Citation: | WANG Jing, REN Hui-Lan, SHEN Hai-Ting, NING Jian-Guo. Effects of Strain Rate and Porosity on the Compressive Behavior of Porous Titanium with Regular Pores[J]. Chinese Journal of High Pressure Physics, 2017, 31(4): 364-372. doi: 10.11858/gywlxb.2017.00.003 |
[1] |
LI B Y, RONG L J, LI Y Y, et al.Synthesis of porous Ni-Ti shape-memory alloys by self-propagating high-temperature synthesis:reaction mechanism and anisotropy in pore structure[J]. Acta Mater, 2000, 48(15):3895-3904. doi: 10.1016/S1359-6454(00)00184-1
|
[2] |
KURODA D, NⅡNOMI M, MORINAGA M, et al.Design and mechanical properties of new β type titanium alloys for implant materials[J]. Mater Sci Eng A, 1998, 243(1/2):244-249. http://www.sciencedirect.com/science/article/pii/S0921509397008083
|
[3] |
张俊彦.多孔材料的力学性能及破坏机理[D].湘潭: 湘潭大学, 2003. http://cdmd.cnki.com.cn/Article/CDMD-10530-2006162894.htm
ZHANG J Y.Mechanical properties and breakage mechanism of cellular materials[D]. Xiangtan: Xiangtan University, 2003. http://cdmd.cnki.com.cn/Article/CDMD-10530-2006162894.htm
|
[4] |
李煦阳.孔隙类工程材料的静动态力学性能研究和在防护工程中的应用[D].合肥: 中国科学技术大学, 2014. http://www.wanfangdata.com.cn/details/detail.do?_type=degree&id=Y2698084
LI X Y.Research on mechanics behavior and defense engineering application of void containing materials[D]. Hefei: University of Science and Technology of China, 2014. http://www.wanfangdata.com.cn/details/detail.do?_type=degree&id=Y2698084
|
[5] |
汤慧萍, 王建.多孔钛的研究进展[J].中国材料进展, 2014(9):576-585. http://d.old.wanfangdata.com.cn/Periodical/zgcljz201409009
TANG H P, WANG J.Progress in research and development of porous titanium materials[J]. Materials China, 2014(9):576-585. http://d.old.wanfangdata.com.cn/Periodical/zgcljz201409009
|
[6] |
IQBAL N, XUE P, LIAO H J, et al.Material characterization of porous bronze at high strain rates[J]. Mater Sci Eng A, 2011, 528(13/14):4408-4412. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=c55a95f3d1e69cc955a815f564e74892
|
[7] |
UPADHYAYA G S.Powder metallurgy technology[M]. Cambridge International Science Publishing, 1997.
|
[8] |
XUE P, IQBAL N, LIAO H J, et al.Experimental study, on strain rate sensitivity of ductile porous irons[J]. Int J Impact Eng, 2012, 48(1):82-86. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=c38a571b9838a1472b305bd2b6f07cb0
|
[9] |
WANG B, ZHANG J, LU G.Taylor impact test for ductile porous materials—Part 2:experiments[J]. Int J Impact Eng, 2003, 28(5):499-511. doi: 10.1016/S0734-743X(02)00105-7
|
[10] |
WANG B, KLEPACZKO J R, LU G, et al.Viscoplastic behaviour of porous bronzes and irons[J]. J Mater Process Tech, 2001, 113(1/2/3):574-580. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=ff0244416b6d8da7a287aee4ce15bc47
|
[11] |
LIU X H, HUANG H Y, XIE J X.Effect of strain rate on the compressive deformation behaviors of lotus-type porous copper[J]. Int J Min Met Mater, 2014, 21(7):687-695. doi: 10.1007/s12613-014-0959-9
|
[12] |
HYUN S K, NAKAJIMA H.Fabrication of porous iron by unidirectional solidification in nitrogen atmosphere[J]. Mater Trans, 2002, 43(3):526-531. doi: 10.2320/matertrans.43.526
|
[13] |
WANG X H, LI J, RUI H U, et al.Mechanical properties and pore structure deformation behaviour of biomedical porous titanium[J]. T Nonferr Metal Soc, 2015, 25(5):1543-1550. doi: 10.1016/S1003-6326(15)63756-6
