Volume 29 Issue 1
Apr 2015
Turn off MathJax
Article Contents
BAI Jing-Song, YU Ji-Dong, DAI Cheng-Da, WANG Yu, LIU Kun, LUO Guo-Qiang, SHEN Qiang, TAN Hua, WU Qiang, ZHANG Lian-Meng. Calculation Analysis of the Impact Melting and Resolidification Process for the Bismuth Using the Ti-Cu-W Pillow Flyer[J]. Chinese Journal of High Pressure Physics, 2015, 29(1): 15-22. doi: 10.11858/gywlxb.2015.01.003
Citation: BAI Jing-Song, YU Ji-Dong, DAI Cheng-Da, WANG Yu, LIU Kun, LUO Guo-Qiang, SHEN Qiang, TAN Hua, WU Qiang, ZHANG Lian-Meng. Calculation Analysis of the Impact Melting and Resolidification Process for the Bismuth Using the Ti-Cu-W Pillow Flyer[J]. Chinese Journal of High Pressure Physics, 2015, 29(1): 15-22. doi: 10.11858/gywlxb.2015.01.003

Calculation Analysis of the Impact Melting and Resolidification Process for the Bismuth Using the Ti-Cu-W Pillow Flyer

doi: 10.11858/gywlxb.2015.01.003
  • Received Date: 04 Jul 2013
  • Rev Recd Date: 05 Sep 2013
  • Numerical simulations are carried out to design the Pillow flyer of Ti-Cu-W system, and the impact loading and quasi-isentropic loading of the bismuth sample are also carried out.We experimentally investigate the intricate physical process of impact melting and resolidification.Experiment results of wave profiles are similar with numerical ones.The complete equation of state of bismuth including five solid phases and one liquid phase is established.Triple points in phase diagram and the Hugoniot curve in high pressure area agree well with the experiment data.The temperature and phase transition information in impact loading and resolidification experiment are also obtained.According to the calculation analysis and interpretation of the experiment data, the loading experiment based on Ti-Cu-W flyer is available to study the physical process of impact melting and resolidification of bismuth, and an appropriate research method and effective technique means for experiment exploration is established.

     

  • loading
  • [1]
    Nguyen J H, Orlikowski D, Streitz F H, et al. High-pressure tailored compression: Controlled thermodynamic paths[J]. J Appl Phys, 2006, 100(2): 023508. doi: 10.1063/1.2214209
    [2]
    Nguyen J H, Orlikowski D, Streitz F H, et al. Specifically prescribed dynamic thermodynamic paths and resolidification experiments[C]//Furnish M D, Gupta Y M, Forbes J W. Shock Compression of Condensed Matter-2003. New York: AIP, 2004: 1225-1230.
    [3]
    Martin L P, Nguyen J H. Fabrication and characterization of graded impedance gas gun impactors from tape cast metal powders, UCRL-JRNL-217359[R]. Livermore, CA: Lawrence Livermore National Laboratory, 2005.
    [4]
    Martin L P, Orlikowski D, Nguyen J H. Fabrication and characterization of graded impedance impactors for gas gun experiments from tape cast metal powders[J]. Mat Sci Eng A, 2006, 427(1): 83-91. https://www.sciencedirect.com/science/article/pii/S0921509306004709
    [5]
    Martin L P, Patterson J R, Orlikowski D, et al. Application of tape-cast graded impedance impactors for light-gas gun experiments[J]. J Appl Phys, 2007, 102(2): 023507. doi: 10.1063/1.2756058
    [6]
    华劲松, 经福谦, 龚自正, 等.准等熵压缩的数值模拟[J].高压物理学报, 2000, 14(3): 195-202.

    Hua J S, Jing F Q, Gong Z Z, et al. Study of numerical simulation for quasi-isentropic compression[J]. Chinese Journal of High Pressure Physics, 2000, 14(3): 195-202. (in Chinese)
    [7]
    沈强, 王传彬, 张联盟, 等.为实现准等熵压缩的波阻抗梯度飞片的实验研究[J].物理学报, 2002, 51(8): 1759-1762.

    Shen Q, Wang C B, Zhang L M, et al. A study on generating quasi-isentropic compression via graded impedance flyer[J]. Acta Phys Sin, 2002, 51(8): 1759-1762. (in Chinese)
    [8]
    柏劲松, 罗国强, 黄娇凤, 等. Pillow飞片气炮加载实验的数值模拟研究[J].高压物理学报, 2011, 25(5): 390-394.

