爆炸焊接斜碰撞过程的数值模拟

李晓杰; 莫非; 闫鸿浩; 张程娇

doi:10.11858/gywlxb.2011.02.014

爆炸焊接斜碰撞过程的数值模拟

doi: 10.11858/gywlxb.2011.02.014

大连理工大学工程力学系工业装备结构分析国家重点实验室，辽宁大连 116023

详细信息

通讯作者:
莫非

计量
- 文章访问数: 7616
- HTML全文浏览量: 485
- PDF下载量: 712
出版历程
- 收稿日期: 2010-03-09
- 修回日期: 2010-06-09
- 刊出日期: 2011-04-15

Numerical Simulation of the Oblique Collision in Explosive Welding

State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116023, China

More Information

Corresponding author: MO Fei

摘要

摘要: 借助动力学分析软件ANSYS/LS-DYNA 11.0，建立了考虑材料强度的流体弹塑性力学模型，运用光滑粒子流体动力学（SPH）方法，对爆炸焊接斜碰撞过程进行了数值模拟。界面波和射流的模拟结果与爆炸焊接生产实际中的现象较为吻合，说明采用SPH方法对爆炸焊接斜碰撞过程进行模拟研究是有科学价值的。
- 爆炸焊接 /
- 斜碰撞 /
- 界面波 /
- 光滑粒子流体动力学方法 /
- 流体弹塑性力学模型 /
- 射流
Abstract: Using the software of ANSYS/LS-DYNA 11.0 and the method of smoothed particle hydrodynamics (SPH), the formation process of the oblique collision in explosive welding was simulated, where the elastic-plastic hydrodynamic model with the material strength was used. The simulation results showed that the shapes of the interface wave and the metal jet were consistent with the practical phenomena of explosive welding. Therefore, it is valuable to research the formation process of the oblique collision in explosive welding with SPH method.
- explosive welding /
- oblique collision /
- interface wave /
- SPH method /
- elastic-plastic hydrodynamic model /
- jet

HTML全文

参考文献(19)

Zhu X, Zhang Z H, Liu R Q, et al. Experimental Study on the Explosion Resistance of Cabin near[1] Akbari Mousavi A A, Al-Hassani S T S. Numerical and Experimental Studies of the Mechanism of the Wavy Interface Formations in Explosive/Impact Welding [J]. J Mech Phys Solids, 2005, 53(11): 2501-2528.

Wang H H. Study of Experiment and Numerical Simulation for Tube vs Plate Explosive Welding [D]. Hohhot: Inner Mongolia University of Technology, 2009. (in Chinese)

王呼和. 管板爆炸焊接实验研究及数值模拟 [D]. 呼和浩特: 内蒙古工业大学, 2009.

Chen Z P. Numerical Analysis of Cladding Process of Monel Alloy/Cu Explosive Cladding Bar [D]. Changsha: Central South University, 2008. (in Chinese)

陈忠平. Monel/Cu爆炸复合棒的制备及复合过程数值模拟研究 [D]. 长沙: 中南大学, 2008.

Libersky L D, Petschek A G. High Strain Lagrangian Hydrodynamics: A Three-Dimensional SPH Code for Dynamic Material Response [J]. J Comput Phys, 1993, 109(1): 67-75.

Liu G R, Liu M B. Smoothed Particle Hydrodynamics: A Meshfree Particle Method [M]. Translated by Han X, Yang G, Qiang H F. Changsha: Hunan University Press, 2005: 295-297. (in Chinese)

Liu G R, Liu M B. 光滑粒子流体动力学--一种无网络粒子法 [M]. 韩旭, 杨刚, 强洪夫, 译. 长沙: 湖南大学出版社, 2005: 295-297.

Johnson G R, Cook W H. Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures [J]. Eng Fract Mech, 1985, 21(1): 31-48.

Shi D Y, Li Y C, Zhang S M. Dynamic Analysis Based on ANSYS/LS-DYNA 8. 1 [M]. Beijing: Tsinghua University Press, 2005: 117-118. (in Chinese)

时党勇, 李裕春, 张胜民. 基于ANSYS/LS-DYNA 8. 1进行显示动力分析 [M]. 北京: 清华大学出版社, 2005: 117-118.

LS-DYNA Keyword User's Manual [Z]. California: Livermore Software Technology Corporation, 2007.

LS-DYNA Theory Manual [Z]. California: Livermore Software Technology Corporation, 2005.

Wang B Q. Investigation on Bonding Interface of Explosive Welding Dissimilar Metal [D]. Dalian: Dalian University of Technology, 2005. (in Chinese)

王保奇. 异种金属爆炸焊接结合界面的研究 [D]. 大连: 大连理工大学, 2005.

Zhang D X, Li G H. An Experimental Relation between Interface Wave Form of Explosion Welding Mild Steel and Material Dimensionless Strength [J]. Explosion and Shock Waves, 1983, 3(2): 23-29. (in Chinese)

张登霞, 李国豪. 低碳钢爆炸焊接界面波与板材无量纲强度关系的试验研究 [J]. 爆炸与冲击, 1983, 3(2): 23-29.

Shao B H, Zhang K. Principle and Practice of Explosive Welding [M]. Dalian: Dalian University of Technology Press, 1987: 188-189. (in Chinese)

邵丙璜, 张凯. 爆炸焊接原理及其工程应用 [M]. 大连: 大连工学院出版社, 1987: 188-189.

施引文献

资源附件(0)

访问统计