|
[14] |
SCHUEREN B V D, KRUTH J P.Powder deposition in selective metal powder sintering[J]. Rapid Prototyping J, 1995, 1(3):23-31. doi: 10.1108/13552549510094241
|
[15] |
王永刚, 王春雷.结构特征参数和应变速率对泡沫铝压缩力学性能的影响[J].兵工学报, 2011, 32(1):106-111. http://d.old.wanfangdata.com.cn/Periodical/bgxb201101018
WANG Y G, WANG C L.Effect of structure characteristic parameters and strain rate on the compressive mechanic properties of aluminum foams[J]. Acta Armamentarii, 2011, 32(1):106-111. http://d.old.wanfangdata.com.cn/Periodical/bgxb201101018
|
[16] |
SIMONE A E, GIBSON L J.The effects of cell face curvature and corrugations on the stiffness and strength of metallic foams[J]. Acta Mater, 1998, 46(11):3929-3935. doi: 10.1016/S1359-6454(98)00072-X
|
[17] |
SIMONE A E, GIBSON L J.Effects of solid distribution on the stiffness and strength of metallic foams[J]. Acta Mater, 1998, 46(6):2139-2150. doi: 10.1016/S1359-6454(97)00421-7
|
[18] |
牛文娟.多孔钛及其合金的制备及性能研究[D].重庆: 重庆大学, 2010. http://cdmd.cnki.com.cn/Article/CDMD-10611-1011265540.htm
NIU W J.Research on preparation and properties of porous titanium and its alloys[D]. Chongqing: Chongqing University, 2010. http://cdmd.cnki.com.cn/Article/CDMD-10611-1011265540.htm
|
[19] |
刘培生, 黄林国.多孔金属材料制备方法[J].功能材料, 2002, 33(1):5-8. http://d.old.wanfangdata.com.cn/Periodical/gncl200201002
LIU P S, HUANG L G.Preparation methods for porous metal materials[J]. Journal of Functional Materials, 2002, 33(1):5-8. http://d.old.wanfangdata.com.cn/Periodical/gncl200201002
|
[20] |
卢天健, 何德坪, 陈常青, 等.超轻多孔金属材料的多功能特性及应用[J].力学进展, 2006, 36(4):517-535. doi: 10.3321/j.issn:1000-0992.2006.04.004
LU T J, HE D P, CHEN C Q, et al.The multi-functionality of ultra-light porous metals and their applications[J]. Advances in Mechanics, 2006, 36(4):517-335. doi: 10.3321/j.issn:1000-0992.2006.04.004
|
[21] |
刘培生.多孔材料孔率的测定方法[J].钛工业进展, 2005, 22(6):34-37. doi: 10.3969/j.issn.1009-9964.2005.06.008
LIU P S.Determining methods for porosity of porous materials[J]. Titanium Industry Progress, 2005, 22(6):34-37. doi: 10.3969/j.issn.1009-9964.2005.06.008
|
[22] |
LEE O S, KIM M S.Dynamic material property characterization by using split Hopkinson pressure bar (SHPB) technique[J]. Nucl Eng Des, 2003, 226(2):119-125. doi: 10.1016/S0029-5493(03)00189-4
|
[23] |
常列珍, 张治民.SHPB实验技术及其发展[J].机械管理开发, 2006(5):29-31. doi: 10.3969/j.issn.1003-773X.2006.05.015
CHANG L Z, ZHANG Z M.The experiment technology and development of SHPB[J]. Mechanical Management & Development, 2006(5):29-31. doi: 10.3969/j.issn.1003-773X.2006.05.015
|
[24] |
NAKAJIMA H.Porous metals with directional pores[M]. Springer Japan, 2013:151-153.
|
[25] |
TANE M, ICHITSUBO T, HYUN S K, et al.Anisotropic yield behavior of lotus-type porous iron:measurements and micromechanical mean-field analysis[J]. J Mater Res, 2005, 20(1):135-143. doi: 10.1557/JMR.2005.0009
|
[26] |
TANE M, ICHITSUBO T, HIRAO M, et al.Extended mean-field method for predicting yield behaviors of porous materials[J]. Mech Mater, 2007, 39(1):53-63. doi: 10.1016/j.mechmat.2006.02.008
|
[27] |
ARCHIE G E.The electrical resistivity log as an aid in determining some reservoir characteristics[J]. Trans AIME, 1942, 146(1):54-62. doi: 10.2118/942054-G
|