Volume 25 Issue 6
Apr 2015
Turn off MathJax
Article Contents
WEN Li-Jing, DUAN Zhuo-Ping, ZHANG Zhen-Yu, OU Zhuo-Cheng, HUANG Feng-Lei. An Elastic/Viscoplastic Pore Collapse Model of Double-Layered Hollow Sphere for Hot-Spot Ignition in Shocked Explosives[J]. Chinese Journal of High Pressure Physics, 2011, 25(6): 493-500. doi: 10.11858/gywlxb.2011.06.003
Citation: WEN Li-Jing, DUAN Zhuo-Ping, ZHANG Zhen-Yu, OU Zhuo-Cheng, HUANG Feng-Lei. An Elastic/Viscoplastic Pore Collapse Model of Double-Layered Hollow Sphere for Hot-Spot Ignition in Shocked Explosives[J]. Chinese Journal of High Pressure Physics, 2011, 25(6): 493-500. doi: 10.11858/gywlxb.2011.06.003

An Elastic/Viscoplastic Pore Collapse Model of Double-Layered Hollow Sphere for Hot-Spot Ignition in Shocked Explosives

doi: 10.11858/gywlxb.2011.06.003
  • Received Date: 10 Oct 2010
  • Rev Recd Date: 28 Mar 2011
  • Publish Date: 15 Dec 2011
  • An elastic/viscoplastic pore collapse model of double-layered hollow sphere, in which the effect of the binder in Plastic Bonded Explosives (PBX) was taken into account, was developed as a hot-spot ignition model in shocked explosives. The space and time distributions of the velocity, strain, temperature and chemical reaction rate in shock compression of the explosive hollow sphere were theoretically calculated. A new expression of reaction rate equation was obtained for the hot-spot ignition. The three-term reaction rate model, consisting of the new hot-spot ignition term, the slow burning term at low-pressure from Kim and the high-pressure reaction term from ZHANG Zhen-Yu, was implemented into the two-dimensional, hydrodynamic finite-element code DYNA2D and used to simulate the one-dimensional shock initiation process of PBX-9501 explosive. The numerical results show that the model can successfully explain the influence of strength and content of the binder in PBX on the shock initiation, and that of particle size and porosity as well.

     

  • loading
  • Mader C L. Numerical Modeling of Detonation [M]. Berkeley, USA: University of California Press, 1979.
    Lee E L, Tarver C M. Phenomenological Model of Shock Initiation in Heterogeneous Explosives [J]. Phys Fluids, 1980, 23(12): 2362-2372.
    Tarver C M, Hallquist J O. Modeling Two-Dimensional Shock Initiation and Detonation Wave Phenomena in PBX-9404 and LX-17 [A]//Short J M. Proceedings of the 7th Symposium (International) on Detonation [C]. Annapolis, MD, 1981: 488-497.
    Tarver C M, Hallquist J O, Erickson L M. Modeling Short Pulse Duration Shock Initiation of Solid Explosives [A]//Proceedings of the 8th Symposium (International) on Detonation [C]. Albuquerque, NM, 1985: 951-961.
    Johnson J N, Tang P K, Forest C A. Shock-Wave Initiation of Heterogeneous Reactive Solids [J]. J Appl Phys, 1985, 57(9): 4323-4334.
    Tang P K, Johnson J N, Forest C A. Modeling Heterogeneous High Explosive Burn with an Explicit Hot-spot Process [A]//Proceedings of the 8th Symposium (International) on Detonation [C]. Albuquerque, NM, 1985: 52-61.
    Field J E. Hot Spot Ignition Mechanisms for Explosives [J]. Accounts Chem Res, 1992, 25: 489-496.
    Kim K, Sohn C H. Modeling of Reaction Bulidup Processes in Shocked Porous Explosives [A]//Proceedings of the 8th Symposium (International) on Detonation [C]. Albuquerque, NM, 1985: 926-933.
    Kim K. Development of a Model of Reaction Rates in Shocked Multicomponent Explosives [A]//Proceedings of the 9th Symposium (International) on Detonation [C]. Portland, OR, 1989: 593-603.
    Wen L J, Duan Z P, Zhang Z Y, et al. A Pore Collapse Model of Double Hollow Sphere with Rigid-Plastic Binders for Hot-Spot Ignition in Shocked Explosives [J]. Transactions of Beijing Institute of Technology, 2011, 31(8): 883-887. (in Chinese)
    温丽晶, 段卓平, 张震宇, 等. 刚塑性粘结剂的双球壳塌缩热点反应模型 [J]. 北京理工大学学报, 2011, 31(8): 883-887.
    Zhang Z Y, Lu F Y, Wang Z B, et al. Studies on High-Pressure Reaction Rate of PBX-9404 [J]. Explosion and Shock Waves, 1999, 19(4): 360-364. (in Chinese)
    张震宇, 卢芳云, 王志兵, 等. PBX-9404炸药高压反应速率方程的研究 [J]. 爆炸与冲击, 1999, 19(4): 360-364.
    Perzyna P. Fundamental Problems in Viscoplasticity [J]. Adv Appl Mech, 1966, 9: 350-352.
    Liang Z Y, Huang F L, Zhang Z Y. Numerical Simulation of Damaged Explosive in Shock Detonation [J]. Transactions of Beijing Institute of Technology, 2006, 26(12): 1047-1051. (in Chinese)
    梁增友, 黄风雷, 张震宇. 损伤炸药的冲击起爆数值模拟 [J]. 北京理工大学学报, 2006, 26(12): 1047-1051.
    Tian Z D, Zhang Z Y. A Mesomechanic Model of Shock Initiation in PBX-9404 Explosives [J]. Chinese Journal of Energetic Materials, 2007, 15(5): 464-467. (in Chinese)
    田占东, 张震宇. PBX-9404炸药冲击起爆细观反应速率模型 [J]. 含能材料, 2007, 15(5): 464-467.
    Liang Z Y, Huang F L, Zhang Z Y. Study on New Reaction Rate Function Model of PBX-9404 for Damaged Explosive Initiation Behavior [J]. Explosion and Shock Waves, 2008, 28(1): 38-43. (in Chinese)
    梁增友, 黄风雷, 张震宇. PBX-9404的化学反应速率方程及起爆特性 [J]. 爆炸与冲击, 2008, 28(1): 38-43.
    Tarver C M, Forbes J W, Garcia F, et al. Manganin Gauge and Reactive Flow Modeling Study of the Shock Initiation of PBX 9501 [A]//Furnish M D, Thadhani N N, Horie Y. Shock Compression of Condensed Matter-2001 [C]. New York: AIP Conference Proceedings, 2002:1043-1046.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Article Metrics

    Article views(10933) PDF downloads(1115) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return