射弹冲击下带预裂槽金属靶的防护性能研究

童宗保; 王金相; 梁丽; 钱吉胜; 唐奎; 童宗保; 王金相; 梁丽; 钱吉胜; 唐奎

doi:10.11858/gywlxb.2017.02.002

[1]

董立松, 刘宁, 辛士进, 等.高硬度装甲钢抗弹性能及其机理研究[J].兵器材料科学与工程, 2010, 33(2):76-78. doi: 10.3969/j.issn.1004-244X.2010.02.022

DONG L S, LIU N, XIN S J, et al.Study on ballistic performance and mechanism of high hardness armor steel[J].Ordnance Material Science and Engineering, 2010, 33(2):76-78. doi: 10.3969/j.issn.1004-244X.2010.02.022

[2]

李晓源, 时捷, 董瀚.不同强度的40CrNi₂Mo钢抗弹性能研究[J].兵器材料科学与工程, 2008, 31(1):14-18. doi: 10.3969/j.issn.1004-244X.2008.01.004

LI X Y, SHI J, DONG H.Research on ballistic behavior of 40CrNi₂Mo steel targets with different strength[J].Ordnance Material Science and Engineering, 2008, 31(1):14-18. doi: 10.3969/j.issn.1004-244X.2008.01.004

[3]

时捷, 董瀚, 王琪, 等.硬度对装甲钢板抗弹性能的影响[J].钢铁研究学报, 2000, 12(3):36-41. doi: 10.3321/j.issn:1001-0963.2000.03.009

SHI J, DONG H, WANG Q, et al.Influence of hardness on the ballistic behavior of armor steel plate[J].Journal of Iron and Steel Research, 2000, 12(3):36-41. doi: 10.3321/j.issn:1001-0963.2000.03.009

[4]

SANGOY L, MEUNIER Y, PONT G.Steels for ballistic protection[J].Israel J Technol, 1988, 24:319-326. http://cn.bing.com/academic/profile?id=8e9783ddda52b532c0590c03189e82d6&encoded=0&v=paper_preview&mkt=zh-cn

[5]

张清华, 李伯龙, 聂祚仁, 等.高速冲击下2519A-T87铝合金微观组织研究[J].科学技术与工程, 2011, 11(15):3413-3416. doi: 10.3969/j.issn.1671-1815.2011.15.012

ZHANG Q H, LI B L, NIE Z R, et al.Microstructure evolution of 2519A-T87 during projectile impact[J].Science Technology and Engineering, 2011, 11(15):3413-3416. doi: 10.3969/j.issn.1671-1815.2011.15.012

[6]

BALAKRISHNAN M, BALASUBRAMANIAN V, REDDY G M.Micro structural analysis of ballistic tests on welded armor steel joints[J].Metallography, Microstructure & Analysis, 2013, 2:125-139. doi: 10.1007/s13632-013-0069-5

[7]

DUAN Z Q, LI S X, HUANG D W.Microstructures and adiabatic shear band formed by ballistic impact in steels and tungsten alloy[J].Fatigue Fract Eng Mater Struct, 2003, 26:1119-1126. doi: 10.1046/j.1460-2695.2003.00705.x

[8]

ZOU D L, ZHEN L, XU C Y, et al.Characterization of adiabatic shear bands in AM60B magnesium alloy under ballistic impact[J].Mater Charact, 2011, 62(5):496-502. doi: 10.1016/j.matchar.2011.03.003

[9]

ATAPEK S H, KARAGOZ S.Ballistic impact behavior of a tempered bainitic steel against 7.62 mm armour piercing projectile[J].Defence Sci J, 2011, 61(1):81-87. doi: 10.14429/dsj

[10]

HU C J, LEE P Y, CHEN J S.Ballistic performance and microstructure of modified rolled homogeneous armor steel[J].Journal of the Chinese Institute of Engineers, 2002, 25(1):99-107. doi: 10.1080/02533839.2002.9670684

[11]

SASTRY Y B S, BUDARAPU PATTABHI R, KRISHNA Y, et al.Studies on ballistic impact of the composite panels[J].Theor Appl Fract Mech, 2014, 72:2-12. doi: 10.1016/j.tafmec.2014.07.010

[12]

李金泉, 黄德武, 段占强, 等.穿甲侵彻过程中靶板内绝热剪切带特性及形成原因分析[J].兵工学报, 2005, 26(1):60-63. http://d.old.wanfangdata.com.cn/Periodical/bgxb200501013

LI J Q, HUANG D W, DUAN Z Q, et al.Analysis on adiabatic shear band characteristic and cause of formation in process of penetration in armor[J].Acta Armamentarii, 2005, 26(1):60-63. http://d.old.wanfangdata.com.cn/Periodical/bgxb200501013

[13]

段春争, 王敏杰.30CrNi₃MoV钢锯齿形切屑中绝热剪切带的微结构特征[J].机械工程材料, 2004, 28(10):16-19. doi: 10.3969/j.issn.1000-3738.2004.10.006

DUAN C Z, WANG M J.Microstructure characteristic of the adiabatic shear bands in serrated chips of 30CrNi₃MoV steel[J].Materials for Mechanical Engineering, 2004, 28(10):16-19. doi: 10.3969/j.issn.1000-3738.2004.10.006

[14]

WITTMAN C L, MEYERS M A, PA H R.Observation of an adiabatic shear band in AISI4340 steel by high-voltage transmission electron microscopy[J].Metallurg Trans A, 1990, 21(2):707-716. doi: 10.1007/BF02671941

[15]

ODESHI A G, AL-AMEERI S, BASSIM M N.Effect of high strain rate on plastic deformation of low allow steel subjected to ballistic impact[J].J Mater Process Tech, 2005, 162/163:385-391. doi: 10.1016/j.jmatprotec.2005.02.157

[16]

ZHOU N, WANG J X, YANG R.Damage mechanism and anti-penetration performance of multi-layered explosively welded plates impacted by spherical projectile[J].Theor Appl Fract Mech, 2012, 60(1):23-30. http://www.sciencedirect.com/science/article/pii/S0167844212000572

[17]

陈刚, 陈忠富, 徐伟芳, 等.45钢的J-C损伤失效参量研究[J].爆炸与冲击, 2007, 27(2):131-135. doi: 10.3321/j.issn:1001-1455.2007.02.007

CHEN G, CHEN Z F, XU W F, et al.Investigation on the J-C ductile fracture parameters of 45 steel[J].Explosion and Shock Waves, 2007, 27(2):131-135. doi: 10.3321/j.issn:1001-1455.2007.02.007