五羰基铁气相爆轰法合成纳米碳胶囊

李雪琪; 李晓杰; 闫鸿浩; 王小红; 潘训岑

doi:10.11858/gywlxb.20180562

五羰基铁气相爆轰法合成纳米碳胶囊

doi: 10.11858/gywlxb.20180562

大连理工大学工程力学系, 辽宁大连 116024

基金项目:

国家自然科学基金 11272081

国家自然科学基金 11672067

国家自然科学基金 11672068

详细信息

作者简介:
李雪琪(1992-), 女, 博士研究生, 主要从事爆轰法合成纳米材料研究. E-mail:348379150@qq.com

通讯作者:
李晓杰(1963-), 男, 博士, 教授, 主要从事爆轰及其效应研究. E-mail:Lixq@mail.dlut.edu.cn

中图分类号: O389
计量
- 文章访问数: 8331
- HTML全文浏览量: 2733
- PDF下载量: 23
出版历程
- 收稿日期: 2018-05-14
- 修回日期: 2018-06-08

Synthesis of Nanocarbon Capsules by Vapor Detonation of Pentacarbonyl Iron

Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China

摘要

摘要: 采用气相爆轰法，以乙炔气体、氧气和五羰基铁为原料成功地合成了比表面积为253.857 m²/g的胶囊状碳纳米材料。对反应的前置实验九羰基二铁的热分解反应的研究表明，在60~140℃之间，九羰基二铁热分解为五羰基铁和十二羰基三铁。对爆轰产物进行了XRD、TEM和BET物理吸附实验，结果表明：产物XRD图谱石墨峰明显，产物主要为具有石墨化倾向的薄层胶囊状无定形碳结构；实验产物比表面积为253.857 m²/g，孔体积为0.940 cm³/g，平均孔径为2.731 nm；吸附-脱附曲线回滞环类型为H3型，孔结构主要为颗粒堆积而形成的狭缝孔；爆轰产物比表面积较大，具有较强的吸附能力。证实了同样采用铁作为触媒，乙炔在不添加惰性气体作为缓冲剂的情况下，由于爆速过高而无法用于合成碳纳米管。
- 气相爆轰合成 /
- 纳米材料 /
- 胶囊状碳 /
- 比表面积
Abstract: In this study, the capsular carbon nanomaterials with large specific surface area are synthesized using gas phase detonation method doped with acetylene gas, oxygen and pentacarbonyl iron.The pre-experimental of the reaction for the thermal decomposition reaction of carbonyldiiron showed that the iron octacarbonyl diketones were thermally decomposed according to nine carbonyldiiron decomposed into iron pentacarbonyl and tricarbonyl dodecylcarbonyl between 60 and 140℃.The morphology and components of the synthesized nanoparticles were characterized through X-ray diffraction studies, transmission electron microscopy and physical adsorption instrument analyses.Results showed that the graphite peaks can be clearly observed in XRD pattern and the product is mainly with a structure that capsular amorphous carbon with thin layer which has graphitization tendency.The experimental product has a specific surface area of 253.857 m²/g, a pore volume of 0.940 cm³/g and an average pore size of 2.731 nm, type of the hysteresis loop of the adsorption & desorption curve is H3.The pore structure is mainly formed by the accumulation of granules and has a large specific surface area and a strong adsorption capacity.The article confirms that iron is also used as a catalyst.Acetylene cannot be used to synthesize carbon nanotubes without adding an inert gas as a buffering agent due to its high detonation velocity.
- gaseous detonation synthesis /
- nanomaterials /
- capsular carbon /
- specific surface area

HTML全文

图 1 气相爆轰管的示意图

Figure 1. Schematic of gaseous detonation tube

1.Heating system; 2.Explosion gas; 3.Oil inlet; 4.Sealed flange; 5.Filling port; 6.Oil outlet; 7.Vacuometer; 8.Intake valve; 9.Vacuum valve; 10.Main valve; 11.Ignition plug; 12.Reactor of iron pentacarbonyl

下载: 全尺寸图片幻灯片

图 2 爆轰产物的XRD图谱

Figure 2. XRD spectrums of detonation products

下载: 全尺寸图片幻灯片

图 3 爆轰产物的TEM图像

Figure 3. TEM images of detonation products

下载: 全尺寸图片幻灯片

图 4 产物吸附-脱附等温线和其相应的孔径分布图

Figure 4. Adsorption-desorption isotherms of product and their corresponding pore size distributions

下载: 全尺寸图片幻灯片

表 1 实验的主要参数

Table 1. Major experimental parameters

Experiment No.	Initial temperature/K	n(C₂H₂):n(O₂)	Partial pressure of acetylene/kPa	Partial pressure of oxygen/kPa	Mass of Fe₂(CO)₉/g
1	400	4:1	40	10	0.5
2	400	3:1	45	15	0.5
3	400	2:1	40	20	0.5
4	400	3:1	60	20	0.5

