[1] 卢芳云, 蒋邦海, 李翔宇, 等. 武器战斗部投射与毁伤 [M]. 北京: 科学出版社, 2013: 209.

LU F Y, JIANG B H, LI X Y, et al. Weapon warhead transmission and damage [M]. Beijing: Science Press, 2013: 209.
[2] 陈斌, 于起峰, 杨跃能, 等. 30 mm半穿甲弹斜侵彻陶瓷/钢复合装甲的弹着角效应研究 [J]. 国防科技大学学报, 2009, 31(6): 139–143. doi: 10.3969/j.issn.1001-2486.2009.06.026

CHEN B, YU Q F, YANG Y N, et a1. Effect of impact angle of 30 mm semi-AP projectile obliquely penetrating ceramic steel targets [J]. Journal of National Unversity of Defense Technology, 2009, 31(6): 139–143. doi: 10.3969/j.issn.1001-2486.2009.06.026
[3] 朱锡, 侯海量. 防半穿甲导弹战斗部动能穿甲模拟试验研究 [J]. 海军工程大学学报, 2002, 14(2): 13–19. doi: 10.3969/j.issn.1009-3486.2002.02.004

ZHU X, HOU H L. The simulative research on the kinetic armor-piercing effect of semi-armor-piercing missile warhead [J]. Journal of Naval University of Engineering, 2002, 14(2): 13–19. doi: 10.3969/j.issn.1009-3486.2002.02.004
[4] 楼建锋, 杭义洪. 弹头前舱对战斗部穿甲能力的影响 [C]// 第三届全国计算爆炸力学会议. 青岛: 中国力学学会爆炸力学专业委员会, 2006: 205–211.
[5] 陈刚. 半穿甲战斗部弹体穿甲效应数值模拟与实验研究 [D]. 绵阳: 中国工程物理研究院, 2006: 107–124.

CHEN G. Numerical and experimental envestigation on penetration effects of semi-armor-piercing warhead [D]. Mianyang: China Academy of Engineering Physics, 2006: 107–124.
[6] CHEN X W, YANG Y B, LU Z H, et al. Perforation of metallic plates struck by a blunt projectile with a soft nose [J]. International Journal of Impact Engineering, 2008, 35(6): 549–558. doi: 10.1016/j.ijimpeng.2007.05.002
[7] 徐钰巍, 黄风雷, 皮爱国, 等. 带前舱弹体斜撞击硬目标的姿态偏转 [J]. 北京理工大学学报, 2016, 36(10): 1011–1014.

XU Y W, HUANG F L, PI A G, et al. Attitude deflection of projectile with nose cabin under oblique impact on the hard target [J]. Transactions of Beijing Institute of Technology, 2016, 36(10): 1011–1014.
[8] ZHANG B Y, LIN Y F, LI S, et al. Quasi-static and high strain rates compressive behavior of aluminum matrix syntactic foams [J]. Composites Part B, 2016(98): 288–296.
[9] 高华, 熊超, 殷军辉. 多次冲击下泡沫铝动态压缩力学性能试验与本构模型研究 [J]. 兵工学报, 2018, 39(12): 124–133.

GAO H, XIONG C, YIN J H. Experimental and constitutive model on dynamic compressive mechanical properties of aluminum foams under repeated impacts [J]. Acta Armamentarii, 2018, 39(12): 124–133.
[10] 王耀琦. 多层泡沫铝填充胀环复合机构缓冲特性研究 [D]. 太原: 中北大学, 2018: 44–47.

WANG Y Q. Study on buffering characteristics of multi-layer foamed aluminum filled the expanded-rude compound structure [D]. Taiyuan: North University of China, 2018: 44–47.
[11] 李继承, 陈小伟, 陈刚.921A钢纯剪切帽状试件绝热剪切行为的数值模拟研究 [C]//第九届全国冲击动力学学术会议论文集(上册), 2009: 229–236.
[12] 屈明, 陈小伟, 陈刚. 细长薄壁弹体撞击钢靶屈曲的数值分析 [J]. 爆炸与冲击, 2008, 28(2): 116–223. doi: 10.3321/j.issn:1001-1455.2008.02.004

QU M, CHEN X W, CHEN G. Numerical study of dynamic plastic buckling of deep penetration projectile [J]. Explosive and Shock Waves, 2008, 28(2): 116–223. doi: 10.3321/j.issn:1001-1455.2008.02.004
[13] 徐伟, 侯海量, 朱锡, 等. 平头弹低速冲击下薄钢板的穿甲破坏机理研究 [J]. 兵工学报, 2018, 39(5): 883–892. doi: 10.3969/j.issn.1000-1093.2018.05.007

XU W, HOU H L, ZHU X, et al. Investigation on the damage mechanism of blunt projectile against thin plate [J]. Acta Armamentarii, 2018, 39(5): 883–892. doi: 10.3969/j.issn.1000-1093.2018.05.007
[14] 徐松林, 高汝明, 姚江涛. 国外海基反舰导弹战斗部研究进展 [J]. 战术导弹技术, 2012(5): 117–122.

XU S L, GAO R M, YAO J T. The development of foreign sea-based anti-ship missile’s warhead [J]. Tactical Missile Technology, 2012(5): 117–122.