Citation: | WANG Zhi-Hua, LI Zhi-Qiang, REN Hui-Lan, ZHAO Long-Mao. Finite Element Analysis on the Influence of PMMA Geometry on Explosion Cutting[J]. Chinese Journal of High Pressure Physics, 2010, 24(1): 43-48 . doi: 10.11858/gywlxb.2010.01.008 |
Yang W B, Xi J Y, Sun M, et al. The Application of Explosive Technique in the Engineering of Demolishing Ship [J]. Ship Engineering, 1997, 6: 31-33. (in Chinese)
|
杨文彬, 奚进一, 孙明, 等. 爆炸切割技术在拆船工程中的应用 [J]. 船舶工程, 1997, 6: 31-33.
|
Zhou R, Feng S S, Wu C. A Study on the Rupturing Effects upon a Metal Plate under the Contact Explosion of Linear Explosive [J]. Journal of Beijing Institute of Technology, 2001, 21(4): 405-409. (in Chinese)
|
周睿, 冯顺山, 吴成. 条形装药接触爆炸对金属靶板作用的效应 [J]. 北京理工大学学报, 2001, 21(4): 405-409.
|
Ning J G, Wang C, Ma T B. Numerical Analysis of the Shaped Charge Jet with Large Cone Angle [J]. Int J Nonlinear Sci Numer Simulat, 2006, 7(1): 71-78.
|
Ma T B, Wang C, Ning J G. Numerical Study of the Shaped Charges [J]. Int J Modern Phys B, 2008, 22: 5749-5754.
|
Han M Z. Present Status and Prospects for Foreign Aviation Life-Support Technology [J]. Aeronatutical Science and Technology, 2003, (2): 22-25. (in Chinese)
|
韩梦珍. 国外航空救生技术现状及展望 [J]. 航空科学技术, 2003, (2): 22-25.
|
Fang Z. Methods for Predication Successful Ejection Seat Canopy Penertration [J]. International Aviation, 1994, 2: 61-62. (in Chinese)
|
方芷. 预测弹射座椅成功穿盖的方法 [J]. 国际航空, 1994, 2: 61-62.
|
Wang W. The Effective Approach of Study on Penetration Ejection [J]. Aircraft Design, 1985, (3): 28-32. (in Chinese)
|
王伟. 研究飞机穿盖弹射的有效途径 [J]. 飞机设计, 1985, (3): 28-32.
|
Li Z Q, Liu X M, Zhao Y G, et al. Experimental Study and Finite Element Analysis of Linear Cutting Aerial PMMA Using Micro Detonation Cord [J]. Explosive and Shock Waves, 2007, 27(5): 385-389. (in Chinese)
|
李志强, 刘晓明, 赵勇刚, 等. 微爆索线性切割航空有机玻璃的实验研究和有限元分析 [J]. 爆炸与冲击, 2007, 27(5): 385-389.
|
Berstad T, Hopperstad O S, Lademo O G, et al. Computational Model of Ductile Damage and Fracture in Shell Analysis [A]//Second European LS-DYNA Conference [C]. Gothenburg, Sweden, 1999.
|