下载: 导出CSV

表 2 九羰基二铁分解实验参数

Table 2. Various parameters in the experiment of nonacarbonyldiiron decomposition

Experiment No.	Mass of Fe₂(CO)₉/g	Initial reading/kPa	Final reading/kPa	Pressure change Δp₀/kPa
1	2	2.00	4.11	2.11
2	4	2.00	6.29	4.29
3	8	2.00	10.52	8.52
4	12	2.00	14.44	12.44

下载: 导出CSV

表 3 实验爆轰参数

Table 3. Detonation parameters of experiments

Experiment No.	Q_e/(kJ·g^-1)	D/(m·s^-1)	p_J/MPa	T/K
1	10.3	2 751.33	1.43	4 295.47
2	10.6	2 799.19	1.79	4 498.55
3	11.2	2 874.60	1.92	4 815.61
4	10.6	2 799.19	2.39	4 498.55

下载: 导出CSV

参考文献(26)

[1]	CAO G, WANG Y.Nanostructures and nanomaterials[M].Seattle, WA:World Scientific Publishing, 2015.
[2]	WU G.Raman spectroscopy-the information in the peak strength[M].Beijing:Science Press, 2013.
[3]	LI X, LI X, WANG X, et al.Characterization of carbon-encapsulated permalloy nanoparticles prepared through detonation[J].Materials Research Express, 2017, 4(7):075024. doi: 10.1088/2053-1591/aa772f
[4]	PRAMANIK A, BISWAS S, KOLE A K, et al.Template-free hydrothermal synthesis of amphibious fluorescent carbon nanorice towards anti-counterfeiting applications and unleashing its nonlinear optical properties[J].RSC Advances, 2016, 6(101):99060-99071. doi: 10.1039/C6RA20442B
[5]	TIWARY C S, MUDAKAVI R J, KISHORE S, et al.Magnetic iron nanoparticles for in vivo targeted delivery and as biocompatible contrast agents[J].RSC Advances, 2016, 6(115):114344-114352. doi: 10.1039/C6RA14817D
[6]	PRAMANIK A, KOLE A K, KRISHNARAJ R N, et al.A novel technique of synthesis of highly fluorescent carbon nanoparticles from broth constituent and in-vivo bioimaging of C.elegans[J].Journal of Fluorescence, 2016, 26(5):1541-1548. doi: 10.1007/s10895-016-1854-8
[7]	SUVARNAPHAET P, TIWARY C S, WETCHARUNGSRI J, et al.Blue photoluminescent carbon nanodots from limeade[J].Materials Science and Engineering C, 2016, 69(1):914-921. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=83ffc2f246bd2e0046ae02db11b80dd8
[8]	闫鸿浩, 吴林松, 李晓杰, 等.颗粒长大模型在气相爆轰合成纳米材料中的应用[J].稀有金属材料与工程, 2015, 44(5):1144-1148. http://cdmd.cnki.com.cn/Article/CDMD-10141-1017245425.htm YAN H H, WU L S, LI X J, et al.Application of particles growth model in gaseous detonation of SnO₂ nanoparticles[J].Rare Metal Materials and Engineering, 2015, 44(5):1144-1148. http://cdmd.cnki.com.cn/Article/CDMD-10141-1017245425.htm
[9]	吴林松.气相爆轰法制备TiO₂基纳米光催化材料的研究[D].大连: 大连理工大学, 2017. WU L S.Study on TiO₂-based nano photocatalysts prepared by gaseous detonation method[D].Dalian: Dalian University of Technology, 2017.
[10]	杨瑞, 李晓杰, 闫鸿浩, 等.二茂铁质量对气相爆轰法合成碳纳米管的影响[J].高压物理学报, 2017, 31(4):389-395. http://www.gywlxb.cn/CN/abstract/abstract1974.shtml YANG R, LI X J, YAN H H, et al.Effect of ferrocene precursor mass on gaseous detonation synthesis of carbon nanotubes[J].Chinese Journal of High Pressure Physics, 2017, 31(4):389-395. http://www.gywlxb.cn/CN/abstract/abstract1974.shtml
[11]	欧阳欣.气相爆燃与爆轰法制备纳米二氧化钛颗粒研究[D].大连: 大连理工大学, 2009. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-AGLU201308001665.htm OUYANG X.Research on synthesis of titanium dioixde nanoparticles gas-phase deflagration and detonation method[D].Dalian: Dalian University of Technology, 2009. http://cpfd.cnki.com.cn/Article/CPFDTOTAL-AGLU201308001665.htm
[12]	王新星, 张宝林, 王行展, 等.雾化热分解一氧化五羰基铁制备磁性氧化铁纳米粒子[J].材料工程, 2014(8):51-54. http://d.wanfangdata.com.cn/Periodical/clgc201408010 WANG X X, ZHANG B L, WANG X Z, et al.Magnetic iron oxide nanoparticles prepared by spray pyrolysis-oxidation of iron pentacarbonyl[J].Journal of Materials Engineering, 2014(8):51-54. http://d.wanfangdata.com.cn/Periodical/clgc201408010
