[1] 王海福, 刘宗伟, 俞为民, 等. 活性破片能量输出特性实验研究 [J]. 北京理工大学学报, 2009, 29(8): 663–666.

WANG H F, LIU Z W, YU W M, et al. Experimental investigation of energy release characteristics of reactive fragements [J]. Transactions of Beijing Institute of Technology, 2009, 29(8): 663–666.
[2] 黄亨建, 黄辉, 阳世清, 等. 毁伤增强型破片探索研究 [J]. 含能材料, 2007, 15(6): 566–569. doi: 10.3969/j.issn.1006-9941.2007.06.002

HUANG H J, HUANG H, YANG S Q, et al. Preliminary research on damage enhanced fragment [J]. Journal of Energetic Materials, 2007, 15(6): 566–569. doi: 10.3969/j.issn.1006-9941.2007.06.002
[3] 王海福, 郑元枫, 余庆波, 等. 活性破片引爆屏蔽装药机理研究 [J]. 北京理工大学学报, 2012, 32(8): 786–789. doi: 10.3969/j.issn.1001-0645.2012.08.004

WANG H F, ZHENG Y F, YU Q B, et al. Study on initiation mechanism of reactive fragment to covered explosive [J]. Transactions of Beijing Institute of Technology, 2012, 32(8): 786–789. doi: 10.3969/j.issn.1001-0645.2012.08.004
[4] 帅俊峰, 蒋建伟, 王树有, 等. 复合反应破片对钢靶侵彻的实验研究 [J]. 含能材料, 2009, 17(6): 722–725. doi: 10.3969/j.issn.1006-9941.2009.06.019

SHUAI J F, JIANG J W, WANG S Y, et al. Compound reactive fragment penetrating steel target [J]. Journal of Energetic Materials, 2009, 17(6): 722–725. doi: 10.3969/j.issn.1006-9941.2009.06.019
[5] 河源, 何勇, 潘绪超. 含能破片冲击薄板的释能时间 [J]. 火炸药学报, 2010, 33(2): 25–28. doi: 10.3969/j.issn.1007-7812.2010.02.007

HE Y, HE Y, PAN X C. Release time of energetic fragments impact thin target [J]. Chinese Journal of Explosives and Propellants, 2010, 33(2): 25–28. doi: 10.3969/j.issn.1007-7812.2010.02.007
[6] 徐松林, 阳世清, 徐文涛, 等. PTFE/AI反应材料的力学性能研究 [J]. 高压物理学报, 2009, 23(5): 384–388. doi: 10.11858/gywlxb.2009.05.010

XU S L, YANG S Q, XU W T, et al. Research on the mechanical performance of PTFE/Al reactive materials [J]. Chinese Journal of High Pressure Physics, 2009, 23(5): 384–388. doi: 10.11858/gywlxb.2009.05.010
[7] 阳世清, 徐松林, 张彤. PTFE/AI反应材料制备工艺及性能 [J]. 国防科技大学学报, 2008, 30(6): 39–42. doi: 10.3969/j.issn.1001-2486.2008.06.009

YANG S Q, XU S L, ZHANG T. Preparation and performance of PTEF/Al reactive materials [J]. Journal of National University of Defense Technology, 2008, 30(6): 39–42. doi: 10.3969/j.issn.1001-2486.2008.06.009
[8] RAFTENBERG M N, MOCK W, KIRBY G C. Modeling the impact deformation of rods of a pressed PTFE/Al composite mixture [J]. International Journal of Impact Engineering, 2008, 35(12): 1735–1744. doi: 10.1016/j.ijimpeng.2008.07.041
[9] CAI J, WALLEY S M, HUNT R J A, et al. High-strain, high-strain-rate flow and failure in PTFE/Al/W granular composites [J]. Materials Science & Engineering A, 2008, 472(1/2): 308–315.
[10] 陈鹏, 卢芳云, 覃金贵, 等. 含钨活性材料动态压缩力学性能 [J]. 兵工学报, 2015, 36(10): 1861–1866. doi: 10.3969/j.issn.1000-1093.2015.10.006

CHEN P, LU F Y, QIN J G, et al. Dynamic compressive mechanical properties of tungstenic reactive material [J]. Acta Armamentarii, 2015, 36(10): 1861–1866. doi: 10.3969/j.issn.1000-1093.2015.10.006
[11] DANIEL T C. Mechanical response of an Al-PTFE composite to uniaxial compression over a range of strain rates and temperatures [R]. U.S. Army Research Laboratory, 2008: 1–18.
[12] 卢芳云, 陈荣, 林玉亮, 等. 霍普金森杆实验技术 [M]. 北京: 科学出版社, 2013: 31–32.
[13] 陆明万, 罗学富. 弹性理论基础 [M]. 北京: 清华大学出版社, 1990.