[1] IRIFUNE T, KURIO A, SAKAMOTO S, et al.Materials:ultrahard polycrystalline diamond from graphite[J].Nature, 2003, 421(6923):599-600. http://d.old.wanfangdata.com.cn/Periodical/cuihuaxb201601001
[2] TIAN Y, XU B, YU D, et al.Ultrahard nanotwinned cubic boron nitride[J].Nature, 2013, 493(7432):385-388. doi: 10.1038/nature11728
[3] WANG S, HE D, WANG W, et al.Pressure calibration for the cubic press by differential thermal analysis and the high-pressure fusion curve of aluminum[J].High Pressure Res, 2009, 29(4):806-814. doi: 10.1080/08957950903335521
[4] 赵有祥, 徐小平, 陈红, 等.环状容器内的温度校正和高压下温度相关性问题[J].物理学报, 1979, 28(6):872-876. doi: 10.3321/j.issn:1000-3290.1979.06.013

ZHAO Y X, XU X P, CHEN H, et al.Temperature measurement in "belt" apparatus and problem of temperature correlation at high pressures [J].Acta Phys Sin, 1979, 28(6):872-876. doi: 10.3321/j.issn:1000-3290.1979.06.013
[5] 王海阔, 贺端威, 许超, 等.基于国产铰链式六面顶压机的大腔体静高压技术研究进展[J].高压物理学报, 2013, 27(5):633-661. http://www.gywlxb.cn/CN/abstract/abstract1618.shtml

WANG H K, HE D W, XU C, et al.Development of large volume-high static pressure techniques based on the hinge-type cubic presses[J].Chinese Journal of High Pressure Physics, 2013, 27(5):633-661. http://www.gywlxb.cn/CN/abstract/abstract1618.shtml
[6] 亓曾笃.人造金刚石生长中的温度控制[J].高压物理学报, 1990, 4(3):204-209. http://www.gywlxb.cn/CN/abstract/abstract1618.shtml

QI Z D.The temperature control for the crowth of sythetic diamond[J].Chinese Journal of High Pressure Physics, 1990, 4(3):204-209. http://www.gywlxb.cn/CN/abstract/abstract1618.shtml
[7] XIE L, YONEDA A, YOSHINO T, et al.Graphite-boron composite heater in a Kawai-type apparatus:the inhibitory effect of boron oxide and countermeasures[J].High Pressure Res, 2016, 36(2):105-120. doi: 10.1080/08957959.2016.1164151
[8] SHATSKIY A, KATSURA T, LITASOV K D, et al.High pressure generation using scaled-up Kawai-cell[J].Phys Earth Planet Inter, 2011, 189(1/2):92-108. http://d.old.wanfangdata.com.cn/NSTLQK/NSTL_QKJJ0224900744/
[9] 方啸虎, 温简杰, 郑日升.中国超硬材料新态势[J].超硬材料工程, 2010, 22(1):18-21. doi: 10.3969/j.issn.1673-1433.2010.01.004

FANG X H, WEN J J, ZHENG R S, et al.New trends of china superhard materials[J].Superhard Material Engineering, 2010, 22(1):18-21. doi: 10.3969/j.issn.1673-1433.2010.01.004
[10] 贾晓鹏.优质Ⅱa型宝石级金刚石的合成技术[J].金刚石与磨料磨具工程, 2005(3):8-11. doi: 10.3969/j.issn.1006-852X.2005.03.002

JIA X P.Technology of growing large crystals of high quality type-Ⅱ a diamond crystal[J].Diamond & Abrasives Engineering, 2005(3):8-11. doi: 10.3969/j.issn.1006-852X.2005.03.002
[11] 何强, 唐俊杰, 王霏, 等.一种适用于极端高温条件的六面顶压机实验组装[J].高压物理学报, 2013, 28(2):145-151. http://www.gywlxb.cn/CN/abstract/abstract1618.shtml

HE Q, TANG J J, WANG F, et al.High temperature stable assembly designed for cubic press [J].Chinese Journal of High Pressure Physics, 2013, 28(2):145-151. http://www.gywlxb.cn/CN/abstract/abstract1618.shtml
[12] 杜建国, 贺端威, 高春晓, 等.矿物岩石高温高压实验与理论研究[M].北京:地震出版社, 2011:8-11.

