Volume 30 Issue 2
Jun 2016
Turn off MathJax
Article Contents
LI Xin-Tao, LONG Lian-Chun. Buckling Analysis of Thin-Walled Structures under Local Laser Irradiation[J]. Chinese Journal of High Pressure Physics, 2016, 30(2): 142-148. doi: 10.11858/gywlxb.2016.02.009
Citation: LI Xin-Tao, LONG Lian-Chun. Buckling Analysis of Thin-Walled Structures under Local Laser Irradiation[J]. Chinese Journal of High Pressure Physics, 2016, 30(2): 142-148. doi: 10.11858/gywlxb.2016.02.009

Buckling Analysis of Thin-Walled Structures under Local Laser Irradiation

doi: 10.11858/gywlxb.2016.02.009
  • Received Date: 24 Dec 2014
  • Rev Recd Date: 09 Mar 2015
  • Thin-walled structures have been widely used in engineering practice, and great attention has been paid to the study of local changes that occur in their material properties and thermal stress as they have a great influence on the structures' bearing capacity.In our study, the laser power density, irradiation spot radius and thickness of the sheet were first taken into consideration in the analysis of the thermal nonlinear buckling behavior of the thin-walled structures under local irradiation.Then, the arc-length method was applied in the investigation of the stability of the thin-walled structures under combined external loads of axial compression and laser irradiation.Our numerical results indicated that the buckling capability of the thin-walled structures decreases almost linearly with the increase of irradiation time and irradiation spot radius, but increases exponentially along with the increase of sheet thickness.

     

  • loading
  • [1]
    RAJU K K, NAIDU N R, RAO G V.Thermal buckling of circular plates with localized axisymmetric damages[J].Comput Struct, 1996, 60(6):1105-l109. doi: 10.1016/0045-7949(96)00016-8
    [2]
    JIN T L, HA N S, GOO N S.A study of the thermal buckling behavior of a circular aluminum plate using the digital image correlation technique and finite element analysis[J].Thin-Walled Struct, 2014, 77:187-197. doi: 10.1016/j.tws.2013.10.012
    [3]
    SHATERZADEH A R, ABOLGHASEMI S, REZAEI R.Finite element analysis of thermal buckling of rectangular laminated composite plates with circular cut-out[J].J Therm Stresses, 2014, 37(5):604-623. doi: 10.1080/01495739.2014.885322
    [4]
    YAGHOOBI H, TORABI M.Exact solution for thermal buckling of functionally graded plates resting on elastic foundations with various boundary conditions[J].J Therm Stresses, 2013, 36(9):869-894. doi: 10.1080/01495739.2013.770356
    [5]
    尹益辉, 陈裕泽, 邓礼辉.连续激光作用下圆板大挠度的理论分析[J].强激光与粒子束, 1999, 11(6):682-685. http://d.old.wanfangdata.com.cn/Periodical/qjgylzs199906008

    YIN Y H, CHEN Y Z, DENG L H.Large deflections of a circular plate irradiated by CW laser[J].High Power Laser and Particle Beams, 1999, 11(6):682-685. http://d.old.wanfangdata.com.cn/Periodical/qjgylzs199906008
    [6]
    尹益辉, 陈刚, 陈裕泽, 等.热力联合作用下圆板屈曲临界状态分析[J].强度与环境, 2000(2):45-50. doi: 10.3969/j.issn.1006-3919.2000.02.008

    YIN Y H, CHEN G, CHEN Y Z, et al.Analysis of buckling critical loading of circular plate loaded by combined heat and lateral force[J].Structure & Environment Engineering, 2000(2):45-50. doi: 10.3969/j.issn.1006-3919.2000.02.008
    [7]
    邓可顺, 张亚辉.考虑材料性质参数随温度变化的热屈曲试探解法[J].大连理工大学学报, 1999, 39(3):358-362. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199900056258

    DENG K S, ZHANG Y H.Trial and error method of thermal buckling for complex structures[J].Journal of Dalian University of Technology, 1999, 39(3):358-362. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199900056258
    [8]
    邓可顺.复杂结构热屈曲有限元分析[J].计算结构力学及其应用, 1994, 11(2):130-139. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199400262227

    DENG K S.Finite element analysis of thermal buckling for complex structures[J].Computational Structural Mechanics and Applications, 1994, 11(2):130-139. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199400262227
    [9]
    DENG K S, JI Z, DAVIES A W, et al.Thermal buckling of axially precompressed cylindrical shells irradiated by laser beam[J].AIAA J, 2000, 38(10):1789-1794. doi: 10.2514/2.849
    [10]
    MORIMOTO T, TANIGAWA Y, KAWAMURA R.Thermal buckling of functionally graded rectangular plates subjected to partial heating[J].Int J Mech Sci, 2006, 48:926-937. doi: 10.1016/j.ijmecsci.2006.03.015
    [11]
    HILBURGER M W, STARNES J H Jr.Effects of imperfections on the buckling response of compression loaded composite shells[J].Int J Non-Linear Mech, 2002, 37(4/5):623-643. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=0520071202488623
    [12]
    GUAN Y J, SUN S, ZHAO G Q.Finite element modeling of laser bending of pre-loaded sheet metals[J].J Mater Process Technol, 2003, 142(2):400-407. doi: 10.1016/S0924-0136(03)00603-4
    [13]
    孙承纬.激光辐照效应[M].北京:国防工业出版社, 2002:28-32.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(16)  / Tables(2)

    Article Metrics

    Article views(6780) PDF downloads(107) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return