[1] Xu J A, Huang E. Graphite-Diamond Transition in Gem Anvil Cells [J]. Rev Sci Instrum, 1994, 65(1): 204-207.
[2] Zhang B, Guo W L. Cracking Diamond Anvil Cells by Compressed Nanographite Sheets Near the Contact Edge [J]. Appl Phys Lett, 2005, 87: 051907.
[3] Jackson D D, Aracne-Ruddle C, Malba V, et al. Magnetic Susceptibility Measurements at High Pressure Using Designer Diamond Anvils [J]. Rev Sci Instrum, 2003, 74(4): 2467-2471.
[4] Wang Y B, Durham W B, Getting I C, et al. The Deformation-DIA: A New Apparatus for High Temperature Triaxial Deformation to Pressures up to 15 GPa [J]. Rev Sci Instrum, 2003, 74(6): 3002-3011.
[5] Zhao Y S, He D W, Jiang Q, et al. Development of High p-T Neutron Diffraction at LANSCE-Toroidal Anvil Press, TAP-98, in the HIPPO Diffractometer [A]//Chen J H, Wang Y B, Duffy T S, et al. Advances in High-Pressure Technology for Geophysical Applications [M]. Elsevier Science Technology Books, 2005: 461-474.
[6] Kanke Y, Akaishi M, Yamaoka S, et al. Heater Cell for Materials Synthesis and Crystal Growth in the Large Volume High Pressure Apparatus at 10 GPa [J]. Rev Sci Instrum, 2002, 73(59): 3268-3270.
[7] Cordier P, Rubie D C. Plastic Deformation of Minerals under Extreme Pressure Using a Multi-Anvil Apparatus [J]. Mater Sci Eng A, 2001(309-310): 38-43.
[8] Irifune T, Kurio A, Sakamoto S, et al. Ultrahard Polycrystalline Diamond from Graphite [J]. Nature, 2003, 421(6923): 599-600.
[9] Katsura T, Funakoshi K, Kubo A, et al. A Large-Volume High-Pressure and High-Temperature Apparatus for in Situ X-ray Observation, 'SPEED-Mk. II' [J]. Phys Earth Planet Interiors, 2004(143-144): 497-506.
[10] Wang F L, He D W, Fang L M, et al. Design and Assembly of Split-Sphere High Pressure Apparatus Based on the Hinge-Type Cubic-Anvil Press [J]. Acta Physica Sinica, 2008, 57(9): 5429-5434. (in Chinese)
[11] 王福龙, 贺端威, 房雷鸣, 等. 基于铰链式六面顶压机的二级6-8型大腔体静高压装置 [J]. 物理学报, 2008, 57(9): 5429-5434.
[12] He D W, Wang F L, Kou Z L, et al. A New Type Ultra-High Pressure Apparatus: China, 200710048839. 2 [P]. 2007-12-26. (in Chinese)
[13] 贺端威, 王福龙, 寇自力, 等. 用于产生超高压的新型装置: 中国, 200710048839. 2 [P]. 2007-12-26.
[14] Wang G Z, Zhai X Q, Luo M. The High Pressure and High Temperature Apparatus of the Hinge-Type Cubic-Anvil Press [J]. Diamond and Abrasive Tools Engineering, 2000, 120: 34-37. (in Chinese)
[15] 王光祖, 翟小青, 罗明. 铰链式六面砧高压高温装置 [J]. 金刚石与磨料磨具工程, 2000, 120: 34-37.
[16] Li J, Tan X. Study on Structure of Main Body of Large-Scale Cubic Press [J]. Mining and Metallurgical Engineering, 2006, 26(3): 61-64. (in Chinese)
[17] 李杰, 谭鑫. 大吨位六面顶压机主机结构的研究 [J]. 矿冶工程, 2006, 26(3): 61-64.
[18] Wang X C, Jia X P, Zhang T C, et al. cBN Synthesis in the System of hBN-Mg and Bonded Water [J]. Diamond and Related Materials, 2003, 12: 57-60.
[19] Ohtaka O, Ohnishi N, Kubo K, et al. High-Pressure and High-Temperature Generation Using Diamond/SiC Composite Anvils Prepared with Hot Isostatic Pressing [J]. High Pressure Research, 2005, 25(1): 11-16.
[20] Frost D J, Poe B T, Tronnes R G, et al. A New Large-Volume Multianvil System [J]. Phys Earth Planet Interiors, 2004(143-144): 507-514.
[21] Fang L M, He D W, Chen C, et al. Effect of Precompression on Pressure-Transmitting Efficiency of Pyrophyllite Gaskets [J]. High Pressure Research, 2007, 27(3): 367-374.
[22] Gou Q Q. The Transformation Mechanism of Graphite-Diamond Under the High Pressure and High Temperature [J]. Journal of Jilin University, 1974, (2): 52-63.
[23] 芶清泉. 高温高压下石墨变金刚石结构转化机理 [J]. 吉林大学学报, 1974, (2): 52-63.