Citation: | WANG Hai-Yan, LIU Lin, CHEN Yan, ZHAO Jun, LIU Jian-Hua, ZHANG Rui-Jun. Effects of High Pressure Treatment on Micro-Mechanical Properties of 7075 Aluminum Alloy[J]. Chinese Journal of High Pressure Physics, 2013, 27(5): 768-772. doi: 10.11858/gywlxb.2013.05.018 |
Zhu Q F, Zhao Z H, Cui J Z, et al. Effect of casting speed on surface quality of horizontal direct chill casting 7075 aluminum alloy ingot [J]. Acta Metal Sin(Eng Lett), 2011, 24(5): 399-404.
|
Tajally M, Emadoddin E. Mechanical and anisotropic behaviors of 7075 aluminum alloy sheets [J]. Mater Des, 2011, 32(3): 1594-1599.
|
Mo J L, Zhu M H, Zheng J F, et al. Study on rotational fretting wear of 7075 aluminum alloy [J]. Tribol Int, 2010, 43(5): 912-917.
|
Hatamleh O, Forth S, Reynolds A P. Fatigue crack growth of peened friction stir-welded 7075 aluminum alloy under different load ratios [J]. J Mater Eng Perform, 2010, 19(1): 99-106.
|
Chen Y, Liu L, Wang Y H, et al. Microstructure evolution and thermal expansion of Cu-Zn alloy after high pressure heat treatment [J]. Trans Nonferrous Met Soc China, 2011, 21(10): 2205-2209.
|
Wu L L, Liu L, Liu J H, et al. Effects of high pressure heat treatment on microstructure and micro-mechanical properties of Cu77. 96Al22. 04 alloy [J]. Mater Trans, 2012, 53(3): 504-507.
|
Wang H Y, Liu J H, Peng G R, et al. Effects of high-pressure heat treatment on the solid-state phase transformation and microstructures of Cu61. 13Zn33. 94Al4. 93 alloys [J]. Chin Phys B, 2010, 19(9): 096203.
|
Lee D Y. An investigation of thermal aging effects on the mechanical properties of a Ni3Al-based alloy by nanoindentation [J]. J Alloy Compd, 2009, 480(2): 347-350.
|
Youn S W, Kang C G. Characterization of age-hardening behavior of eutectic region in squeeze-cast A356-T5 alloy using nanoindenter and atomic force microscope [J]. Mater Sci Eng A, 2006, 425(1): 28-35.
|
Fan G J, Jiang W H, Lin F X, et al. The effects of tensile plastic deformation on the hardness and Young's modulus of a bulk nanocrystalline alloy studied by nanoindentation [J]. J Mater Res, 2007, 22(5): 1235-1239.
|
Zhai C S, Yang L, Wang J, et al. Microstructure and nanoindentation mechanical properties of detonation sprayed coatings derived from Al2O3/TiO2 nanocomposite powders [J]. Journal of Inorganic Materials, 2005, 20(6): 1500-1509. (in Chinese)
|
翟长生, 杨力, 王俊, 等. A12O3/TiO2纳米复合粉体爆炸喷涂层微结构及纳米压痕力学特性 [J]. 无机材料学报, 2005, 20(6): 1500-1509.
|
Ren M X, Li B S, Yang C, et al. Hardness and elastic modulus of microcastings by nanoindentation [J]. The Chinese Journal of Nonferrous Metals, 2008, 18(2): 231-236. (in Chinese)
|
任明星, 李邦盛, 杨闯, 等. 纳米压痕法测定微铸件硬度及弹性模量 [J]. 中国有色金属学报, 2008, 18(2): 231-236.
|