High Temperature Stable Assembly Designed for Cubic Press

HE Qiang; TANG Jun-Jie; WANG Fei; LIU Xi

doi:10.11858/gywlxb.2014.02.003

Volume 28 Issue 2

Apr 2015

Turn off MathJax

Article Contents

Chinese Journal of High Pressure Physics > 2014 > 28(2): 145-151.

HE Qiang, TANG Jun-Jie, WANG Fei, LIU Xi. High Temperature Stable Assembly Designed for Cubic Press[J]. Chinese Journal of High Pressure Physics, 2014, 28(2): 145-151. doi: 10.11858/gywlxb.2014.02.003

Citation:

HE Qiang, TANG Jun-Jie, WANG Fei, LIU Xi. High Temperature Stable Assembly Designed for Cubic Press[J]. Chinese Journal of High Pressure Physics, 2014, 28(2): 145-151. doi: 10.11858/gywlxb.2014.02.003

Citation:

PDF( 2430 KB)

High Temperature Stable Assembly Designed for Cubic Press

doi: 10.11858/gywlxb.2014.02.003

School of Earth and Space Sciences, Peking University, Beijing 100871, China

Received Date: 16 Apr 2013
Rev Recd Date: 23 Jun 2013

Abstract

Abstract

Changing the distribution of the thermal couple, a new experimental assembly, which is stable at extremely high temperatures, has been developed for the cubic press.Test experiments showed that at 5 GPa, this new experimental assembly can be stable at 1 600, 1 800 and 2 000 ℃ for more than 48 hours, about 30 h and about 10 h, respectively.Additionally, the temperature gradient in the new experimental assembly is very low:at 1 454 ℃, it is about 27 ℃/mm in the 4 mm long central part of the graphite heater.Long stable duration at extremely high temperatures and low temperature gradient make this new experimetal assembly suitable for the high-pressure experimentation in Geosciences.
- cubic press,
- experimental assembly design,
- high temperature stability,
- thermal couple distribution

FullText(HTML)

References(25)

