Volume 28 Issue 6
Mar 2015
Turn off MathJax
Article Contents
JIANG Yi-Xuan, WANG Xing-Zhe, HE Hong-Liang. Channel Induced Electro-Mechanical Breakdown Model for Porous PZT95/5 Ceramics in Quasi-Static Electric Fields[J]. Chinese Journal of High Pressure Physics, 2014, 28(6): 680-685. doi: 10.11858/gywlxb.2014.06.006
Citation: JIANG Yi-Xuan, WANG Xing-Zhe, HE Hong-Liang. Channel Induced Electro-Mechanical Breakdown Model for Porous PZT95/5 Ceramics in Quasi-Static Electric Fields[J]. Chinese Journal of High Pressure Physics, 2014, 28(6): 680-685. doi: 10.11858/gywlxb.2014.06.006

Channel Induced Electro-Mechanical Breakdown Model for Porous PZT95/5 Ceramics in Quasi-Static Electric Fields

doi: 10.11858/gywlxb.2014.06.006
  • Received Date: 25 Jun 2012
  • Rev Recd Date: 09 Sep 2012
  • As a promising candidate material in explosive power supplies, the porous PZT95/5 ferroelectric ceramics exhibit attractive advantages in engineering applications.However, the electrical breakdown of ferroelectric ceramics usually reduces their discharge efficiency, and even results in failure of the explosive power supply.In this paper, we presented a theoretical model of electro-mechanical breakdown for the porous PZT95/5 ferroelectric ceramics in quasi-static electric fields.The model is based on the mechanism of electro-mechanical breakdown and partial discharges in conducting channels generated inside the ceramics.Theoretical predictions of the critical electric-field breakdown strength of the ferroelectric ceramics with different porosities are carried out, and show good agreements with the experimental results.The characteristic size of the conducting channel increases with the porosity, which causes a significant reduce in the critical electric-field breakdown strength.

     

  • loading
  • [1]
    Setchell R E. Shock wave compression of the ferroelectric ceramic Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3: Microstructural effects[J]. J Appl Phys, 2007, 101(5): 053525. doi: 10.1063/1.2697428
    [2]
    刘高旻, 张毅, 杜金梅, 等. PZT95/5-2Nb铁电陶瓷脉冲换能电输出[J].功能材料与器件学报, 2007, 13(4): 371-374. http://www.cnki.com.cn/Article/CJFDTotal-GNCQ200704012.htm

    Liu G M, Zhang Y, Du J M, et al. Electrical output of PZT95/5-2Nb pulsed power supply[J]. Journal of Functional Materials and Devices, 2007, 13(4): 371-374. (in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-GNCQ200704012.htm
    [3]
    陈学峰, 刘雨生, 冯宁博, 等.冲击压力和温度老化对PZT95/5铁电陶瓷放电的影响[J].电子元件与材料, 2009, 28(7): 1-4. http://d.wanfangdata.com.cn/Periodical/dzyjycl200907001

    Chen X F, Liu Y S, Feng N B, et al. Effects of shock pressure and temperature aging on the discharge behavior of PZT95/5 ferroelectric ceramics[J]. Electronic Components and Materials, 2009, 28(7): 1-4. (in Chinese) http://d.wanfangdata.com.cn/Periodical/dzyjycl200907001
    [4]
    Storz L J, Dungan R H. A study of the electrical, mechanical, and microstructural properties of 95/5 PZT as a function of pore former type and concentration, SAND 85-1612[R]. USA: Sandia National Laboratories, 1986.
    [5]
    Tuttle B A, Yang P, Gieske J H, et al. Pressure-induced phase transformation of controlled-porosity Pb(Zr0.95Ti0.05)O3 ceramics[J]. J Am Ceram Soc, 2001, 84(6): 1260-1264. doi: 10.1111/j.1151-2916.2001.tb00826.x/full
    [6]
    Yang H, Dong X L, Zhong N, et al. Dielectric breakdown properties of Zr-rich lead zirconate titanate ceramics[J]. Jpn J Appl Phys, 2004, 43(11A): 7579-7582. doi: 10.1143/JJAP.43.7579
    [7]
    曾涛, 董显林, 毛朝梁, 等.孔隙率及晶粒尺寸对多孔PZT陶瓷介电和压电性能的影响及机理研究[J].物理学报, 2006, 55(6): 3073-3079. http://www.cnki.com.cn/Article/CJFDTotal-WLXB200606072.htm

    Zeng T, Dong X L, Mao C L, et al. Effects of porosity and grain sizes on the dielectric and piezoelectric properties of porous PZT ceramics and their mechanism[J]. Acta Physica Sinica, 2006, 55(6): 3073-3079. (in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-WLXB200606072.htm
    [8]
    Zeng T, Dong X L, Mao C L, et al. Effects of pore shape and porosity on the properties of porous PZT 95/5 ceramics[J]. J Eur Ceram Soc, 2007, 27(4): 2025-2029. doi: 10.1016/j.jeurceramsoc.2006.05.102
    [9]
    Nie H C, Feng N B, Chen X F, et al. Enhanced ferroelectric properties of intragranular-porous Pb(Zr0.95Ti0.05)O3 ceramic fabricated with carbon nanotubes[J]. J Am Ceram Soc, 2010, 93(3): 642-645. doi: 10.1111/j.1551-2916.2009.03479.x
    [10]
    Setchell R E. Shock wave compression of the ferroelectric ceramic Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3: Depoling currents[J]. J Appl Phys, 2005, 97(1): 013507. doi: 10.1063/1.1828215
    [11]
    Feng N B, Nie H C, Chen X F, et al. Depoling of porous Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 ferroelectric ceramics under shock wave load[J]. Current Appl Phys, 2010, 10(6): 1387-1390. doi: 10.1016/j.cap.2010.04.012
    [12]
    Sindeyev Y G, Yurkevich V E. Electrical breakdown in ferroelectric ceramics(a review)[J]. Ferroelelectrics, 1990, 110: 193-218. doi: 10.1080/00150199008008916
    [13]
    Zhou Y X, Yoshimura N. Short-time DC breakdown phenomena in BaTiO3-based multilayer ceramic capacitors[J]. Jpn J Appl Phys, 1999, 38: 1412-1417. doi: 10.1143/JJAP.38.1412
    [14]
    Shin B C, Kim S C, Nahm C W, et al. Nondestructive testing of ceramic capacitors by partial discharge method[J]. Mater Lett, 2001, 50(2): 82-86. http://www.sciencedirect.com/science/article/pii/S0167577X00004201
    [15]
    杨洪.高抗电强度PZT95/5型铁电陶瓷的研制及击穿机理的研究[D].上海: 上海硅酸盐研究所, 2006: 50-78.

