填充介质圆柱壳在侧向爆炸冲击作用下的变形型面研究

李翔宇; 王马法; 董文朴; 梁民族

doi:10.11858/gywlxb.2015.04.010

填充介质圆柱壳在侧向爆炸冲击作用下的变形型面研究

doi: 10.11858/gywlxb.2015.04.010

李翔宇^{1, 2, 3,},
王马法¹,
董文朴¹,
梁民族¹

1.
国防科技大学理学院，湖南长沙 410073
2.
南洋理工大学机械和航空航天工程学院，新加坡 639798
3.
北京理工大学爆炸科学与技术国家重点实验室，北京 100081

基金项目: 国家自然科学基金(11202237，11132012);爆炸科学与技术国家重点实验室开放基金(KFJJ12-16M)

详细信息

作者简介:
李翔宇(1980—)，男，博士，副教授，主要从事高效毁伤技术及其应用方面的研究. E-mail: xiangyu_lee@163.com

中图分类号: O344.3
计量
- 文章访问数: 6216
- HTML全文浏览量: 2359
- PDF下载量: 198
出版历程
- 收稿日期: 2013-02-16
- 修回日期: 2013-05-21

Investigation on the Deformation Shapes of Cylindrical Shell Filled with Soil under Lateral Explosion Loading

1.
College of Science, National University of Defense Technology, Changsha 410073, China
2.
School of Mechanical and Aerospace Engineering, NanyangTechnological University, Singapore 639798, Singapore
3.
State Key Laboratory of Explosion Science and Technology, Beijing institute of Technology, Beijing 100081, China

摘要

摘要: 对填充介质圆柱壳在侧向爆炸冲击作用下的变形型面进行了实验研究，获得了圆柱壳的最终变形型面。基于刚塑性动力学中的塑性铰理论建立了相应的分析模型，将圆柱壳划分为多个首尾相连的刚性方杆，利用方杆的平动、转动描述圆柱壳的变形过程，详细推导了相邻方杆间弹簧力、弯矩和偏折角等的表达式，考察了侧向炸药覆盖宽度和圆柱壳初始速度等因素对变形型面的影响。研究结果表明：所建立的分析模型能够有效地预测圆柱壳的变形型面，侧向炸药覆盖宽度和爆轰威力是影响圆柱壳最终变形型面的关键因素，可通过调整侧向炸药的覆盖宽度和圆柱壳初始速度实现不同的圆柱壳变形型面。
- 圆柱壳 /
- 塑性铰 /
- 侧向爆炸冲击 /
- 变形型面
Abstract: This paper presents brief results of an experimental investigation on deformation shapes of cylindrical shell filled with soil subjected to lateral explosion loading, and the ultimate deformation shapes are obtained.Based on the experimental results, a corresponding analytical model is undertaken by using the plastic hinge theory.In the analytical model, the cylindrical shell is divided into several end-to-end rigid square bars.The deformation shape of cylindrical shell is described by the translation and rotation process of rigid square bars.The expressions of the spring force, moment and deflection angle between adjacent bars are deduced theoretically in detail.In addition, the blast loading conditions are studied in terms of the covering width of outer layer explosive and the initial velocity of cylindrical shell.Theoretical and experimental results show a good agreement, thus the analytical model can be considered as a valuable tool in understanding the deformation mechanism and predicting the deformation shape of cylindrical shell under lateral contact explosion.The various deformation shapes of cylindrical shell can be achieved by modifying the covering width of outer layer explosive and initial velocity of cylindrical shell.
- cylindrical shell /
- plastic hinge /
- lateral explosion loading /
- deformation shape

HTML全文

图 1 实验装置图

Figure 1. Sketch of experimental setup

下载: 全尺寸图片幻灯片

图 2 圆柱壳变形型面实验结果

Figure 2. Experimental results of cylinder shape

下载: 全尺寸图片幻灯片

图 3 分析模型示意图

Figure 3. Sketch of the analytical model

下载: 全尺寸图片幻灯片

图 4 两方杆间的弹簧力示意图

Figure 4. Spring force between two square bars

下载: 全尺寸图片幻灯片

图 5 相邻方杆间的弯矩和偏折角

Figure 5. Moment and deflection angle between bars

下载: 全尺寸图片幻灯片

图 6 填充介质与方杆的作用

Figure 6. Interaction between filled explosion and bars

下载: 全尺寸图片幻灯片

图 7 圆柱壳在不同时刻的速度和位置分布图

Figure 7. Distributions of positions and velocities of cylindrical shells at various times

下载: 全尺寸图片幻灯片

图 8 覆盖宽度和初始速度对圆柱壳变形型面的影响

Figure 8. Deformation shapes of the cylindrical shell with different covering widths or different initial velocities

下载: 全尺寸图片幻灯片

参考文献(16)

