-
摘要: 六面顶和两面顶高压装置都采用圆片状触媒。在同腔体的情况下,后者的单次产量比前者约高50%。介绍了触媒的表面性质和合成件加载过程的外力与变形的关系,并对触媒形状的变化关系与比表面问题作了评述。指出,增加石墨和触媒接触的比表面或反应面积,对于提高细颗粒单晶金刚石的转化率是一条重要途径。为此,提出一种新形状触媒泡沫触媒的构想。Abstract: The circular sheet catalyst has been found useful for both six anvil and two anvil high pressure devices. But the single-output of the latter is about 50% higher than the former for the same chamber dimentions. In this paper, we analyzed the catalyst's surface characteristic and the relationship between the applied load and the strain of the catalyst assembly evaluated the function in the variation of the specific surface area as well as the shape of the catalyst. We conclude that the increase in contact area, or reaction area, between the catalyst and graphite is important for the enhancement of convention ratio of single-crystal fine diamond. To this end, the new concept of foam catalyst has been presented.
-
Key words:
- specific surface area /
- synthetic diamond /
- catalyst foam /
- electroless plating
-
DD-0268885, 1989. 东北工学院钢铁压力加工教研组编. 金属压力加工原理. 沈阳: 东北工学院, 1961: 16-63.
点击查看大图
计量
- 文章访问数: 7913
- HTML全文浏览量: 311
- PDF下载量: 909