鸟撞冲击下TC4钛合金平板的变形和破坏

贾林; 李从富; 邹学韬; 姚小虎

doi:10.11858/gywlxb.20200515

鸟撞冲击下TC4钛合金平板的变形和破坏

doi: 10.11858/gywlxb.20200515

贾林^1,,
李从富¹,
邹学韬²,
姚小虎^2,*, ,

1.
中国航发上海商用航空发动机制造有限责任公司，上海　201108
2.
华南理工大学土木与交通学院，广东广州　510641

基金项目: 国家自然科学基金（11672110，11472110）

详细信息

作者简介:
贾　林（1988－），男，硕士，工程师，主要从事发动机强度试验技术研究. E-mail：jialin20060598@126.com

通讯作者:
姚小虎（1974－），男，博士，教授，主要从事爆炸与冲击动力学研究. E-mail：yaoxh@scut.edu.cn

中图分类号: O347.3
计量
- 文章访问数: 8344
- HTML全文浏览量: 2997
- PDF下载量: 40
出版历程
- 收稿日期: 2020-02-24
- 修回日期: 2020-03-17

Deformation and Destruction of TC4 Titanium Alloy Plate under the Bird Impact

JIA Lin^1
,,
LI Congfu¹,
ZOU Xuetao²,
YAO Xiaohu^{2,*
, ,}

1.
AECC Commercial Aircraft Engine Manufacturing Co., Ltd., Shanghai 201108, China
2.
Civil Engineering and Transportation College, South University of Technoloy, Guangzhou 510641, Guangdong, China

摘要

摘要: 为了分析航空用TC4钛合金板材在鸟撞冲击下的动态响应，通过3D-DIC动态变形场测试技术，研究了鸟撞冲击过程中TC4钛合金平板变形场，并基于显式有限元分析软件ABAQUS，建立了鸟撞数值计算模型。将考虑拉压不对称性的修正von Mises屈服准则引入TC4钛合金材料的Johnson-Cook动态本构模型和动态损伤模型中，采用光滑粒子流体动力学方法（SPH）建立了鸟体模型。数值计算和鸟撞实验的对比结果表明，计算应变与实验结果吻合很好，验证了TC4钛合金鸟撞冲击数值分析模型的合理性和可靠性。
- TC4钛合金 /
- 鸟撞 /
- 光滑粒子流体动力学方法 /
- 剪切破坏
Abstract: In order to analyze the dynamic behavior of aerospace TC4 titanium alloy plane under the bird impact, the deformation field of TC4 titanium alloy plate subjected to the bird impact was studied by 3D-DIC dynamic deformation field test technology. Meanwhile, a numerical simulation model was established based on explicit finite element analysis software ABAQUS. In this model the Johnson-Cook dynamic constitutive relations was used to describe the property of TC4 titanium alloy, and the bird model was established with smooth particle method (SPH). Comparing the numerical and experimental results, it is concluded that the calculated strain can match the experimental results well. The rationality and reliability of numerical analysis of the bird impact on the TC4 titanium alloy model are verified.
- TC4 titanium alloy /
- bird impact /
- smoothed particle hydrodynamics method /
- shear failure

HTML全文

图 1 实验装置示意图

Figure 1. Schematic of experimental apparatus

下载: 全尺寸图片幻灯片

图 2 高速摄影机布局

Figure 2. High speed camera arrangement

下载: 全尺寸图片幻灯片

图 3 靶板尺寸

Figure 3. Size of target board

下载: 全尺寸图片幻灯片

图 4 149、167和180 m/s的鸟撞实验结果

Figure 4. Results of bird strike experiments at the speed of 149, 167 and 180 m/s

下载: 全尺寸图片幻灯片

图 5 TC4钛合金平板破坏照片

Figure 5. Failure of TC4 titanium alloy plate

下载: 全尺寸图片幻灯片

图 6 鸟弹的几何尺寸

Figure 6. Geometry of bird ball

下载: 全尺寸图片幻灯片

图 7 鸟撞数值计算模型

Figure 7. Numerical model of bird strike

下载: 全尺寸图片幻灯片

图 8 观测点布局

Figure 8. Distribution of observation points

下载: 全尺寸图片幻灯片

图 9 149 m/s鸟撞等效应力云图

Figure 9. Equivalent stress nephograms of bird impacting with the velocity of 149 m/s

