Citation: | GAO Yong-Hong, GU Xiao-Hui, WANG Feng-Ying. Powder Liner Density Effect on the Performance of Shaped Charge Jet[J]. Chinese Journal of High Pressure Physics, 2013, 27(4): 556-560. doi: 10.11858/gywlxb.2013.04.014 |
Azharonok V V, Krat'ko L E, Goncharik S V, et al. Character of the fast jet efflux upon detonation of shaped charges [J]. J Eng Phys Thermophys, 2008, 81(3): 494-498.
|
Lei F B, Cao D L. Numerical simulation of the shaped charge jet from tungsten-copper powder liner [J]. Chinese Journal of Explosives Propellants, 2010, 33(6): 73-75. (in Chinese)
|
雷锋斌, 曹端林. 钨铜粉末药型罩形成聚能射流的数值模拟 [J]. 火炸药学报, 2010, 33(6): 73-75.
|
Yu R, Li F J, Xue X Y, et al. Study on the influence of rate of liner thickness change on the penetration [J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2010, 30(1): 134-136. (in Chinese)
|
郁锐, 李福金, 薛鑫莹, 等. 药型罩壁厚变化率对破甲威力影响的研究 [J]. 弹箭与制导学报, 2010, 30(1): 134-136.
|
Wang C, Fu X L, Ning J G. Numerical simulation of shaped charge jet formation under different ways of initiation [J]. Transactions of Beijing Institute of Technology, 2006, 26(5): 401-404. (in Chinese)
|
王成, 付晓磊, 宁建国. 起爆方式对聚能射流性能影响的数值分析 [J]. 北京理工大学学报, 2006, 26(5): 401-404.
|
Jing Q B, Jing Z Y, Shi J. The influence of metal particles arrangement of powder shaped charge liner and its thermal treatment on performance of jet [J]. Chinese Journal of Explosives Propellants, 2008, 31(1): 42-44. (in Chinese)
|
景青波, 景振禹, 石健. 粉末药型罩金属粒度级配及热处理对聚能射流性能的影响 [J]. 火炸药学报, 2008, 31(1): 42-44.
|
Zhang X R, Wu C, Huang F L. Penetration of shaped charge jets with tungsten-copper and copper liners at the same explosive-to-liner mass ratio into water [J]. Shock Waves, 2010, 20(3): 263-267.
|
Zygmunt B, Wilk Z. Formation of jets by shaped charges with metal powder liners [J]. Propell Explos Pyrot, 2008, 33(6): 482-487.
|
Proskuryakov E V, Sorokin M V, Fomin V M. Rebounding of a shaped-charge jet [J]. J Appl Mech Tech Phys, 2007, 48(5): 633-635.
|
Chen W G, Zhang Y. Influence of liner with different material model on simulation results [J]. Science Technology and Engineering, 2010, 10(13): 3227-3229. (in Chinese)
|
陈文刚, 张越. 不同材料模型的药型罩对仿真结果的影响 [J]. 科学技术与工程, 2010, 10(13): 3227-3229.
|
Hirsch E. Scaling of the shaped charge jet break-up time [J]. Propell Explos Pyrot, 2006, 31(3): 230-233.
|
Jackowski A, Wlodarczyk E. The influence of repressing liners made from sintered copper on jet formation [J]. J Mater Process Technol, 2006, 171(1): 21-26.
|
Chen X L, Hang Y H, Fan Z B, et al. A coupling computation method for penetration of shaped charge jet [J]. Explosion and Shock Waves, 1998, 18(4): 317-322. (in Chinese)
|
陈贤林, 杭义洪, 范中波, 等. 聚能射流侵彻的一种耦合算法 [J]. 爆炸与冲击, 1998, 18(4): 317-322.
|
Nagao Y, Kibe S, Shimizu T, et al. Improvement of conical shaped charge system and comparison of the test result between CSC and gas gun [J]. Acta Astronaut, 2007, 60(8/9): 763-769.
|
Held M. Predominance of shaped charge diameter to performance quality against special targets [J]. Propell Explos Pyrot, 2005, 30(6): 435-437.
|