DU J G, HE D W, GAO C X, et al.Experimental and theoretical studies of mineral and rock at high pressure and temperature [M].Beijing:Earthquake Press, 2011:8-11
[13] 王文丹, 贺端威, 王海阔, 等.二级6-8型大腔体装置的高压发生效率机理研究[J].物理学报, 2010, 59(5):3107-3115. http://d.old.wanfangdata.com.cn/Periodical/wlxb201005030

WANG W D, HE D W, WANG H K, et al.Research on pressure generation efficiency of 6-8 type multi-anvil high pressure apparatus [J].Acta Phys Sin, 2010, 59(5):3107-3015. http://d.old.wanfangdata.com.cn/Periodical/wlxb201005030
[14] XU C, HE D, WANG H, et al.Nano-polycrystalline diamond formation under ultra-high pressure[J].Int J Refract Metals Hard Mater, 2013, 36(1):232-237. http://d.old.wanfangdata.com.cn/NSTLQK/NSTL_QKJJ0229996906/
[15] 何飞, 贺端威, 马迎功, 等.二级6-8型静高压装置厘米级腔体的设计原理与实验研究[J].高压物理学报, 2015, 29(3):161-168. http://www.gywlxb.cn/CN/abstract/abstract1799.shtml

HE F, HE D W, MA Y G, et al.Design principles and experimental study of centimeter-scale sample chamber for two-stage 6-8 type static high pressure apparatus[J].Chinese Journal of High Pressure Physics, 2015, 29(3):161-168. http://www.gywlxb.cn/CN/abstract/abstract1799.shtml
[16] 马迎功, 贺端威, 韩晶晶, 等.二级6-8型静高压装置厘米级腔体内置加热元件的设计与温度标定[J].高压物理学报, 2017, 31(1):61-66. http://www.gywlxb.cn/CN/abstract/abstract1930.shtml

MA Y G, HE D W, HAN J J, et al.Design and temperature calibration for heater cell of centimeter-scale sample chamber for two-stage 6-8 type static high pressure apparatus[J].Chinese Journal of High Pressure Physics, 2017, 31(1):61-66. http://www.gywlxb.cn/CN/abstract/abstract1930.shtml
[17] 陈晓芳, 贺端威, 王福龙, 等.基于铰链式六面顶压机的二级6-8模超高压大腔体内置加热元件的设计与温度标定[J].高压物理学报, 2009, 23(2):98-104. doi: 10.3969/j.issn.1000-5773.2009.02.004

CHEN X F, HE D W, WANG F L, et al.Split-sphere high pressure apparatus based on hinge-type cubic-anvil press [J].Chinese Journal of High Pressure Physics, 2009, 23(2):98-104. doi: 10.3969/j.issn.1000-5773.2009.02.004
[18] 吕世杰, 罗建太, 苏磊, 等.滑块式六含八超高压实验装置及其压力温度标定[J].物理学报, 2009, 58(10):6852-6857. http://d.old.wanfangdata.com.cn/Periodical/wlxb200910031

LV S J, LUO J T, SU L, et al.A slide-type multianvil ultrahigh pressure apparatus and calibration of its pressure and temperature[J].Acta Phys Sin, 2009, 58(10):6852-6857. http://d.old.wanfangdata.com.cn/Periodical/wlxb200910031
[19] 亓曾笃.金刚石生产的加热方法[J].超硬材料与宝石, 2002, 14(4):26-28. http://d.old.wanfangdata.com.cn/Periodical/zbkj200204008

QI Z D.The heating mathods of diamond production[J].Superhard Material & GEM, 2002, 14(4):26-28. http://d.old.wanfangdata.com.cn/Periodical/zbkj200204008
[20] HERNLUND J.A numerical model for steady-state temperature distributions in solid-medium high-pressure cell assemblies[J].Am Mineralog, 2006, 91(2/3):295-305.
[21] 方啸虎, 邓福铭, 郑日升.现代超硬材料与制品[M].杭州:浙江大学出版社, 2011:181-189.

