[1] 徐松林, 阳世清, 李玉龙. 弹药与爆炸品的安全标准体系 [J]. 安全与环境工程, 2012, 19(5): 85–89 doi: 10.3969/j.issn.1671-1556.2012.05.021

XU S L, YANG S Q, LI Y L. Safety standard system of ammunitions and explosives [J]. Safety and Environmental Engineering, 2012, 19(5): 85–89 doi: 10.3969/j.issn.1671-1556.2012.05.021
[2] ROSENBERG Z, DEKEL E. Terminal ballistics [M]. Berlin: Springer, 2012.
[3] 陈卫东, 张忠, 刘家良. 破片对屏蔽炸药冲击起爆的数值模拟和分析 [J]. 兵工学报, 2009, 30(9): 1187–1191 doi: 10.3321/j.issn:1000-1093.2009.09.007

CHEN W D, ZHANG Z, LIU J L. Numerical simulation and analysis of shock initiation of shielded explosive impacted by fragments [J]. Acta Armamentarii, 2009, 30(9): 1187–1191 doi: 10.3321/j.issn:1000-1093.2009.09.007
[4] 童宗保, 王金相, 彭楚才, 等. 预制破片对屏蔽炸药冲击引爆研究 [J]. 科学技术与工程, 2014, 14(7): 173–177 doi: 10.3969/j.issn.1671-1815.2014.07.038

TONG Z B, WANG J X, PENG C C, et al. Study on the initiation of shielded explosive impacted by prefabricated fragment [J]. Science Technology and Engineering, 2014, 14(7): 173–177 doi: 10.3969/j.issn.1671-1815.2014.07.038
[5] 杨正才, 廖昕, 李晓刚, 等. 某隔板起爆器冲击起爆过程的数值模拟与实验研究 [J]. 含能材料, 2011, 19(2): 221–225 doi: 10.3969/j.issn.1006-9941.2011.02.022

YANG Z C, LIAO X, LI X G, et al. Numerical simulation and experimental investigation for shock initiation of bulkhead initiator [J]. Chinese Journal of Energetic Materials, 2011, 19(2): 221–225 doi: 10.3969/j.issn.1006-9941.2011.02.022
[6] 周杰, 何勇, 何源, 等. 含能毁伤元冲击引爆模拟战斗部试验研究 [J]. 含能材料, 2016, 24(11): 1048–1056 doi: 10.11943/j.issn.1006-9941.2016.11.003

ZHOU J, HE Y, HE Y, et al. Experimental study on shock initiation of simulative warhead by energetic kill element [J]. Chinese Journal of Energetic Materials, 2016, 24(11): 1048–1056 doi: 10.11943/j.issn.1006-9941.2016.11.003
[7] WALKER F E, WASLEY R J. Critical energy shock initiation of heteropterous explosive [C]//Explosive Pyrotechnics, 1968.
[8] LU J P, LI J, KENNEDY D L. Simulation of sympathetic reaction rests for PBXN-109 [C]//Proceedings of 13th Symposium (International) on Detonation. New York, USA, 2006: 1338–1349.
[9] 王晨, 伍俊英, 陈朗, 等. 壳装炸药殉爆实验和数值模拟 [J]. 爆炸与冲击, 2010, 30(2): 152–158 doi: 10.11883/1001-1455(2010)02-0152-07

WANG C, WU J Y, CHEN L, et al. Experiments and numerical simulations of sympathetic detonation of explosives in shell [J]. Explosion and Shock Waves, 2010, 30(2): 152–158 doi: 10.11883/1001-1455(2010)02-0152-07
[10] 时党勇, 李裕春, 张胜民. 基于ANSYS/LS-DYNA8.1进行显示动力分析 [M]. 北京: 清华大学出版社, 2005.
[11] 陈刚, 陈忠富, 陶俊林, 等. 45钢的Johnson-Cook失效模型 [C]//中国力学学会学术大会, 2005.
[12] 张磊. Q235钢拉伸性能的有限元仿真与试验 [D]. 长春: 吉林大学, 2012.
[13] 蒋国平. 非均质凝聚炸药二维冲击起爆实验与Lagrange分析研究 [D]. 长沙: 湖南大学, 2005.
[14] 北京工业学院八系. 爆炸及其作用(上) [M]. 北京: 国防工业出版社, 1982.