[1] MATHEWS W. Services test spray-on vehicle armor [N]. Army Times, 2004–05–03.
[2] 宋彬, 黄正祥, 翟文, 等. 聚脲弹性体夹芯防爆罐抗爆性能研究 [J]. 振动与冲击, 2016(7): 138–144

SONG B, HUANG Z X, ZHAI W, et al. Anti-detonation properties of explosion-proof pots made of sandwich structures with polyurea elastomer [J]. Journal of Vibration and Shock, 2016(7): 138–144
[3] 甘云丹, 宋力, 杨黎明. 弹性体涂覆钢板抗冲击性能的数值模拟 [J]. 兵工学报, 2016(S2): 15–18

GAN Y D, SONG L, YANG L M. Numerical simulation for anti-blast performances of steel plate coated with elastomer [J]. Acta Armamentarii, 2016(S2): 15–18
[4] BAHEI-EI-DIN Y A, DVORAK G J, FREDRICKSEN O J. A blast-tolerant sandwich plate design with a polyurea interlayer [J]. International Journal of Solids and Structures, 2006, 43(25/26): 7644–7658. doi: 10.1016/j.ijsolstr.2006.03.021
[5] AMINI M R, SIMON J, NEMAT-NASSER S. Numerical modeling of effect of polyurea on response of steel plates to impulsive loads in direct pressure-pulse experiments [J]. Mechanics of Materials, 2010, 42(6): 628–639. doi: 10.1016/j.mechmat.2009.09.008
[6] 赵鹏铎, 张鹏, 张磊, 等. 聚脲涂覆钢板结构抗爆性能试验研究 [J]. 北京理工大学学报, 2018, 38(2): 118–123

ZHAO P D, ZHANG P, ZHANG L, et al. Experimental investigation on the performance of polyurea-coated structure under blast loads [J]. Transactions of Beijing Institute of Technology, 2018, 38(2): 118–123
[7] TEKALUR S A, SHUKLA A, SHIVAKUMAR K. Blast resistance of polyurea based layered composite materials [J]. Composite Structures, 2008, 84(3): 271–281. doi: 10.1016/j.compstruct.2007.08.008
[8] LEBLANC J, SHUKLA A. Response of polyurea-coated flat composite plates to underwater explosive loading [J]. Journal of Composite Materials, 2015, 49(8): 965–980. doi: 10.1177/0021998314528263
[9] ACKLAND K, ANDERSON C, NGO T D. Deformation of polyurea-coated steel plates under localised blast loading [J]. International Journal of Impact Engineering, 2013, 51: 13–22. doi: 10.1016/j.ijimpeng.2012.08.005
[10] XUE L, MOCK W, BELYTSCHKO T. Penetration of DH-36 steel plates with and without polyurea coating [J]. Mechanics of Materials, 2010, 42(11): 981–1003. doi: 10.1016/j.mechmat.2010.08.004
[11] HALLQUIST J O. LS-DYNA keyword user’s manual [M]. Livermore Software Technology Corporation, 2007.
[12] LIU X R, TIAN X G, LU T J, et al. Blast resistance of sandwich-walled hollow cylinders with graded metallic foam cores [J]. Composite Structures, 2012, 94(8): 2485–2493. doi: 10.1016/j.compstruct.2012.02.029