[1] 金山, 汤铁钢, 孙学林, 等. 不同热处理条件下45钢柱壳的动态性能 [J]. 爆炸与冲击, 2006, 26(5): 423–428. doi: 10.3321/j.issn:1001-1455.2006.05.006

JIN S, TANG T G, SUN X L, et al. Dynamic characteristics of 45 steel cylinder shell by different heat treatment conditions [J]. Explosion and Shock Waves, 2006, 26(5): 423–428. doi: 10.3321/j.issn:1001-1455.2006.05.006
[2] DEMIR T, ÜBEYLI M, YILDIRIM R O. Effect of hardness on the ballistic impact behavior of high-strength steels against 7.62-mm armor piercing projectiles [J]. Journal of Materials Engineering and Performance, 2009, 18(2): 145–153. doi: 10.1007/s11665-008-9288-3
[3] DIKSHIT S N, KUTUMBARAO V V, SUNDARARAJAN G. The influence of plate hardness on the ballistic penetration of thick steel plates [J]. International Journal of Impact Engineering, 1995, 16(2): 293–320. doi: 10.1016/0734-743X(94)00041-T
[4] 吴广, 冯顺山, 董永香, 等. 不同硬度弹丸对中厚钢板作用的试验研究 [J]. 兵工学报, 2010, 31(1): 260–263.

WU G, FENG S S, DONG Y X, et al. Experimental study on penetration effects of projectiles with different hardnesses on target [J]. Acta Armamentarii, 2010, 31(1): 260–263.
[5] 陈小伟, 张方举, 梁斌, 等. A3钢钝头弹侵彻45钢板破坏模式的试验研究 [J]. 爆炸与冲击, 2006, 26(3): 199–207. doi: 10.3321/j.issn:1001-1455.2006.03.002

CHEN X W, ZHANG F J, LIANG B, et al. Three modes of penetration mechanics of A3 steel cylindrical projectiles impact onto 45 steel plates [J]. Explosion and Shock Waves, 2006, 26(3): 199–207. doi: 10.3321/j.issn:1001-1455.2006.03.002
[6] 徐豫新, 任杰, 王树山. 钨球正侵彻下低碳钢板的极限贯穿厚度研究 [J]. 北京理工大学学报, 2017, 37(6): 551–556.

XU Y X, REN J, WANG S S. Research on perforation limit thickness of low carbon steel plates impacted normally by tungsten spheres [J]. Transaction of Beijing Institute of Technology, 2017, 37(6): 551–556.
[7] 任杰, 徐豫新, 王树山. 超高强度平头圆柱形弹体对低碳合金钢板的高速撞击实验 [J]. 爆炸与冲击, 2017, 37(4): 629–636. doi: 10.11883/1001-1455(2017)04-0629-08

REN J, XU Y X, WANG S S. High velocity impact of low-carbon alloy steel plates by ultra-high strength blunt projectiles [J]. Explosion and Shock Waves, 2017, 37(4): 629–636. doi: 10.11883/1001-1455(2017)04-0629-08
[8] 赵丽俊, 焦志刚, 李晓婕, 等. 预制破片侵彻均质装甲钢的极限穿透速度 [J]. 爆炸与冲击, 2018, 38(1): 183–190. doi: 10.11883/bzycj-2016-0116

ZHAO L J, JIAO Z G, LI X J, et al. Critical penetration velocity of prefabricated fragment in penetrating homogeneous armor steel plate [J]. Explosion and Shock Waves, 2018, 38(1): 183–190. doi: 10.11883/bzycj-2016-0116
[9] 周楠, 王金相, 张亚宁, 等. 球形破片侵彻下钢/铝复合钢板的失效模式与吸能机理 [J]. 爆炸与冲击, 2018, 38(1): 66–75. doi: 10.11883/bzycj-2016-0131

ZHOU N, WANG J X, ZHANG Y N, et al. Failure mode and energy absorption mechanism of steel/aluminum composite plates impacted by spherical fragment [J]. Explosion and Shock Waves, 2018, 38(1): 66–75. doi: 10.11883/bzycj-2016-0131
[10] BACKMAN M E, GOLDSMITH W. The mechanics of penetration of projectiles into targets [J]. International Journal of Engineering Science, 1978, 16(1): 1–99. doi: 10.1016/0020-7225(78)90002-2
[11] 陈继恩. 基于应力三轴度的材料失效研究 [D]. 武汉: 华中科技大学, 2009: 23–34.

CHEN J E. Research of material failure basic on stress triaxiality [D]. Wuhan: Huazhong University of Science and Technology of China, 2009: 23–34.
[12] 谈庆明. 量纲分析 [M]. 合肥: 中国科学技术大学出版社, 2005: 9–18.

TAN Q M. Dimensional analysis [M]. Hefei: University of Science and Technology of China Press, 2005: 9–18.
[13] 毛亮, 王华, 姜春兰, 等. 钨合金球形破片侵彻陶瓷/DFRP复合靶的弹道极限速度 [J]. 振动与冲击, 2015, 34(13): 1–5.

MAO L, WANG H, JIANG C L, et al. Ballistic limit velocity of tungsten alloy spherical fragment penetrating ceramic/DFRP composite target plates [J]. Journal of Vibration and Shock, 2015, 34(13): 1–5.
[14] BANERJEE B. The mechanical threshold stress model for various tempers of AISI 4340 steel [J]. International Journal of Solids and Structures, 2005, 44(3): 834–859.