[1] SCHEFFER D R, ZUKA J A. Practical aspects of numerical simulation of dynamic events material interfaces [J]. International Journal of Impact Engineering, 2000, 24(8): 821–842. doi: 10.1016/S0734-743X(00)00003-8
[2] ZUKA J A. Practical aspects of numerical simulations of dynamic events: effects of meshing [J]. International Journal of Impact Engineering, 2000, 24(9): 925–945. doi: 10.1016/S0734-743X(00)00012-9
[3] JOHNSON G R, COOK W H. A constitutive model and data for metals subjected to large strains, high strains rates and high temperature [C]//Proceedings of the Seventh International Symposium on Ballistics. Netherland, 1983.
[4] BØRVIK T, HOPPERSTAD O S, BERSTAD T, et al. A computational model of viscoplasticity and ductile damage for impact and penetration [J]. European Journal of Mechanics Solids, 2001, 20(5): 685–712. doi: 10.1016/S0997-7538(01)01157-3
[5] GUPTA N K, IQBAL M A. Experiment and numerical studies on the behavior of thin aluminum plates subjected to impact by blunt and hemispherical-nosed projectile [J]. International Journal of Impact Engineering, 2006, 32(12): 1921–1944. doi: 10.1016/j.ijimpeng.2005.06.007
[6] BØRVIK T, HOPPERSTAD O S. Numerical simulation of plugging failure in ballistic penetration [J]. International Journal of Solids and Structures, 2001, 38(25): 6241–6264.
[7] BAO Y B, WIERZBICKI T. On fracture locus in the equivalent strain and stress triaxiality space [J]. International Journal of Mechanical Sciences, 2004, 46(12): 81–98.
[8] GILIOLI A, WIERZBICKI T. Predicting ballistic impact failure of aluminium 6061-T6 with the rate-independent Bao-Wierzbicki fracture model [J]. International Journal of Impact Engineering, 2015, 76(15): 207–220.
[9] TENG X, WIERZBICKI T. Evaluation of six fracture models in high velocity perforation [J]. Engineering Fracture Mechanics, 2016, 73(12): 1653–1678.
[10] 陈刚. 半穿甲战斗部弹体穿甲效应数值模拟和实验研究[D]. 绵阳: 中国工程物理研究院, 2006.

CHEN G. Numerical and experimental investigation on penetration effects of semi-armor-piercing warhead [D]. Mianyang: China Academy of Engineering Physics, 2006.
[11] 姚熊亮, 徐小刚. 船用917钢抗冲击性能试验 [J]. 中国造船, 2004, 45(4): 35–41. doi: 10.3969/j.issn.1000-4882.2004.04.006

YAO X L, XU X G. The experiment research of steel 917 under impact load [J]. Ship Building of China, 2004, 45(4): 35–41. doi: 10.3969/j.issn.1000-4882.2004.04.006
[12] 李营. 液舱防爆炸破片侵彻作用机理研究 [D]. 武汉: 武汉理工大学, 2014.

LI Y. Study of anti-blast fragment penetration mechanism in liquid tank [D]. Wuhan: Wuhan University of Technology, 2014.
[13] 伍星星, 孟利平, 刘建湖, 等. 大质量战斗部穿甲数值仿真对材料断裂极限参数确定分析[C]//第十五届战斗部与毁伤会议集. 北京, 2017.

WU X X, MENG L P, LIU J H, et al. Parameter determination analysis of material fracture limit by numerical simulation armor piercing in mass warhead [C]//The 15th Warhead Damage Conference. Beijing, 2017.
[14] BØRVIK T, HOPPERSTAD O S. On the influence of stress triaxiality and strain rate on the behavior of a structural steel. Part II. numerical study [J]. European Journal of Mechanics A-Solids, 2003, 22(1): 15–32. doi: 10.1016/S0997-7538(02)00005-0
[15] 陈继恩. 基于应力三轴度的材料失效研究 [D]. 武汉: 华中科技大学, 2012.

CHEN J E. Research of material failure basic on stress triaxiality [D]. Wuhan: Huazhong University of Science and Technology, 2012.
[16] 孟利平. 应变率和应力三轴度对船用钢变形和断裂的影响研究 [D]. 无锡: 中国船舶科学研究中心, 2016.

MENG L P. Study on the influence of strain rate and stress triaxiality on deformation and fracture of marine steel [D]. Wuxi: China Ship Science Research Center, 2016.
[17] 谢凡, 张涛, 陈继恩, 等. 应力三轴度的有限元计算修正 [J]. 爆炸与冲击, 2012, 32(1): 8–14. doi: 10.3969/j.issn.1001-1455.2012.01.002

XIE F, ZHANG T, CHEN J E, et al. Updating of the stress triaxiality by finite element analysis [J]. Explosion and Shock Waves, 2012, 32(1): 8–14. doi: 10.3969/j.issn.1001-1455.2012.01.002
[18] 伍星星, 张伦平, 刘建湖, 等. 不同类型战斗部穿甲不同金属板试验与理论分析 [C]//第十五届战斗部与毁伤会议集. 北京, 2017.

WU X X, ZHANG L P, LIU J H, et al. Experimental and theory analysis on different nosed warhead penetrating different thickness metal [C]//The 15th Warhead Damage Conference. Beijing, 2017.