[13]	郭锴, 唐小恒, 周绪美.化学反应工程[M].北京:化学工业出版社, 2010. GUO Y, TANG X H, ZHOU X M.Chemical reaction engineering[M].Beijing:Chemical Industry Press, 2010.
[14]	周公度.化学辞典[M].北京:化学工业出版社, 2011. ZHOU G D.Chemical dictionary[M].Beijing:Chemical Industry Press, 2011.
[15]	徐士明.理想气体状态方程在计算炸药爆炸参数上的应用[J].沈阳工业学院学报, 1994, 13(3):55-61. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199400406081 XU S M.Application of ideal gas state equation in calculation of explosion parameters of explosives[J].Journal of Shenyang Institute of Technology, 1994, 13(3):55-61. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199400406081
[16]	杨瑞.气相爆轰(燃)法合成碳纳米管及纳米碳球的研究[D].大连: 大连理工大学, 2017. YANG R.Synthesis of carbon nanotubes and carbon nanospheres by gaseous detonation (burning) method[D].Dalian: Dalian University of Technology, 2017.
[17]	杨瑞, 李晓杰, 闫鸿浩, 等.初始温度及碳源对碳纳米管气相爆轰法合成的影响[J].强激光与粒子束, 2017, 29(2):56-60. http://d.old.wanfangdata.com.cn/Periodical/qjgylzs201702010 YANG R, Li X J, YAN H H, et al.Influence of initial temperature and carbon source on carbon nanotubes prepared by gaseous detonation[J].High Power Laser and Particle Beams, 2017, 29(2):56-60. http://d.old.wanfangdata.com.cn/Periodical/qjgylzs201702010
[18]	SONKAR S K, SAXENA M, SAHA M, et al.Carbon nanocubes and nanobricks from pyrolysis of rice[J].Journal of Nanoscience and Nanotechnology, 2010, 10(6):4064-4067. doi: 10.1166/jnn.2010.2007
[19]	赵铁军, 闫鸿浩, 李晓杰, 等.多壁碳纳米管的爆轰改性[J].高压物理学报, 2017, 31(4):403-408. http://www.gywlxb.cn/CN/abstract/abstract1976.shtml ZHAO T J, YAN H H, LI X J, et al.Detonation modification of multi-walled carbon nanotube[J].Chinese Journal of High Pressure Physics, 2017, 31(4):403-408. http://www.gywlxb.cn/CN/abstract/abstract1976.shtml
[20]	DECK C P, VECCHIO K.Prediction of carbon nanotube growth success by the analysis of carbon-catalyst binary phase diagrams[J].Carbon, 2006, 44(2):267-275. doi: 10.1016/j.carbon.2005.07.023
[21]	尹昊.碳基纳米材料的爆炸合成及其机理研究[D].北京: 北京理工大学, 2014. YIN H.Study on the explosive synthesis and mechanism of carbon-based nanomaterials[D].Beijing: Beijing Institute of Technology, 2014.
[22]	曲志明, 王育德.甲烷煤尘爆轰参数计算及实验研究[J].辽宁工程技术大学学报(自然科学版), 2013, 32(3):330-335. http://d.old.wanfangdata.com.cn/Periodical/lngcjsdxxb201303012 QU Z M, WANG Y D.Experimental study and numerical calculation of methane and coal dust detonation parameters[J].Journal of Liaoning Technical University (Natural Science), 2013, 32(3):330-335. http://d.old.wanfangdata.com.cn/Periodical/lngcjsdxxb201303012
[23]	曲志明, 王育德, 侯玮.甲烷浓度对甲烷燃烧爆炸特性影响的实验研究[J].煤炭工程, 2013(10):89-91. doi: 10.11799/ce201310030 QU Z M, WANG Y D, HOU W.Experiment study on methane concentration affected to combustion and explosion features of methane[J].Coal Engineering, 2013(10):89-91. doi: 10.11799/ce201310030
[24]	MOCHALIN V N, SHENDEROVA O, HO D, et al.The properties and applications of nanodiamonds[J].Nature Nanotechnology, 2011, 7(1):11-23. http://d.old.wanfangdata.com.cn/Conference/8706539
[25]	刘培生.多孔材料比表面积和孔隙形貌的测定方法[J].稀有金属材料与工程, 2006, 35(增刊2):25-29. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK200602349533 LIU P S.Method for measuring specific surface area and pore morphology of porous materials[J].Rare Metal Materials and Engineering, 2006, 35(Suppl 2):25-29. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK200602349533
[26]	ROUQUEROL J, ROUQUEROL F, LLEWELLYN P, et al.Adsorption by powders and porous solids:principles, methodology and applications[M].2nd ed.New York:Academic Press, 2012.