[1] BEN-MOSHE D, TARSI Y, ROSENBERG G. An armor assembly for armored vehicles: EP 0209221. 1986.
[2] CHOCRON S, ANDERSON C E JR, GROSCH D J, et al.Impact of the 7.62 mm APM2 projectile against the edge of a metallic target[J].International Journal of Impact Engineering, 2001, 25(5):423-437. doi: 10.1016/S0734-743X(00)00063-4
[3] BALOS S, GRABULOV V, SIDJANIN L, et al.Geometry, mechanical properties and mounting of perforated plates for ballistic application[J].Materials & Design, 2010, 31(6):2916-2924. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=JJ0218815196
[4] MISHRA B, RAMAKRISHNA B, JENA P K, et al.Experimental studies on the effect of size and shape of holes on damage and microstructure of high hardness armour steel plates under ballistic impact[J].Materials & Design, 2013, 43:17-24. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=JJ0228757162
[5] RADISAVLJEVIC I, BALOS S, NIKACEVIC M, et al.Optimization of geometrical characteristics of perforated plates[J].Materials & Design, 2013, 49:81-89. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=JJ0231243838
[6] KILIC N, BEDIR S, ERDIK A, et al.Ballistic behavior of high hardness perforated armor plates against 7.62 mm armor piercing projectile[J].Materials & Design, 2014, 63:427-438. http://linkinghub.elsevier.com/retrieve/pii/S0261306914004798
[7] 胡丽萍, 王智慧, 满红, 等.孔结构间隙复合装甲位置效应研究[J].兵器材料科学与工程, 2010, 33(1):89-90. doi: 10.3969/j.issn.1004-244X.2010.01.025

HU L P, WANG Z H, MAN H, et al.Study on the spot effect of spaced composite armor with multi-holes[J].Ordnance Material Science and Engineering, 2010, 33(1):89-90. doi: 10.3969/j.issn.1004-244X.2010.01.025
[8] 肖红亮, 李晓源, 时捷, 等.倾角效应对高强度钢板抗弹性能的影响[J].兵器材料科学与工程, 2011, 34(6):36-40. http://d.old.wanfangdata.com.cn/Periodical/bqclkxygc201106010

XIAO H L, LI X Y, SHI J, et al.Influence of obliquity effect on the ballistic performance of high strength steel plate[J].Ordnance Material Science and Engineering, 2011, 34(6):36-40. http://d.old.wanfangdata.com.cn/Periodical/bqclkxygc201106010
[9] 李换芝.倾角穿孔装甲对14.5 mm穿燃弹防护性能的影响[J].科技创新与生产力, 2016(2):90-91. doi: 10.3969/j.issn.1674-9146.2016.02.090

LI H Z.Influence of oblique perforated armor on the protective performance of the 14.5 mm armor-piercing incendiary[J].Technology Innovation and Productivity, 2016(2):90-91. doi: 10.3969/j.issn.1674-9146.2016.02.090
[10] 王建波, 闫慧敏, 范秉源, 等.弹着点对多孔钢板抗弹性能影响的数值模拟[J].兵器材料科学与工程, 2011, 33(6):73-75. http://d.old.wanfangdata.com.cn/Periodical/bqclkxygc201006022

WANG J B, YAN H M, FAN B Y, et al.Numerical simulation analysis about the influence of the hitting position on the ballistic performance of the multi-hole steel plate[J].Ordnance Material Science and Engineering, 2011, 33(6):73-75. http://d.old.wanfangdata.com.cn/Periodical/bqclkxygc201006022
[11] BØRVIK T, HOPPERSTAD O S, BERSTAD T, et al.A computational model of viscoplasticity and ductile damage for impact and penetration[J].European Journal of Mechanics-A/Solids, 2001, 20(5):685-712. doi: 10.1016/S0997-7538(01)01157-3
[12] LIDÉN E, MOUSAVI S, HELTE A, et al.Deformation and fracture of a long-rod projectile induced by an oblique moving plate:numerical simulations[J].International Journal of Impact Engineering, 2012, 40:35-45. http://linkinghub.elsevier.com/retrieve/pii/S0734743X11001436
[13] WARREN T L, POORMON K L.Penetration of 6061-T6511 aluminum targets by ogive-nosed VAR 4340 steel projectiles at oblique angles:experiments and simulations[J].International Journal of Impact Engineering, 2001, 25(10):993-1022. doi: 10.1016/S0734-743X(01)00024-0