[1] |
Proskurovsky D I, Rotshtein V P, Ozur G E, et al. Pulsed electron-beam technology for surface modification of metallic materials[J]. J Vac Sci Technol A, 1998, 16(4): 2480-2488. doi: 10.1116/1.581369
|
[2] |
Proskurovsky D I, Rotshtein V P, Ozur G E, et al. Physical foundations for surface treatment of materials with low energy, high current electron beams[J]. Surf Coat Technol, 2000, 125(1/2/3): 49-56. http://www.sciencedirect.com/science/article/pii/S0257897299006040
|
[3] |
Zou J X, Zhang K M, Hao S Z, et al. Mechanisms of hardening, wear and corrosion improvement of 316 L stainless steel by low energy high current pulsed electron beam surface treatment[J]. Thin Solid Films, 2010, 519(4): 1404-1415. doi: 10.1016/j.tsf.2010.09.022
|
[4] |
李艳, 顾倩倩, 邱冬华, 等.强流脉冲电子束作用下纯镍表层中织构及结构缺陷的演化行为[J].高压物理学报, 2010, 24(6): 461-466. http://www.cqvip.com/QK/71135X/201107/37139325.htmlLi Y, Gu Q Q, Qiu D H, et al. Texture and structural defect evolution of pure nickel subjected to high-current pulse electron beam irradiation[J]. Chinese Journal of High Pressure Physics, 2010, 24(6): 461-466. (in Chinese) http://www.cqvip.com/QK/71135X/201107/37139325.html
|
[5] |
邱冬华, 程笃庆, 关庆丰, 等.强流脉冲电子束作用下纯镍表面的应力特征[J].高压物理学报, 2009, 23(5): 321-326. http://www.cqvip.com/QK/96553X/200905/31952403.htmlQiu D H, Cheng D Q, Guan Q F, et al. Surface stress characteristics in pure nickel after high current pulsed electron beam irradiation[J]. Chinese Journal of High Pressure Physics, 2009, 23(5): 321-326. (in Chinese) http://www.cqvip.com/QK/96553X/200905/31952403.html
|
[6] |
李艳, 蔡杰, 邹阳, 等.强流脉冲电子束作用下20钢的微观结构状态[J].高压物理学报, 2011, 25(3): 268-274. http://www.cnki.com.cn/Article/CJFDTotal-GYWL201103013.htmLi Y, Cai J, Zou Y, et al. The microstructures in 0.20%C carbon steel induced by high-current pulsed electron beam[J]. Chinese Journal of High Pressure Physics, 2011, 25(3): 268-274. (in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-GYWL201103013.htm
|
[7] |
Zhang K, Zou J, Grosdidier T, et al. Formation and evolution of craters in carbon steels during low-energy high-current pulsed electron-beam treatment[J]. J Vac Sci Technol A, 2009, 27(5): 1217-1226. doi: 10.1116/1.3207948
|
[8] |
蔡杰, 邹阳, 万明珍, 等. AISI 304L奥氏体不锈钢表面微孔结构的强流脉冲电子束快速制备与表征[J].高压物理学报, 2012, 26(6): 693-699. http://www.cnki.com.cn/Article/CJFDTotal-GYWL201206015.htmCai J, Zou Y, Wan M Z, et al. Rapid preparation and characterization of the surface microstructures of AISI 304L austenitic stainless steel by high-current pulsed electron beam[J]. Chinese Journal of High Pressure Physics, 2012, 26(6): 693-699. (in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-GYWL201206015.htm
|
[9] |
彭冬晋, 邹阳, 万明珍, 等.表面状态对强流脉冲电子束辐照诱发金属表面熔坑的影响[J].高压物理学报, 2013, 27(1): 99-104. http://qikan.cqvip.com/Qikan/Article/Detail?id=45079153Peng D J, Zou Y, Wan M Z, et al. Influence of surface state on the crater formation of metallic material surface irradiated by high current pulsed electron beam[J]. Chinese Journal of High Pressure Physics, 2013, 27(1): 99-104. (in Chinese) http://qikan.cqvip.com/Qikan/Article/Detail?id=45079153
|
[10] |
Zou J, Zhang K, Dong C, et al. Selective surface purification via crater eruption under pulsed electron beam irradiation[J]. Appl Phys Lett, 2006, 89(4): 041913. doi: 10.1063/1.2234306
|
[11] |
张可敏, 杨大智, 邹建新, 等. 316L不锈钢强流脉冲电子束表面改性研究: Ⅱ在模拟体液中的腐蚀行为[J].金属学报, 2007, 43(1): 71-76. http://www.oalib.com/paper/1612214Zhang K M, Yang D Z, Zou J X, et al. Surface modification of 316L stainless steel by high current pulsed electron beam: Part Ⅱ corrosion behaviors in the simulated body fluid[J]. Acta Metallurgica Sinica, 2007, 43(1): 71-76. (in Chinese) http://www.oalib.com/paper/1612214
|
[12] |
关庆丰, 邹阳, 张在强, 等.强流脉冲电子束作用下纯铜的微观结构与腐蚀性能[J].吉林大学学报(工学版), 2013, 43(4): 964-969. http://www.cqvip.com/QK/95788B/20134/46470716.htmlGuan Q F, Zou Y, Zhang Z Q, et al. Microstructures and corrosion property of pure copper under high-current pulsed electron beam irradiation[J]. Journal of Jilin University(Engineering and Technology Edition), 2013, 43(4): 964-969. (in Chinese) http://www.cqvip.com/QK/95788B/20134/46470716.html
|
[13] |
Qin Y, Dong C, Wang X, et al. Temperature profile and crater formation induced in high-current pulsed electron beam processing[J]. J Vac Sci Technol A, 2003, 21(6): 1934-1938. doi: 10.1116/1.1619417
|
[14] |
Shulov V A, Nochovnaya N A. Crater formation on the surface of metals and alloys during high power ion beam processing[J]. Nucl Instrum Meth B, 1999, 148: 154-158. http://www.sciencedirect.com/science/article/pii/S0168583X98008453
|
[15] |
Hansen N, Mehl R F, Medalist A. New discoveries in deformed metals[J]. Metall Mater Trans A, 2001, 32(12): 2917-2935. doi: 10.1007/s11661-001-0167-x
|
[16] |
张庆瑜, 董闯, 邹广田, 等.强流脉冲电子束辐照下单晶铝中的堆垛层错四面体[J].物理学报, 2008, 57(1): 392-397. http://d.wanfangdata.com.cn/Periodical/wlxb200801061Zhang Q Y, Dong C, Zou G T, et al. Stacking fault tetrahedra in single-crystal aluminum induced by high-current pulsed electron beam[J]. Acta Physica Sinica, 2008, 57(1): 392-397. (in Chinese) http://d.wanfangdata.com.cn/Periodical/wlxb200801061
|
[17] |
Guan Q F, Yang P L, Zou H, et al. Nanocrystalline and amorphous surface structure of 0.45%C steel produced by high current pulsed electron beam[J]. J Mater Sci, 2006, 41(2): 479-483. doi: 10.1007/s10853-005-2463-0
|
[18] |
Guan Q F, Zou H, Zou G T, et al. Surface nanostructure and amorphous state of a low carbon steel induced by high-current pulsed electron beam[J]. Surf Coat Technol, 2005, 196(1/2/3): 145-149. http://www.sciencedirect.com/science/article/pii/S0257897204007625
|