下载: 全尺寸图片幻灯片

图 10 TC4钛合金平板鸟撞变形结果

Figure 10. Deformation of TC4 titanium alloy plate under the bird impact

下载: 全尺寸图片幻灯片

图 11 180 m/s工况下计算得到的TC4钛合金平板破坏过程

Figure 11. Failure process of TC4 titanium alloy plate calculated at 180 m/s

下载: 全尺寸图片幻灯片

图 12 位移-时间曲线的计算和实验结果对比

Figure 12. Comparison of calculated displacement-time curves with experimental results

下载: 全尺寸图片幻灯片

图 13 应变-时间曲线的计算与实验结果对比

Figure 13. Comparison of calculated strain-time curves with experimental results

下载: 全尺寸图片幻灯片

表 1 鸟体材料参数

Table 1. Material parameters of bird body

Density/（kg·m⁻³） Elastic modulus/GPa Poisson’s ratio Yield stress/MPa Failure strain Tangent modulus/MPa

928 0.068 0.49 0.69 1.25 5

下载: 导出CSV

表 2 TC4钛合金材料参数^[10-11]

Table 2. Parameters of TC4 titanium alloy^[10-11]

ρ/(g·cm⁻³) μ T_m/K A/MPa B/MPa n C m

4.430 0.33 1 878 1060 1090 0.884 0.0117 1.1
E/GPa ${\dot \varepsilon _{{0}}}$/s⁻¹ D₁ D₂ D₃ D₄ D₅
135 4 × 10⁻⁴ −0.090 0.270 0.480 0.014 3.870

下载: 导出CSV

表 3 TC4钛合金平板鸟撞最大位移

Table 3. Maximum displacement of titanium alloy plate impacted by a bird

Velocity/(m·s⁻¹) Method Maximum displacement/mm
S₁ S₂ S₃ S₄ S₅ S₆

149 Sim. 65 51 36 64 55 23
Exp. 68 60 38 63 53 25
167 Sim. 75 60 48 76 65 27
Exp. 80 59 47 76 63 24
180 Sim. 119 101 63 118 103 54
Exp. 117 90 53 103 95 50

下载: 导出CSV

参考文献(11)

[1]	黄旭, 朱知寿, 王红红. 先进航空钛合金材料与应用 [M]. 北京: 国防工业出版社, 2012. HUANG X, ZHU Z S, WANG H H. Advanced aeronautical titanium alloys and applications [M]. Beijing: National Defense Industry Press, 2012.
[2]	GUIDA M, MARULO F, MEO M, et al. SPH-Lagrangian study of bird impact on leading edge wing [J]. Composite Structures, 2011, 93(3): 1060–1071. doi: 10.1016/j.compstruct.2010.10.001
[3]	DE VUYST T, VIGNJEVIC R, CAMPBELL J C. Coupling between meshless and finite element methods [J]. International Journal of Impact Engineering, 2005, 31(8): 1054–1064. doi: 10.1016/j.ijimpeng.2004.04.017
[4]	张鼎逆, 上官倩芡, 刘富. 基于SPH方法的LY12-CZ铝合金平板鸟撞模型 [J]. 江苏大学学报: 自然科学版, 2016, 37(4): 418–422. doi: 10.3969/j.issn.1671-7775.2016.04.008 ZHANG D N, SHANGGUAN Q Q, LIU F. Model of bird impact on LY12-CZ aluminum alloy plate based on SPH [J]. Journal of Jiangsu University (Natural Science Edition), 2016, 37(4): 418–422. doi: 10.3969/j.issn.1671-7775.2016.04.008
[5]	刘军, 李玉龙, 刘元镛. 基于SPH方法的叶片鸟撞数值模拟研究 [J]. 振动与冲击, 2008, 27(9): 90–93. doi: 10.3969/j.issn.1000-3835.2008.09.022 LIU J, LI Y L, LIU Y Y. Numerical simulation study of bird-impact on a blade using SPH method [J]. Journal of Vibration and Shock, 2008, 27(9): 90–93. doi: 10.3969/j.issn.1000-3835.2008.09.022
[6]	刘富, 张嘉振, 童明波, 等. 2024-T3铝合金动力学实验及其平板鸟撞动态响应分析 [J]. 振动与冲击, 2014, 33(4): 113–118. doi: 10.3969/j.issn.1000-3835.2014.04.021 LIU F, ZHANG J Z, TONG M B, et al. Dynamic tests and bird impact dynamic response analysis for a 2024-T3 aluminum alloy plate [J]. Journal of Vibration and Shock, 2014, 33(4): 113–118. doi: 10.3969/j.issn.1000-3835.2014.04.021
[7]	LIU J, LI Y L, GAO X S. Bird strike on a flat plate: experiments and numerical simulations [J]. International Journal of Impact Engineering, 2014, 70: 21–37. doi: 10.1016/j.ijimpeng.2014.03.006
[8]	姚小虎, 韩强, 赵隆茂, 等. 飞机圆弧风挡的抗鸟撞击问题研究 [J]. 华南理工大学学报(自然科学版), 2007, 35(2): 6–12. doi: 10.3321/j.issn:1000-565X.2007.02.002 YAO X H, HAN Q, ZHAO L M, et al. Investigation into arc windshield of aircraft subjected to bird impact [J]. Journal of South China University of Technology (Natural Science Edition), 2007, 35(2): 6–12. doi: 10.3321/j.issn:1000-565X.2007.02.002
[9]	邹学韬, 张晓晴, 姚小虎. 压剪载荷作用下TB6钛合金的动态力学性能 [J]. 高压物理学报, 2019, 33(2): 024206. doi: 10.11858/gywlxb.20190713 ZOU X T, ZHANG X Q, YAO X H. Dynamic behavior of TB6 titanium alloy under shear-compression loading [J]. Chinese Journal of High Pressure Physics, 2019, 33(2): 024206. doi: 10.11858/gywlxb.20190713
[10]	惠旭龙, 牟让科, 白春玉, 等. TC4钛合金动态力学性能及本构模型研究 [J]. 振动与冲击, 2016, 35(22): 161–168. doi: 10.13465/j.cnki.jvs.2016.22.024 HUI X L, MU R K, BAI C Y, et al. Dynamic mechanical property and constitutive model for TC4 titanium alloy [J]. Journal of Vibration and Shock, 2016, 35(22): 161–168. doi: 10.13465/j.cnki.jvs.2016.22.024
[11]	KAY G. Failure modeling of titanium 6Al-4V and aluminum 2024-T3 with the Johnson-Cook material model: DOT/FAA/AR-03/57 [R]. Washington: U.S. Department of Transportation, Federal Aviation Administration, 2003: 1–11.