[1]	Yakupov R G. Plastic strains in a cylindrical shell under the effect of a spherical blast wave[J]. Strength Mater, 1982, 14(1): 52-56. doi: 10.1007/BF00769184
[2]	Yakupov R G. Plastic deformations of a cylindrical shell under the action of a planar explosion wave[J]. J Appl Mech Tech Phys, 1982, 23(4): 579-584. http://www.springerlink.com/content/q7325856736255p7/
[3]	Jiang J, Olson M D. Nonlinear dynamic analysis of blast loaded cylindrical shell structures[J]. Comput Struct, 1991, 41(1): 41-52. doi: 10.1016/0045-7949(91)90154-E
[4]	Wierzbicki T, Hoo Fatt M S. Damage assessment of cylinders due to impact and explosive loading[J]. Int J Impact Eng, 1993, 13(2): 215-241. doi: 10.1016/0734-743X(93)90094-N
[5]	Li Q M, Jones N. Blast loading of a "short" cylindrical shell with transverse shear effects[J]. Int J Impact Eng, 1995, 16(2): 331-353. doi: 10.1016/0734-743X(94)00044-W
[6]	黄承义, 郑际嘉, 刘土光.圆柱壳在侧向非对称冲击载荷下的塑性动力屈曲[J].爆炸与冲击, 1995, 15(1): 82-90. http://www.cqvip.com/Main/Detail.aspx?id=1693952 Huang C Y, Zheng J J, Liu T G. Dynamic plastic bucking of cylindrical shells under non-uniform local radial impulsive loading[J]. Explosion and Shock Waves, 1995, 15(1): 82-90. (in Chinese) http://www.cqvip.com/Main/Detail.aspx?id=1693952
[7]	江松青, 李永池, 陈正翔.侧向不均匀冲击下环向加筋圆柱壳的动力响应[J].计算力学学报, 2001, 18(4): 443-448. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jslxxb200104011 Jiang S Q, Li Y C, Chen Z X. Dynamic response of ring-stiffened cylindrical shells under non-uniform lateral impact[J]. Chinese Journal of Computational Mechanics, 2001, 18(4): 443-448. (in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=jslxxb200104011
[8]	孙韬, 冯顺山.自由圆柱壳体在侧向非对称脉冲载荷下的塑性破坏[J].爆炸与冲击, 1998, 18(2): 104-110. http://www.cnki.com.cn/Article/CJFDTotal-BZCJ802.001.htm Sun T, Feng S S. Damage of free-free plastic cylinders under lateral impulsive loading[J]. Explosion and Shock Waves, 1998, 18(2): 104-110. (in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-BZCJ802.001.htm
[9]	龚柏林, 卢芳云, 李翔宇.可变形战斗部弹体变形型面的理论模型[J].爆炸与冲击, 2010, 30(1): 65-69. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bzycj201001012 Gong B L, Lu F Y, Li X Y. A theoretical model for forecasting deformation shapes of deformable warheads[J]. Explosion and Shock Waves, 2010, 30(1): 65-69. (in Chinese) http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bzycj201001012
[10]	Moussouros M, Hoo Fatt M S. Effect of shear on plastic denting of cylinders[J]. Int J Mech Sci, 1995, 37(4): 355-371. doi: 10.1016/0020-7403(94)00082-U
[11]	路国运, 雷建平.自由圆柱壳受冲击载荷作用下的动力响应仿真分析[J].太原理工大学学报, 2005, 36(6): 707-709. http://www.cnki.com.cn/article/cjfdtotal-tygy200506027.htm Lu G Y, Lei J P. Numerical simulation of the dynamic response of free-free cylindrical shell under lateral impact[J]. Journal of Taiyuan University of Technology, 2005, 36(6): 707-709. (in Chinese) http://www.cnki.com.cn/article/cjfdtotal-tygy200506027.htm
[12]	Gefken P R, Kirkpaptrick S W, Holmes B S. Response of impulsively loaded cylindrical shells[J]. Int J Impact Eng, 1998, 7(2): 213-227. http://www.sciencedirect.com/science/article/pii/0734743X88900279
[13]	Hung C F, Lin B J, Hwang-Fuu J J, et al. Dynamic response of cylindrical shell structures subjected to underwater explosion[J]. Ocean Eng, 2009, 36: 564-577. doi: 10.1016/j.oceaneng.2009.02.001
[14]	Li Z, Zhang S Y, Yang G T. The global deformation and local damage analysis of filled metallic cylindrical shells impact by missiles[J]. Acta Mechanica Solida Sinica, 1999, 20(4): 303-309. http://www.en.cnki.com.cn/Article_en/CJFDTOTAL-GTLB199903009.htm
[15]	Hoo Fatt M S, Wierzbicki T. Damage of plastic cylinders under localized pressure loading[J]. Int J Mech Sci, 1991, 33(2): 999-1016. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=CC0214851673
[16]	迈耶斯M A.材料的动力学行为[M].张庆明, 刘彦, 黄风雷, 等译.北京: 国防工业出版社, 2006. Meyers M A. Dynamic Behavior of Materials[M]. Translated by Zhang Q M, Liu Y, Huang F L, et al. Beijing: National Defense Industry Press, 2006. (in Chinese)