结构钢中绝热剪切带形成与扩展的光学观测与数值模拟

陈思颖 黄晨光 孔卫国 倪国强

陈思颖, 黄晨光, 孔卫国, 倪国强. 结构钢中绝热剪切带形成与扩展的光学观测与数值模拟[J]. 高压物理学报, 2010, 24(1): 31-36 . doi: 10.11858/gywlxb.2010.01.006
引用本文: 陈思颖, 黄晨光, 孔卫国, 倪国强. 结构钢中绝热剪切带形成与扩展的光学观测与数值模拟[J]. 高压物理学报, 2010, 24(1): 31-36 . doi: 10.11858/gywlxb.2010.01.006
CHEN Si-Ying, HUANG Chen-Guang, KONG Wei-Guo, NI Guo-Qiang. Optical Observation and Numerical Simulation on the Evolution of Adiabatic Shear Band in Structural Steel[J]. Chinese Journal of High Pressure Physics, 2010, 24(1): 31-36 . doi: 10.11858/gywlxb.2010.01.006
Citation: CHEN Si-Ying, HUANG Chen-Guang, KONG Wei-Guo, NI Guo-Qiang. Optical Observation and Numerical Simulation on the Evolution of Adiabatic Shear Band in Structural Steel[J]. Chinese Journal of High Pressure Physics, 2010, 24(1): 31-36 . doi: 10.11858/gywlxb.2010.01.006

结构钢中绝热剪切带形成与扩展的光学观测与数值模拟

doi: 10.11858/gywlxb.2010.01.006
详细信息
    通讯作者:

    陈思颖

Optical Observation and Numerical Simulation on the Evolution of Adiabatic Shear Band in Structural Steel

Funds: null
More Information
    Corresponding author: CHEN Si-Ying
  • 摘要: 绝热剪切带(Adiabatic Shear Band,ASB)是许多金属材料在冲击载荷作用下发生破坏的主要原因之一,它是近年来冲击动力学和损伤力学研究的前沿和热点。相关的理论研究主要针对一维剪切条件,分析应力、应变、剪切速度、材料热物理和力学性能、初始缺陷大小之间的关系,得到一个由多个物理量组合而成的量来判别材料出现剪切带的难易。ASB的实验主要利用Hopkinson压杆、扭杆、压剪炮等加载技术,研究钛合金、钨合金、高强结构钢等材料的剪切带特征,包括局部温度和变形分布、剪切带出现的阈值等。但是,对剪切带演化过程的在位观察及其动态实时演化的研究还较少见,妨碍了人们对由于剪切局部化而导致的材料破坏机理的深入认识。针对45钢,在Hopkinson压杆上,开展了不同冲击加载条件下剪切带演化过程的在位观察及可视化研究。利用自行设计的高分辨力的光学观测系统和基于数字相关理论的图像处理软件,捕捉了单一试样在冲击加载条件下ASB逐渐形成和扩展的过程。同时,利用LS-DYNA商业程序对试样的冲击压缩过程进行了数值模拟,所得主要结果与实验观测基本一致。

     

  • Magness L S. Improving Mechanical Properties of Tungsten Heavy Alloy Composites through Thermo Mechanical Processing [A]//Proc First Int Conf on Tungsten and Tungsten Alloys [C]. Arlington: Metal Powder Industries Federation, 1992: 127-132.
    Culver R S. Metall Effects at High Strain Rates [M]. New York: Plenum, 1973: 519-575.
    Xu T P, Wang L L. The Thermo-Viscoplasticity and Adiabatic Shear Deformation for a Titanium Alloy Ti-6Al-4V under High Strain Rates [J]. Explosion and Shock Waves, 1987, 7(1): 1-7. (in Chinese)
    徐天平, 王礼立, 卢维娴. 高应变速率下钛合金Ti-6Al-4V的热粘塑性特性和绝热剪切变形 [J]. 爆炸与冲击, 1987, 7(1): 1-7.
    Bao H S, Wang L L, Lu W X. The High Velocity Deformation and Adiabatic Shearing of a Titanium Alloy at Low Temperature [J]. Explosion and Shock Waves, 1989, 9(2): 109-119. (in Chinese)
    包合胜, 王礼立, 卢维娴. 钛合金在低温下的高速变形特性和绝热剪切 [J]. 爆炸与冲击, 1989, 9(2): 109-119.
    Cilfton R J. Adiabatic Shear Banding [A]//Materials Responses to Ultra-High Loading Rates [C]. Washington: National Academy of Sciences, 1980.
    Bai Y L. Thermo-Plastic Instability in Simple Shear [J]. J Mech Phys Solids, 1982, 30: 195-207.
    Kuriyama S, Meyers M A. Numerical Modeling of the Propagation of an Adiabatic Shear Band [J]. Metallurgical Trans A, 1986, 17A: 443-449.
    Lebouvier A S, Lipinski P. Numerical Study of the Propagation of an Adiabatic Shear Band [J]. J Phys Ⅳ France, 2000, 10: 403-408.
    Jin G C. Computer-Aided Optical Metrology [M]. Beijing: Tsinghua University Press, 1997.
  • 加载中
计量
  • 文章访问数:  7575
  • HTML全文浏览量:  399
  • PDF下载量:  440
出版历程
  • 收稿日期:  2009-04-20
  • 修回日期:  2009-08-26
  • 发布日期:  2010-02-15

目录

    /

    返回文章
    返回