References

[1]	Nishiyama N, Wang Y B, Sanehira T, et al. Development of the multi-anvil assembly 6-6 for DIA and D-DIA type high-pressure apparatuses[J]. High Press Res, 2008, 28(3): 307-314. doi: 10.1080/08957950802250607
[2]	Wang H K, He D W, Tan N, et al. Note: An anvil-preformed gasket system to extend the pressure range for large volume cubic presses[J]. Rev Sci Instrum, 2010, 81(11): 116102. doi: 10.1063/1.3488606
[3]	Liu X, Chen J L, Tang J J, et al. A large volume cubic press with a pressure-generating capability up to about 10 GPa[J]. High Press Res, 2012, 32(2): 239-254.
[4]	Ren G H, Xie H S, Xie X D. An experimental melting-crystallization study on basalt at high pressures[J]. Chinese Journal of Geochemistry, 1991, 10(2): 174-179. doi: 10.1007/BF02837717
[5]	Chang L L, Chen Z Q, Liu X, et al. Expansivity and compressibility of wadeite-type K₂Si₄O₉ determined by in situ high T/p experiments, and their implication[J]. Phys Chem Miner, 2013, 40(1): 29-40.
[6]	Liu X, Wang S C, He Q, et al. Thermal elastic behavior of CaSiO₃-walstromite: A powder X-ray diffraction study up to 900 ℃[J]. Am Mineral, 2012, 97(2/3): 262-267.
[7]	闻卫军, 周文戈, 范大伟, 等. 2.0 GPa, 850-1 070 ℃条件下多硅白云母榴辉岩脱水熔融研究[J].矿物岩石地球化学通报, 2012, 31(6): 622-634. Wen W J, Zhou W G, Fan D W, et al. Dehydration melting of a phengite-bearing eclogite at 2.0 GPa and 850-1 070 ℃-constraints on the petrogenesis of the early cretaceous, K-rich adakite in Dabie orogenic belt[J]. Bulletin of Mineralogy, Petrology and Geochemistry, 2012, 31(6): 622-634. (in Chinese)
[8]	Zhou W G, Xie H S, Liu Y G, et al. Dehydration melting of solid amphibolite at 2.0 GPa: Effects of time and temperature[J]. Sci China Earth Sci, 2005, 48(8): 1120-1133. doi: 10.1360/01yd0534
[9]	Cordier P, Rubie D C. Plastic deformation of minerals under extreme pressure using a multi-anvil apparatus[J]. Mater Sci Eng A, 2001, 309/310: 38-43. doi: 10.1016/S0921-5093(00)01795-0
[10]	Kawazoe T, Nishiyama N, Nishihara Y, et al. Pressure generation to 25 GPa using a cubic anvil apparatus with a multi-anvil 6-6 assembly[J]. High Press Res, 2010, 30(1): 167-174. doi: 10.1080/08957950903503912
[11]	Wang Y B, Durham W B, Getting I C, et al. The deformation-DIA: A new apparatus for high temperature triaxial deformation to pressures up to 15 GPa[J]. Rev Sci Instrum, 2003, 74(6): 3002. doi: 10.1063/1.1570948
[12]	Irifune T, Kurio A, Sakamoto S, et al. Ultrahard polycrystalline diamond from graphite[J]. Nature, 2003, 421: 599-560.
[13]	Qin J Q, He D W, Wang J H, et al. Is rhenium diboride a superhard material?[J]. Adv Mater, 2008, 20(24): 4780-4783. doi: 10.1002/adma.200801471
[14]	Xu C, He D W, Wang H K, et al. Nano-polycrystalline diamond formation under ultra-high pressure[J]. Int J Refract Met H, 2013, 36: 232-237. doi: 10.1016/j.ijrmhm.2012.09.004
[15]	Harlov D E, Milke R. Stability of corundum+quartz relative to kyanite and sillimanite at high temperature and pressure[J]. Am Mineral, 2002, 87(4): 424-432. doi: 10.2138/am-2002-0406
[16]	Liu J, Bohlen S R, Ernst W G. Stability of hydrous phases in subducting oceanic crust[J]. Earth Planet Sc Lett, 1996, 143: 161-171. doi: 10.1016/0012-821X(96)00130-6
[17]	陈晓芳, 贺端威, 王福龙, 等.基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定[J].高压物理学报, 2009, 23(2): 98-107. Chen X F, He D W, Wang F L, et al. Design and temperature calibration for heater cell of split-sphere high pressure apparatus based on the hinge-type cubic-anvil press[J]. Chinese Journal of High Pressure Physics, 2009, 23(2): 98-107. (in Chinese)
[18]	Liu X, Fleet M E. Phase relations of nahcolite and trona at high p-T conditions[J]. J Miner Petrol Sci, 2009, 104(1): 25-36. doi: 10.2465/jmps.080402
[19]	Fei Y W, Bertka C M. Mantle petrology: Field observations and high-pressure experimentation[C]// Mantle Petrology: Field Observations and High Pressure Experimentation. US: Spec Publ, 1999: 189-207.
[20]	Dobrzhinetskaya L F. Microdiamonds-frontier of ultrahigh-pressure metamorphism: A review[J]. Gondwana Res, 2012, 21(1): 207-223. doi: 10.1016/j.gr.2011.07.014
[21]	Zhu W G, Xie H S, Hu J, et al. Experimental studies on silicate structure of basaltic glasses quenched at 1 650 ℃ and 1-3.5 GPa[J]. Chinese Sci Bull, 1999, 44(5): 461-466. doi: 10.1007/BF02977889
[22]	刘芳, 刘永刚, 谢鸿森.六面顶压机高压腔体温度场的数值模拟[J].高压物理学报, 2012, 26(2): 135-140. Liu F, Liu Y G, Xie H S. Numerical simulation of temperature field in sample assembly of cubic press[J]. Chinese Journal of High Pressure Physics, 2012, 26(2): 135-140. (in Chinese)
[23]	Walter M J, Thibault Y, Wei K, et al. Characterizing experimental pressure and temperature conditions in multi-anvil apparatus[J]. Can J Phys, 1995, 73(5/6): 273-286.
[24]	Watson E B, Wark D A, Price J D, et al. Mapping the thermal structure of solid-media pressure assemblies[J]. Contrib Mineral Petr, 2002, 142(6): 640-652. doi: 10.1007/s00410-001-0327-4
[25]	冯吉福, 林峰, 李立惟, 等.六面顶压机上不同组装结构的温度研究[J].超硬材料工程, 2005, 21: 21-25. Feng J F, Lin F, Li L W, et al. Study on temperature of different assembly structure in cubic hinge apparatus[J]. Superhard Material Engineering, 2005, 21: 21-25. (in Chinese)

Relative Articles

Supplements(0)

Cited By

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Figures(6) / Tables(2)

Get Citation

PDF

XML

Article Metrics

Article views(7225) PDF downloads(470)

High Temperature Stable Assembly Designed for Cubic Press

doi: 10.11858/gywlxb.2014.02.003

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

High Temperature Stable Assembly Designed for Cubic Press

doi: 10.11858/gywlxb.2014.02.003

Abstract

References

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Export File

Citation

Format

Content