    Yang H. Fabrication and breakdown mechanism research of PZT95/5 ceramics with high dielectric breakdown properties[D]. Shanghai: Shanghai institute of ceramics, 2006: 50-78. (in Chinese)
    [16]
    Geis S, Fricke J, Löbmann P. Electrical properties of PZT aerogels[J]. J Euro Ceram Soc, 2002, 22(7): 1155-1161. doi: 10.1016/S0955-2219(01)00426-5
    [17]
    曾涛.多孔PZT压电和铁电陶瓷的制备与性能研究[D].上海: 上海硅酸盐研究所, 2007: 65-83.

    Zeng T. Fabrication and properties of porous PZT based piezoelectric and ferroelectric ceramics[D]. Shanghai: Shanghai Institute of Ceramics, 2007: 65-83. (in Chinese)
    [18]
    Gerson R, Marshall T C. Dielectric breakdown of porous ceramics[J]. J Appl Phys, 1959, 30(11): 1650-1653. doi: 10.1063/1.1735030
    [19]
    冯宁博, 贺红亮, 董显林.高应变率加载下材料的损伤破碎规律[J].高能量密度物理, 2007, (4): 152-164. http://www.cqvip.com/QK/97600A/20074/26215254.html

    Feng N B, He H L, Dong X L. Damage and broken laws of materials in the high strain rate loading[J]. High Energy Density Physics, 2007, (4): 152-164. (in Chinese) http://www.cqvip.com/QK/97600A/20074/26215254.html
    [20]
    张福平, 杜金梅, 刘雨生, 等. PZT95/5陶瓷电致失效机理研究[J].物理学报, 2011, 60(5): 057701. http://www.cqvip.com/QK/94684X/20115/37798769.html

    Zhang F P, Du J M, Liu Y S, et al. Failure mechanism of PZT95/5 under direct current and pulsed electric field[J]. Acta Phys Sinica, 2011, 60(5): 057701. (in Chinese) http://www.cqvip.com/QK/94684X/20115/37798769.html
    [21]
    Coelho R, Aladenize B.电介质材料及其介电性能[M].张治文, 译.北京: 科学出版社, 2000: 162-192.

    Coelho R, Aladenize B. The Dielectric Material and Its Dielectric Properties[M]. Translated by Zhang Z W. Beijing: Science Press, 2000: 162-192. (in Chinese)
    [22]
    Crichton G C, Karlsson P W, Pedersen A. Partial discharges in ellipsoidal and spheroidal voids[J]. IEEE Trans Electr Insul, 1989, 24(2): 335-342. doi: 10.1109/14.90292
    [23]
    Mcallister I W, Crichton G C. Influence of bulk dielectric polarization upon partial discharge transients effect of heterogeneous dielectric geometry[J]. IEEE T Dielect El In, 2000, 7(1): 124-132. doi: 10.1109/94.839350
    [24]
    Pedersen A, Crichton G C, Mcallister I W. The theory and measurement of partial discharge transients[J]. IEEE Trans Electr Insul, 1991, 26(3): 487-497. doi: 10.1109/14.85121
    [25]
    Stark K H, Garton C G. Electric strength of irradiated polythene[J]. Nature, 1955, 176(4495): 1225-1226. doi: 10.1038/1761225a0
    [26]
    Fothergill J C. Filamentary electromechanical breakdown[J]. IEEE Trans Electr Insul, 1991, 26(6): 1124-1129. doi: 10.1109/14.108149
    [27]
    Schneider G A. Influence of electric field and mechanical stresses on the fracture of ferroelectrics[J]. Annu Rev Mater Res, 2007, 37: 491-538. doi: 10.1146/annurev.matsci.37.052506.084213
    [28]
    Banno H. Effects of shape and volume fraction of closed pores on dielectric elastic and electromechanical properties of dielectric and piezoelectric ceramics: A theoretical approach[J]. Am Ceram Soc Bull, 1987, 66(9): 1332-1337. http://www.researchgate.net/publication/279589309_Effects_of_Shape_and_Volume_Fraction_of_Closed_Pores_on_Dielectric_Elastic_and_Electromechanical_Properties_of_Dielectric_and_Piezoelectric_CeramicsA_Theoretical_Approach
    [29]
    Phani K K, Niyogi S K. Young's modulus of porous brittle solids[J]. J Mater Sci, 1987, 22: 257-263. doi: 10.1007/BF01160581
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(2)  / Tables(1)

    Article Metrics

    Article views(6357) PDF downloads(328) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return