[1] SHIM J, MOHR D. Using split Hopkinson pressure bars to perform large strain compression tests on polyurea at low, intermediate and high strain rates [J]. International Journal of Impact Engineering, 2009, 36(9): 1116–1127. doi: 10.1016/j.ijimpeng.2008.12.010
[2] SHIM J, MOHR D. Rate dependent finite strain constitutive model of polyurea [J]. International Journal of Plasticity, 2011, 27(6): 868–886. doi: 10.1016/j.ijplas.2010.10.001
[3] 黄微波.喷涂聚脲弹性体技术[M].北京: 化学工业出版社, 2005.
[4] ROLAND C M, FRAGIADAKIS D, GAMACHE R M. Elastomer–steel laminate armor [J]. Composite Structures, 2010, 92(5): 1059–1064. doi: 10.1016/j.compstruct.2009.09.057
[5] YI J, BOYCE M C, LEE G F, et al. Large deformation rate-dependent stress–strain behavior of polyurea and polyurethanes [J]. Polymer, 2006, 47(1): 319–329. doi: 10.1016/j.polymer.2005.10.107
[6] SARVA S S, DESCHANEL S, BOYCE M C, et al. Stress–strain behavior of a polyurea and a polyurethane from low to high strain rates [J]. Polymer, 2007, 48(8): 2208–2213. doi: 10.1016/j.polymer.2007.02.058
[7] PATHAK J A, TWIGG J N, NUGENT K E, et al. Structure evolution in a polyurea segmented block copolymer because of mechanical deformation [J]. Macromolecules, 2008, 41(20): 7543–7548. doi: 10.1021/ma8011009
[8] 甘云丹, 宋力, 杨黎明. 弹性体涂覆钢板抗冲击性能的数值模拟 [J]. 兵工学报, 2009, 30(2): 15–18

GAN Y D, SONG L, YANG L M. Numerical simulation for anti-blast performances of steel plate coated with elastomer [J]. Acta Armamentarii, 2009, 30(2): 15–18
[9] 宋彬, 黄正祥, 翟文, 等. 聚脲弹性体夹芯防爆罐抗爆性能研究 [J]. 振动与冲击, 2016, 35(7): 138–144

SONG B, HUANG Z X, ZHAI W, et al. Anti-detonation properties of explosion-proof pots made of sandwich structures with polyurea elastomer [J]. Journal of Vibration and Shock, 2016, 35(7): 138–144
[10] 侯海量, 朱锡, 谷美邦, 等. 破片模拟弹侵彻钢板的有限元分析 [J]. 海军工程大学学报, 2006, 18(3): 78–83 doi: 10.3969/j.issn.1009-3486.2006.03.019

HOU H L, ZHU X, GU M B, et al. Investigation on penetration of steel plate by fragment simulated projectile using finite element method [J]. Journal of Naval University of Engineering, 2006, 18(3): 78–83 doi: 10.3969/j.issn.1009-3486.2006.03.019
[11] 邓云飞, 张伟, 孟凡柱, 等. Q235钢单层板对平头刚性弹抗穿甲特性研究 [J]. 振动与冲击, 2015, 43(2): 74–78

DENG Y F, ZHANG W, MENG F Z, et al. Ballistic resistance of Q235 steel monolithic plates impacted by rigid blunt-nosed projectiles [J]. Journal of Vibration and Shock, 2015, 43(2): 74–78
[12] AMIRKHIZI A V, ISAACS J, MCGEE J, et al. An experimentally-based viscoelastic constitutive model for polyurea, including pressure and temperature effects [J]. Philosophical Magazine, 2006, 86(36): 5847–5866. doi: 10.1080/14786430600833198
[13] RECHT R F, IPSON T W. Ballistic perforation dynamics [J]. Journal of Applied Mechanics, 1963, 30(3): 384–390. doi: 10.1115/1.3636566