[1] Han H, Li J, Jiao L J, et al. Study on the Application of Ceramic-Metal Composite Materials in Bulletproof Field [J]. Mater Rev, 2007, 21(2): 34-37. (in Chinese)
[2] 韩辉, 李军, 焦丽娟, 等. 陶瓷-金属复合材料在防弹领域的应用研究 [J]. 材料导报, 2007, 21(2): 34-37.
[3] Shao B H, Zhang K. Explosive Welding Principle and Its Application [M]. Dalian: Dalian University of Technology Press, 1987. (in Chinese)
[4] 邵丙璜, 张凯. 爆炸焊接原理及其工程应用 [M]. 大连: 大连理工大学出版社, 1987.
[5] Dikshit S N, Kutumbarao V V, Sundararajan G. The Influence of Plate Hardness on the Ballistic Penetration of Thick Steel Plates [J]. Inter J Impact Eng, 1995, 16(2): 293-320.
[6] Abe A. Numerical Simulation of the Plastic Flow Field near the Bonding Surface of Explosive Welding [J]. J Mater Proc Tech, 1999, 85: 162-165.
[7] Yang Y, Li Z H, L P C, et al. A Temperature Distribution Model of Explosive Cladding Interface and Its Application [J]. Rare Metal Mater Eng, 2000, 29(3): 161-163. (in Chinese)
[8] 杨扬, 李正华, 吕培成, 等. 爆炸复合界面温度场模型及应用 [J]. 稀有金属材料与工程, 2000, 29(3): 161-163.
[9] Li X J. The Upper Limit of Bimetal Explosive Welding Parameters [J]. Explosion and Shock Waves, 1991, 11(2): 134-138. (in Chinese)
[10] 李晓杰. 双金属爆炸焊接上限 [J]. 爆炸与冲击, 1991, 11(2): 134-138.
[11] Taylor G. Oblique Impact of a Jet on a Plane Surface [J]. Phil Trans Roy Soc, 1966, 260: 96-100.
[12] Robinson J L. Mechanics of Wave Formation in Impact Welding [J]. Philos Magazome, 1975, 31(3): 587-597.
[13] El-Sobky H, Blazynski T Z. Analysis of the Mechanism of Collision in Multilayered Composites [A]//Proc 7th Int Conf on High Energy Rate Fabrication [C]. Leeds: University of Leeds, 1981: 100-112.
[14] Wang L L, Yu T X, Li Y C. Shock Dynamics Progress [M]. Hefei: University of Science and Technology of China Press, 1992: 370. (in Chinese)
[15] 王礼立, 余同希, 李永池. 冲击动力学进展 [M]. 合肥: 中国科技大学出版社, 1992: 370.
[16] Li X J, Yan H H, Wang J X, et al. Calculation of the Distribution Rule of Strain Rate near the Stagnation Point during Explosive Welding [J]. Explosion and Shock Waves, 2002, 22(4): 315-320. (in Chinese)
[17] 李晓杰, 闫鸿浩, 王金相, 等. 爆炸焊接驻点近区应变率分布规律计算 [J]. 爆炸与冲击, 2002, 22(4): 315-320.
[18] Li X J, Yan H H, Wang J X, et al. Analysis of Strain Field Near Stagnation Point in Explosive Welding [J]. Rare Metal Materials and Engineering, 2003, 23(9): 699-702. (in Chinese)
[19] 李晓杰, 闫鸿浩, 王金相, 等. 爆炸焊驻点近区应变场分析 [J]. 稀有金属材料与工程, 2003, 23(9): 699-702.
[20] Yang Y. The Technology of Metallic Explosive Welding and Physical Metallurgy [M]. Beijing: Chemical Industry Press, 2006: 128-137. (in Chinese)
[21] 杨扬. 金属爆炸复合技术及物理冶金 [M]. 北京: 化学工业出版社, 2006: 128-137.
[22] Chen H J. The Method of Step for Explosion Welding Parameters [A]//Paper Collection of 4th the Whole Country Explosive Process Research Conference [C]. Beijing: Institute of Mechanics, Chinese Academy of Sciences, 1982. (in Chinese)
[23] 陈火金. 爆炸焊接参数试验的台阶法 [A]//第四届全国爆炸加工学术会议论文集 [C]. 北京: 中国科学院力学研究所, 1982.
[24] Kowalick J F, Hay D R. Mechanism of Explosive Bonding [J]. Met Trans, 1971, 2(7): 1953-1958.
[25] Zhang J C. Influences of Collision Angle on the Interface State of Explosive Compound Materials [J]. Journal of Experimental Mechanics, 2007, 22(1): 63-68. (in Chinese)
[26] 张建臣. 碰撞角对爆炸复合材料界面状态的影响 [J]. 实验力学, 2007, 22(1): 63-68.