[1] Goods S H, Neuschwanger C L, Henderson C C, et al. Mechanical Properties of CRETE, a Polyurethane Foam [J]. J Appl Poly Sci, 1998, 68: 1045-1055.
[2] Jun Zh, Noboru K, Victor Li. Constitutive Modeling of Polymeric Foam Material Subjected to Dynamic Crush Loading [J]. Inter J Impact Eng, 1998, 21(5): 369-386.
[3] Hu Sh Sh, Liu J F, Wang W. Study on the Constitutive Relationship of Rigid Polyurethane Foam [J]. Acta Mechanica Sinica, 1998, 30(2): 151-156. (in Chinese)
[4] 胡时胜, 刘剑飞, 王悟. 硬质聚氨酯泡沫塑料本构关系的研究 [J]. 力学学报, 1998, 30(2): 151-156.
[5] Lu Z X, Zhu W M, Kou C H, et al. Investigation on the Fracture Properties of Polyurethane Rigid Foam Plastics [J]. Acta Mechanica Sinica, 2002, 32(5): 627-631. (in Chinese)
[6] 卢子兴, 朱汪鲲, 寇长河, 等. 聚氨酯泡沫塑料的强度与断裂韧性 [J]. 力学学报, 2002, 32(5): 627-631.
[7] Lu Z X, Xie R Z, Tian C J. Investigation into Shear Mechanical Properties of PUR Foamed Plastics [J]. J Beijing Univer Aero Astro, 1999, 25(5): 561-564. (in Chinese)
[8] 卢子兴, 谢若泽, 田常津. 聚氨酯泡沫塑料剪切力学性能的研究 [J]. 北京航空航天大学学报, 1999, 25(5): 561-564
[9] Chen W, Lu F, Zhou B. A Quartz-Crystal-Embedded Split Hopkinson Pressure Bar for Soft Materials [J]. Experimental Mechanics, 2000, 40(1): 1-56.
[10] Nemat-Nasser S, Isaacs J B, Starrett J E. Hopkinson Techniques for Dynamic Recovery Experiments [J]. Proceedings of the Royal Society of London, 1991, 435(A): 371-391.
[11] Frew D J, Forrestal M J, Chen W. Pulsing Shaping Techniques for Testing Brittle Materials with a Split Hopkinson Pressure Bar [J]. Experimental Mechanics, 2002, 42(1): 93-106.
[12] Sherwood J A, Forst C C. Constitutive Modeling and Simulation of Energy Absorbing Polyurethane Foam [J]. Poly Eng Sci, 1992, 32(16): 1138-1146.
[13] Chen W, Lu F, Winfree N. High-Strain-Rate Compression Behavior of a Rigid Polyurethane Foam with Various Densities [J]. Exp Mech, 2002, 42(1): 65-73.