施引文献

资源附件(0)

访问统计

点击查看大图

图(13) / 表(3)

计量

文章访问数: 8344
HTML全文浏览量: 2997
PDF下载量: 40

Density/（kg·m⁻³）	Elastic modulus/GPa	Poisson’s ratio	Yield stress/MPa	Failure strain	Tangent modulus/MPa
928	0.068	0.49	0.69	1.25	5

ρ/(g·cm⁻³)	μ	T_m/K	A/MPa	B/MPa	n	C	m
4.430	0.33	1 878	1060	1090	0.884	0.0117	1.1

E/GPa	${\dot \varepsilon _{{0}}}$/s⁻¹	D₁	D₂	D₃	D₄	D₅
135	4 × 10⁻⁴	−0.090	0.270	0.480	0.014	3.870

Velocity/(m·s⁻¹)	Method	Maximum displacement/mm
Velocity/(m·s⁻¹)	Method	S₁	S₂	S₃	S₄	S₅	S₆
149	Sim.	65	51	36	64	55	23
149	Exp.	68	60	38	63	53	25
167	Sim.	75	60	48	76	65	27
167	Exp.	80	59	47	76	63	24
180	Sim.	119	101	63	118	103	54
180	Exp.	117	90	53	103	95	50

鸟撞冲击下TC4钛合金平板的变形和破坏

doi: 10.11858/gywlxb.20200515

作者简介: 贾 林（1988－），男，硕士，工程师，主要从事发动机强度试验技术研究. E-mail：jialin20060598@126.com

通讯作者: 姚小虎（1974－），男，博士，教授，主要从事爆炸与冲击动力学研究. E-mail：yaoxh@scut.edu.cn

计量

出版历程

Deformation and Destruction of TC4 Titanium Alloy Plate under the Bird Impact

计量

出版历程

目录

作者简介:
贾　林（1988－），男，硕士，工程师，主要从事发动机强度试验技术研究. E-mail：jialin20060598@126.com

通讯作者:
姚小虎（1974－），男，博士，教授，主要从事爆炸与冲击动力学研究. E-mail：yaoxh@scut.edu.cn