-Hill Book Company, 1952.
|
[9] |
PERZYNA P.Fundamental problems in viscoplasticity[J].Adv Appl Mech, 1966, 9:243-377. doi: 10.1016/S0065-2156(08)70009-7
|
[10] |
JOHNSON G R, COOK W H.A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]//Proceedings of the 7th International Symposium on Ballistics, 1983: 541-547.
|
[11] |
JOHNSON G R, COOK W H.Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J].Eng Fract Mech, 1985, 21(1):31-48. http://www.sciencedirect.com/science/article/pii/0013794485900529
|
[12] |
RICE J R, TRACEY D M.On the ductile enlargement of voids in triaxial stress fields[J].J Mech Phys Solids, 1969, 17(3):201-217. doi: 10.1016/0022-5096(69)90033-7
|