    Bai J S, Luo G Q, Huang J F, et al. Numerical simulation of the gas gun experiment with Pillow impactor loading[J]. Chinese Journal of High Pressure Physics, 2011, 25(5): 390-394. (in Chinese)
    [9]
    柏劲松, 罗国强, 王翔, 等. Mg-W体系密度梯度飞片复杂加载实验的计算分析[J].力学学报, 2010, 42(6): 1068-1073.

    Bai J S, Luo G Q, Wang X, et al. Calculation and analysis of the Mg-W GDI complex loading experiment[J]. Chinese Journal of Theoretical and Applied Mechanics, 2010, 42(6): 1068-1073. (in Chinese)
    [10]
    柏劲松, 沈强, 唐蜜, 等. W-Mo-Ti-Mg体系阻抗梯度飞片无冲击驱动过程数值计算[J].振动与冲击, 2010, 29(6): 72-75.

    Bai J S, Shen Q, Tang M, et al. Numerical analysis on complex loadings and shockless compressions of the W-Mo-Ti-Mg graded impedance impactor[J]. Journal of Vibration and Shock, 2010, 29(6): 72-75. (in Chinese)
    [11]
    Luo G Q, Bai J S, Tan H, et al. Characterizations of Mg-W system graded-density materials for complex loading-unloading light-gas gun experiments[J]. Metall Mater Trans A, 2010, 41(9): 2389-2395. doi: 10.1007/s11661-010-0309-0
    [12]
    柏劲松, 罗国强, 唐蜜, 等.冲击加载-准等熵加载过程的密度梯度飞片计算设计[J].高压物理学报, 2009, 23(3): 173-180.

    Bai J S, Luo G Q, Tang M, et al. Computational design of graded impactors for shock loading and quasi-isentropic compression[J]. Chinese Journal of High Pressure Physics, 2009, 23(3): 173-180. (in Chinese)
    [13]
    Tonkov E Y, Pomyatovsky E G. Phase Transformations of Elements under High Pressure[M]. Boca Raton, FL: CRC Press, 2005: 148-157.
    [14]
    Pélissier J L, Wetta N. A model potential approach for bismuth(Ⅰ). Densification and melting curve calculation[J]. Physica A, 2001, 289(3): 459-478. https://www.sciencedirect.com/science/article/pii/S0378437100005148
    [15]
    Pélissier J L, Partouche-Sebban D. Pyrometry measurements on shock-heated bismuth using PMMA and sapphire windows[J]. Physica B, 2005, 364(1): 14-28. https://www.sciencedirect.com/science/article/pii/S0921452605006332
    [16]
    Partouche S D, Pélissier J L, Anderson W W, et al. Investigation of shock-induced light from sapphire for use in pyrometry studies[J]. Physica B, 2005, 364(1): 1-13. https://www.sciencedirect.com/science/article/pii/S0921452605005557
    [17]
    Johnson J N, Hayes D B, Asay J R. Equations of state and shock-induced transformations in solid Ⅰ-solid Ⅱ-liquid bismuth[J]. J Phys Chem Solids, 1974, 35(4): 501-515. doi: 10.1016/S0022-3697(74)80004-1
    [18]
    Kane J O, Smith R F. Modeling non-equilibrium phase transitions in isentropically compressed Bi[C]//Furnish M D, Elert M L, Russell Th P, et al. Shock Compression of Condensed Matter-2005. New York: AIP, 2006: 244.
    [19]
    Marsh S P. LASL Shock Hugoniot Data[Z]. Berkeley, CA: University of California Press, 1980: 23.
    [20]
    Walsh J M, Rice M H, McQeen R G, et al. Shock-wave compressions of twenty-seven metals. Equations of state of metals[J]. Phys Rev, 1957, 108(2): 196. doi: 10.1103/PhysRev.108.196
    [21]
    Hayes D B. Wave propagation in a condensed medium with N transforming phases: Application to solidⅠ-solid Ⅱ-liquid bismuth[J]. J Appl Phys, 1975, 46(8): 3438-3443. doi: 10.1063/1.322065
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(10)  / Tables(3)

    Article Metrics

    Article views(6678) PDF downloads(153) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return