FANG X H, DENG F M, ZHENG R S, et al.Adanced superabrasives and related products[M].Hangzhou:Zhejiang University Press, 2011:181-189.
[22] 郭欣, 刘衍聪, 伊鹏.六面顶压机合成金刚石加热规律研究[J].人工晶体学报, 2010, 39(4):966-971. doi: 10.3969/j.issn.1000-985X.2010.04.028

GUO X, LIU Y C, YI P.Study on the law of heating process of diamond synthesized by cubic anvil press[J].Journal of High Synthetic Crystals, 2010, 39(4):966-971. doi: 10.3969/j.issn.1000-985X.2010.04.028
[23] 冯吉福, 林峰, 李立惟, 等.六面顶压机上不同组装结构的温度研究[J].超硬材料工程, 2009, 21(3):21-25. doi: 10.3969/j.issn.1673-1433.2009.03.005

FENG J F, LIN F, LI L W, et al.Study on temperature of different assembly structure in cubic hinge apparatus[J].Superhard Material Engineering, 2009, 21(3):21-25. doi: 10.3969/j.issn.1673-1433.2009.03.005
[24] 杨君刚.材料加热炉基础[M].西安:西北工业大学出版社, 2009:134-137.

YANG J G.Material heating furnace foundation[M].Xi'an:Northwestern Industry University Press, 2009:134-137.
[25] 王秦生.超硬材料及制品[M].郑州:郑州大学出版社, 2006:116-118.

WANG Q S.Superhard materials and products [M].Zhengzhou:Zhengzhou University Press, 2006:116-118.
[26] LIU Y, HE D, LEI L, et al.High pressure infiltration sintering of cBN-Si composites[J].Int J Refract Metals Hard Mater, 2015, 50:247-252. doi: 10.1016/j.ijrmhm.2015.01.006
[27] LIU G, KOU Z, YAN X, et al.Submicron cubic boron nitride as hard as diamond[J].Appl Phys Lett, 2015, 106(12):121901. doi: 10.1063/1.4915253
[28] FUJISAKI K, YOKOTA H, FURUSHIRO N, et al.Development of ultra-fine-grain binderless cBN tool for precision cutting of ferrous materials[J].J Mater Proc Technol, 2009, 209(15/16):5646-5652. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=c325829517e40df5b37d1dfc8b69ffc3
[29] 刘芳, 刘永刚, 谢鸿森.六面顶压机高压腔体温度场的数值模拟[J].高压物理学报, 2010, 26(2):135-140. http://www.gywlxb.cn/CN/abstract/abstract1437.shtml

LIU F, LIU Y G, XIE H S, et al.Numerical simulation of temperature field in sample assembly od cubic press[J].Chinese Journal of High Pressure Physics, 2010, 26(2):135-140. http://www.gywlxb.cn/CN/abstract/abstract1437.shtml
[30] 李瑞, 马红安, 韩奇钢, 等.基于ANSYS的金刚石合成腔内的温度场分析[J].吉林大学学报(工学版), 2008, 38(3):535-538. http://d.old.wanfangdata.com.cn/Periodical/jlgydxzrkxxb200803008

LI R, MA H A, HAN Q G, et al.Analysis of temperature field in diamond synthetic chamber based on ANSYS[J].Journal of Jilin University (Engineering and Technology Edition), 2008, 38(3):535-538. http://d.old.wanfangdata.com.cn/Periodical/jlgydxzrkxxb200803008
[31] WANG H, HE D, YAN X, et al.Quantitative measurements of pressure gradients for the pyrophyllite and magnesium oxide pressure-transmitting mediums to 8 GPa in a large-volume cubic cell[J].High Pressure Res, 2011, 31(4):581-591. doi: 10.1080/08957959.2011.614238