Citation: | LI Xin-E, ZU Jing, XU Peng. Dynamic Characteristic Analysis of Capacitive High Bore Pressure Tester[J]. Chinese Journal of High Pressure Physics, 2014, 28(1): 108-112. doi: 10.11858/gywlxb.2014.01.018 |
[1] |
张艳玲, 柳光辽.火炮膛压峰值的计算机测试系统[J].弹道学报, 1998, 10(2): 78-81.
Zhang Y L, Liu G L. A computer test system of gun peak chamber pressure[J]. Journal of Ballistics, 1998, 10(2): 78-81. (in Chinese)
|
[2] |
张记龙, 路宏年, 任树梅.武器膛压测试传感器动态响应误差分析方法[J].太原机械学院学报, 1993, 14(1): 22-26.
Zhang J L, Lu H N, Ren S M. The dynamic response error in chamber pressure measurement[J]. Journal of Taiyuan Institute of Machinery, 1993, 14(1): 22-26. (in Chinese)
|
[3] |
祖静, 张志杰, 裴东兴, 等.新概念动态测试[J].测试技术学报, 2004, 18(增): 1-9.
Zu J, Zhang Z J, Pei D X, et al. New concept dynamic test[J]. Journal of Test and Measurement Technology, 2004, 18(Supplement): 1-9. (in Chinese)
|
[4] |
李新娥, 祖静, 徐鹏.新型应变式高膛压测试系统研制[J].高压物理学报, 2011, 25(4): 310-316.
Li X E, Zu J, Xu P. A novel strain type high chamber pressure test system[J]. Chinese Journal of High Pressure Physics, 2011, 25(4): 310-316. (in Chinese)
|
[5] |
杨桂通.弹性力学[M].北京: 高等教育出版社, 2005.
Yang G T. Elastic Mechanics[M]. Beijing: Higher Education Press, 2005. (in Chinese)
|
[6] |
蒋学东, 李小平.厚壁圆筒在动载荷作用下的应力分析[J].江苏工业学院学报, 2004, 16(3): 8-13.
Jiang X D, Li X P. Analysis of the stress created by sudden load in the cylinder[J]. Journal of Jiangsu Polytechnic University, 2004, 16(3): 8-13. (in Chinese)
|
[7] |
孔德仁, 朱明武, 申爱平, 等.铜柱测压器动态特性分析及计算机仿真[J].火工品, 2001(2): 27-30.
Kong D R, Zhu M W, Shen A P, et al. Dynamical characteristics analysis of copper cylinder crusher gauge and computer simulation[J]. Initiators & Pyrotechnics, 2001(2): 27-30. (in Chinese)
|
[8] |
倪振华.振动力学[M].西安: 西安交通大学出版社, 1990.
Ni Z H. Vibration Mechanics[M]. Xi'an: Xi'an Jiaotong University Press, 1990. (in Chinese)
|