临界条件下爆炸焊接的复板速度

王治平; 何智; 付明林; 刘曙

doi:10.11858/gywlxb.1996.02.007

临界条件下爆炸焊接的复板速度

doi: 10.11858/gywlxb.1996.02.007

中国工程物理研究院流体物理研究所; 冲击波物理与爆轰物理实验室

详细信息

通讯作者:
王治平

计量
- 文章访问数: 6978
- HTML全文浏览量: 427
- PDF下载量: 660
出版历程
- 收稿日期: 1996-01-25
- 修回日期: 1996-03-28
- 发布日期: 1996-06-05

The Flyer Plate Velocity in Explosive Welding under the Critical Conditions

Laboratory for Shock Wave and Detonation Physics Research, Southwest Institude of Fluid Physics, Chengdu 610003, China

More Information

Corresponding author: WANG Zhi-Ping

摘要

摘要: 通过参数分析，发现在爆炸焊接的临界条件下，复板与基板的临界碰撞速度主要取决于复板材料本身的性质，而与所选用的炸药及其爆轰参数关系不大，并通过并圆柱实验对这一结论做了初步验证。
- 爆炸焊接 /
- 半圆柱实验
Abstract: By analyzing the parameters, it is found that the critical velocity of flyer plate impacting with the parent plate depends principally on the properties of flyer plate and almost has nothing to do with the explosives and its detonation parameters under critical conditions. The results were tentatively proved by the semi-cylindrical tests.
- explosive welding /
- semi-cylindrical tests

HTML全文

参考文献(5)

Walsh J M, Shreffler R G, Willing F J. J Appl Phys, 1953, 24(3): 349-359.

Deribas A A, Simonov V A, Zakcharenko T D. Investigation of explosive welding parameters for arbitrary combination of metal and alloys. In: Proc 5th High Energy Rate Fabrication Conf, Denver, 1975.

吴英培. 金属材料学. 北京: 国防工业出版社, 1981.

Wang Zhiping, Gong Xinggen, Ouyang Denghuan, et al. The end effects of explosive cladding with thick flyer plate. In: Zhang Guanren, Huang Shihui, eds. Proc. 2nd Int. Symp. on Intense Dynamic Loading and Its Effects. Chengdu: Sichuan University Press, 1992: 828-832.

Crossland B, Cave J A. The explosive properties of ammonium nitrate/fuel oil mixtures. In: Proc. 5th High Energy Rate Fabrication Conf, Denver, 1975.

施引文献

资源附件(0)

访问统计