[1] LIEBERMANN R C.Multi-anvil, high pressure apparatus:a half-century of development and progress[J]. High Pressure Research, 2011, 31(4):493-532. doi: 10.1080/08957959.2011.618698
[2] KUNIMOTO T, IRIFUNE T. Pressure generation to 125 GPa using a 6-8-2 type multianvil apparatus with nano-polycrystalline diamond anvils[C]//Journal of Physics: Conference Series. IOP Publishing, 2010, 215(1): 012190.
[3] KUNIMOTO T, IRIFUNE T, SUMIYA H.Pressure generation in a 6-8-2 type multi-anvil system:a performance test for third-stage anvils with various diamonds[J]. High Pressure Research, 2008, 28(3):237-244. doi: 10.1080/08957950802246530
[4] SUMIYA H, IRIFUNE T.Indentation hardness of nano-polycrystalline diamond prepared from graphite by direct conversion[J]. Diamond and Related Materials, 2004, 13(10):1771-1776. doi: 10.1016/j.diamond.2004.03.002
[5] SUMIYA H, HARANO K, IRIFUNE T.Ultrahard diamond indenter prepared from nanopolycrystalline diamond[J]. Review of Scientific Instruments, 2008, 79(5):056102. doi: 10.1063/1.2918985
[6] SUMIYA H, IRIFUNE T.Hardness and deformation microstructures of nano-polycrystalline diamonds synthesized from various carbons under high pressure and high temperature[J]. Journal of Materials Research, 2007, 22(8):2345-2351. doi: 10.1557/jmr.2007.0295
[7] LE GUILLOU C, BRUNET F, IRIFUNE T, et al.Nanodiamond nucleation below 2 273 K at 15 GPa from carbons with different structural organizations[J]. Carbon, 2007, 45(3):636-648. doi: 10.1016/j.carbon.2006.10.005
[8] IRIFUNE T, KURIO A, SAKAMOTO S, et al.Formation of pure polycrystalline diamond by direct conversion of graphite at high pressure and high temperature[J]. Physics of the Earth and Planetary Interiors, 2004, 143:593-600. https://www.sciencedirect.com/science/article/pii/S0031920104000780
[9] DUBROVINSKY L, DUBROVINSKAIA N, BYKOVA E, et al.The most incompressible metal osmium at static pressures above 750 gigapascals[J]. Nature, 2015, 525(7568):226-229. doi: 10.1038/nature14681
[10] 王福龙, 贺端威, 房雷鸣, 等.基于铰链式六面顶压机的二级6-8型大腔体静高压装置[J].物理学报, 2008, 57(9):5429-5434. doi: 10.7498/aps.57.5429

WANG F L, HE D W, FANG L M, et al.Design and assembly of split-sphere high pressure apparatus based on the hinge-type cubic-anvil press[J]. Acta Physica Sinica, 2008, 57(9):5429-5434. doi: 10.7498/aps.57.5429
[11] 方啸虎.中国超硬材料与制品50周年精选论文集[M].杭州:浙江大学出版社, 2014:23-31.
[12] 王海阔. 基于国产六面顶压机增压装置的压力产生极限扩展与应用[D]. 成都: 四川大学, 2013.

WANG H K. Devlopment and application of pressure generation techniques based on hinge-type cubic press[D]. Chengdu: Sichuan University, 2013.
[13] WALKER D, CARPENTER M A, HITCH C M.Some simplifications to multianvil devices for high pressure experiments[J]. The American Mineralogist, 1990, 75(9/10):1020-1028. https://pubs.geoscienceworld.org/msa/ammin/article-abstract/75/9-10/1020/42423/some-simplifications-to-multianvil-devices-for
[14] OHTANI E, OKADA Y, KAGAWA N, et al. Development of a new guide-block system and high pressure and temperature generation[C]//Abstract of the 28th High Pressure Conference of Japan. Kobe, 1987: 222-223.
[15] XU C, HE D W, WANG H K, et al.Nano-polycrystalline diamond formation under ultra-high pressure[J]. International Journal of Refractory Metals and Hard Materials, 2013, 36:232-237. doi: 10.1016/j.ijrmhm.2012.09.004
[16] 王海阔, 贺端威, 许超, 等.复合型多晶金刚石末级压砧的制备并标定六面顶压机6-8型压腔压力至35 GPa[J].物理学报, 2013, 62(18):180703. doi: 10.7498/aps.62.180703

WANG H K, HE D W, XU C, et al.Calibration of pressure to 35 GPa for the cubic press using the diamond-cemented carbide compound anvil[J]. Acta Physica Sinica, 2013, 62(18):180703. doi: 10.7498/aps.62.180703
[17] LIU G D, KOU Z L, YAN X Z, et al.Submicron cubic boron nitride as hard as diamond[J]. Applied Physics Letters, 2015, 106(12):121901. doi: 10.1063/1.4915253
[18] WANG P, HE D W, WANG L P, et al.Diamond-cBN alloy:a universal cutting material[J]. Applied Physics Letters, 2015, 107(10):101901. doi: 10.1063/1.4929728