Perforation of Fully-Clamped Thick Metallic Plates Struck Normally by Conical-Nosed Projectiles
-
摘要: 研究了在不同速度的刚性锥头弹丸撞击下固支金属厚靶的侵彻和穿透性能。假定靶板的变形是局部化的,且冲击能量仅通过侵彻过程吸收,同时假定弹体在侵彻过程中表面所受靶体的平均压力是由基于空穴膨胀理论的靶体材料弹塑性变形所引起的静态阻力以及速度效应引起的动阻力两部分组成,认为侵彻过程中靶体对弹体的静阻力要进行自由表面效应修正,而且动阻力是瞬时侵彻速度的函数。获得了锥头弹丸在侵彻和贯穿过程中的弹道极限速度和残余速度的公式。将理论预测与实验结果进行比较,发现两者符合得很好。Abstract: Simple analytical equations are given to predict the perforation of fully-clamped thick metallic plates struck normally by rigid conical-nosed projectiles over a wide range of velocities based on the assumption that the deformation is localized and that the impact energy is dissipated only by penetration. It is further assumed that the mean pressure offered by the target materials to resist the projectiles consists of two parts: a quasi-static part due to the elastic-plastic deformation of the laminate materials and a dynamic part due to penetration velocity. Equations are obtained for the residual velocity and ballistic limit. It transpires that the present model predictions are in good agreement with available experimental data for thick metallic plates struck normally by conical-nosed projectiles.
-
Key words:
- conical-nosed projectiles /
- thick metallic plates /
- ballistic limit /
- perforation /
- residual velocity
-
Backman M E, Goldsmith W. The Mechanics of Penetration of Projectiles into Targets [J]. Int J Eng Sci, 1978, 16(1): 1-99. Corbett G G, Reid S R, Johnson W. Impact Loading of Plates and Shells by Free-Flying Projectiles: A Review [J]. Int J Impact Eng, 1996, 18(2): 141-230. Goldsmith W. Non-Ideal Projectile Impact on Targets [J]. Int J Impact Eng, 1999, 22(2-3): 95-395. Forrestal M J, Rosenberg Z, Luk V K, et al. Perforation of Aluminum Plates with Conical-Nosed Rods [J]. J Appl Mech, 1987, 54(1): 230-232. Borvik T, Langseth M, Hopperstad O S, et al. Ballistic Penetration of Steel Plates [J]. Int J Impact Eng, 1999, 22(9-10): 855-886. Woodward R L. The Interrelation of Failure Modes Observed in the Penetration of Metallic Targets [J]. Int J Impact Eng, 1984, 2(2): 121-129. Woodward R L, Cimpoeru S J. A Study of the Perforation of Aluminium Laminate Targets [J]. Int J Impact Eng, 1998, 21(3): 117-131. Dikshit S N, Kutumbarao V V, Sundararajan G. The Influence of Plate Hardness on the Ballistic Penetration of Thick Steel Plates [J]. Int J Impact Eng, 1995, 16(2): 293-320. Borvik T, Hopperstad O S, Berstad T, et al. Perforation of 12 mm Thick Steel Plates by 20 mm Diameter Projectiles with Flat, Hemispherical and Conical Noses, Part II: Numerical Simulations [J]. Int J Impact Eng, 2002, 27(1): 37-64. Borvik T, Clausen A H, Hopperstad O S, et al. Perforation of AA5083-H116 Aluminium Plates with Conical-Nose Steel Projectiles-Experimental Study [J]. Int J Impact Eng, 2004, 30(4): 367-384. Dey S, Borvik T, Hopperstad O S, et al. The Effect of Target Strength on the Perforation of Steel Plates Using Three Different Projectile Nose Shapes [J]. Int J Impact Eng, 2004, 30(8-9): 1005-1038. Hill R. The Mathematical Theory of Plasticity [M]. New York: Oxford University Press, 1950: 125-127. Forrestal M J, Luk V K, Brar N S. Perforation of Aluminum Armor Plates with Conical-Nose Projectiles [J]. Mech Mater, 1990, 10(1-2): 97-105. Warren T L. The Effect of Strain Rate on the Dynamic Expansion of Cylindrical Cavities [J]. J Appl Mech, 1999, 66(3): 818-821. Zhou H, Wen H M. Dynamic Cylindrical Cavity Expansion Model and Its Application to Penetration Problems [J]. Chinese Journal of High Pressure Physics, 2006, 20(1): 57-78. (in Chinese) 周辉, 文鹤鸣. 动态柱形空穴膨胀模型及其在侵彻问题中的应用 [J]. 高压物理学报, 2006, 20(1): 57-78. Warren T L, Hanchak S J, Poormon K L. Penetration of Limestone Targets by Ogive-Nosed VAR 4340 Steel Projectiles at Oblique Angles: Experiments and Simulations [J]. Int J Impact Eng, 2004, 30(10): 1307-1331. Wen H M. Predicting the Penetration and Perforation of FRP Laminates Struck Normally by Projectiles with Different Nose Shapes [J]. Compos Struct, 2000, 49(3): 321-329. Wen H M. Penetration and Perforation of Thick FRP Laminates [J]. Compos Sci Technol, 2001, 61(8): 1163-1172. Chen X W, Li Q M. Perforation of a Thick Plate by Rigid Projectiles [J]. Int J Impact Eng, 2003, 28(7): 743-759. He T, Wen H M, Qin Y. Finite Element Analysis to Predict Penetration and Perforation of Thick FRP Laminates Struck by Projectiles [J]. Int J Impact Eng, 2008, 35(1): 27-36. He T, Wen H M, Qin Y. Penetration and Perforation of FRP Laminates Struck Transversely by Conical-Nosed Projectiles [J]. Compos Struct, 2007, 81(2): 243-252. Ben-Dor G, Dubinsky A, Elperin T. Ballistic Impact: Recent Advances in Analytical Modeling of Plate Penetration Dynamics-A Review [J]. Appl Mech Rev, 2005, 58(6): 355-371. He T. A Study on the Penetration of Projectiles into Targets Made of Various Materials [D]. Hefei: University of Science and Technology of China, 2007. (in Chinese) 何涛. 动能弹在不同材料靶体中的侵彻行为研究 [D]. 合肥: 中国科学技术大学, 2007. Wen H M, Jones N. Low-Velocity Perforation of Punch-Impact-Loaded Metal Plates [J]. J Pressure Vessel Technol, 1996, 118(2): 181-187. Woodward R L. The Penetration of Metal Targets by Conical Projectiles [J]. Int J Mech Sci, 1978, 20(6): 349-359. Radin J, Goldsmith W. Normal Projectile Penetration and Perforation of Layered Targets [J]. Int J Impact Eng, 1988, 7(2): 229-259. Rosenberg Z, Forrestal M J. Perforation of Aluminum Plates with Conical-Nosed Rods-Additional Data and Discussion [J]. J Appl Mech, 1988, 55(1): 236-238.
点击查看大图
计量
- 文章访问数: 7739
- HTML全文浏览量: 390
- PDF下载量: 721