[1] ARNOLD W, ROTTENKOLBER E.Fragment mass distribution of metal cased explsoive charges[J].Internatinal Journal of Impacting Engineering, 2008, 35(12):1393-1398. doi: 10.1016/j.ijimpeng.2008.07.049
[2] 沈正祥, 李亚哲, 张宏亮, 等.局部改性弹体低速贯穿金属靶板的破坏形式研究[J].高压物理学报, 2017, 31(2):202-207. doi: 10.11858/gywlxb.2017.02.014

SHEN Z X, LI Y Z, ZHANG H L, et al.Experimental studies on failure mode of low speed projectiles by local modification on steel plates[J].Chinese Journal of High Pressure Physics, 2017, 31(2):202-207. doi: 10.11858/gywlxb.2017.02.014
[3] 王志荣, 蒋军成, 徐进.气体爆炸载荷作用下抗爆容器的动力学响应[J].石油化工高等学校学报, 2006, 19(3):76-80. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=syhggdxx200603020

WANG Z R, JIANG J C, XU J.Dynamic response of pressure-shock-resistant vessel subjected to gas explosion load[J].Journal of Petrochemical University, 2006, 19(3):76-80. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=syhggdxx200603020
[4] 辛健, 马利, 胡洋, 等.内爆载荷作用下不锈钢圆柱壳的断裂失效分析[J].压力容器, 2013, 30(2):66-72. http://www.cqvip.com/QK/90974X/201302/44898181.html

XIN J, MA L, HU Y, et al.Fracture analysis of stainless steel tube under internal blasting loading[J].Pressure Vessel Technology, 2013, 30(2):66-72. http://www.cqvip.com/QK/90974X/201302/44898181.html
[5] 路胜卓, 王伟, 张博一.大型浮顶式储油罐的爆炸破坏机理实验[J].爆炸与冲击, 2011, 31(2):158-164. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bzycj201102008

LU S Z, WANG W, ZHANG B Y.Experimental research on destruction mechanism oflarge-scale floating-roof oil tank under blast loading[J].Explosion and Shock Waves, 2011, 31(2):158-164. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=bzycj201102008
[6] 陈福真, 张明广, 王妍, 等.油气储罐区多米诺事故耦合效应风险分析[J].中国安全科学学报, 2017(10):111-116. http://www.cnki.com.cn/Article/CJFDTotal-LDBK201511029.htm

CHEN F Z, ZHANG M G, WANG Y, et al.Risk analysis of coupling domino effect in petroliferous tank farm[J].China Safety Science Journal, 2017(10):111-116. http://www.cnki.com.cn/Article/CJFDTotal-LDBK201511029.htm
[7] GURNERY R W. The initial velocities of fragments from bombs, shells and grenades: BRL 405[R]. Maryland: Army Ballistic Research Laboratory, 1943.
[8] TAYLOR G I. Analysis of the explosion of a long cylindrical bomb detonated at one end[M]//Batchelor G K. The Scientific Papers of Sir Geoffrey Ingram Taylor (Ⅲ). Cambridge: Cambridge University Press, 1963: 277-286.
[9] HOGGATT R H, RECHT R F.Fracture behavior of tubular bombs[J].Journal of Applied Physics, 1968, 39(3):1856-1862. doi: 10.1063/1.1656442
[10] MOTT N F.Fragmentation of shell cases[J].Mathematical and Physical Sciences, 1947, 189(1018):300-308. doi: 10.1098/rspa.1947.0042
[11] GRADY D E. Fragmentation of rings and shells[M]. New York: Springer Verlag, 2006.
[12] HIROE T, FUJIWARA K, HATA H, et al.Deformation and fragmentation behavior of exploded metal cylinders and the effects of wall materials, configuration, explosive energy and initiated locations[J].International Journal and Impact Engineering, 2008, 35:1578-1586. doi: 10.1016/j.ijimpeng.2008.07.002
[13] TANAPORNRAWEEKIT G, KULSIRIKASEM W.FEM simulation of HE blast-fragmentation warhead and the calculation of lethal range[J].World Academy of Science, Engineering and Technology, 2012, 6(6):411-415. https://www.researchgate.net/publication/300048733_FEM_simulation_of_HE_blast-fragmentation_warhead_and_the_calculation_of_lethal_range
[14] KONG X S, WU W G, LI J, et al.A numerical investigation on explosive fragmentation of metal casing using smoothed particle hydrodynamic method[J].Material and Design, 2013, 51:729-741. doi: 10.1016/j.matdes.2013.04.041
[15] 沈正祥, 袁书强, 陈炯, 等.局部淬火金属柱壳破碎性的研究[J].高压物理学报, 2015, 29(4):293-298. doi: 10.11858/gywlxb.2015.04.009

SHEN Z X, YUAN S Q, CHEN J, et al.Fragmentation of metal cylindrical shell treated by local quenching[J].Chinese Journal of High Pressure Physics, 2015, 29(4):293-298. doi: 10.11858/gywlxb.2015.04.009
[16] GRADY D E, HIGHTOWER M M. Fracture of a 4140 steel cylinder under high explosive loading: Sand-90-0882C[R]. Sandia National Laboratories, 1990.
[17] REID W D, WALSH B E.Dynamic fracture properties of a tungsten, 3.5%Ni, 1.5%Fe alloy under explosive loading conditions[J].Journal de Physique, 1991, 1(C3):597-604. https://core.ac.uk/display/101068945