[1] Miess D, Rai G. Fracture toughness and thermal resistance of polycrystalline diamond compacts[J]. Mater Sci Eng A, 1996, 209(1/2): 270-276. http://www.sciencedirect.com/science/article/pii/0921509395101055
[2] Voronin G A, Zerda T W, Gubicza J, et al. Properties of nanostructured diamond-silicon carbide composites sintered by high pressure infiltration technique[J]. J Mater Res, 2004, 19(9): 2703-2707. doi: 10.1557/JMR.2004.0345
[3] Ekimov E A, Gromnitskaya E L, Gierlotka S, et al. Mechanical behavior and microstructure of nanodiamond-based composite materials[J]. J Mater Sci Lett, 2002, 21(21): 1699-1702. doi: 10.1023/A:1020889129195
[4] Qian J, Voronin G, Zerda T W, et al. High-pressure, high-temperature sintering of diamond-SiC composites by ball-milled diamond-Si mixtures[J]. J Mater Res, 2002, 17(8): 2153-2160. http://adsabs.harvard.edu/abs/2002JMatR..17.2153Q
[5] Ko Y S, Tsurumi T, Fukunaga O, et al. High pressure sintering of diamond-SiC composite[J]. J Mater Res, 2001, 36(2): 469-475. doi: 10.1023/A%3A1004840915607
[6] Larsson P, Axén N, Ekström T, et al. Wear of a new type of diamond composite[J]. Int J Refract Met Hard Mater, 1999, 17(6): 453-460. doi: 10.1016/S0263-4368(00)00006-8
[7] Palosz B, Stelmakh S, Grzanka E, et al. Origin of macrostrains and microstrains in diamond-SiC nanocomposites based on the core-shell model[J]. J Appl Phys, 2007, 102(7): 074303. doi: 10.1063/1.2785025
[8] Qian J, Zerda T W, He D, et al. Micron diamond composites with nanocrystalline silicon carbide bonding[J]. J Mater Res, 2003, 18(5): 1173-1178. doi: 10.1557/JMR.2003.0161
[9] 王海阔.基于国产六面顶压机增压装置的压力产生极限扩展与应用[D].成都: 四川大学, 2013: 114-115.

Wang H K. Development and application of pressure generation techniques based on hinge-type cubic press[D]. Chengdu: Sichuan University, 2013: 114-115. (in Chinese)
[10] Wang Z G, Liu Y G, Bi Y, et al. Hydrostatic pressure and temperature calibration based on phase diagram of bismuth[J]. High Pressure Res, 2012, 32(2): 167-175. doi: 10.1080/08957959.2012.677950
[11] 陈志, 杜建国, 周文戈, 等. 0.5-4.0 GPa、100-300 ℃条件下辉长岩弹性波速及衰减特征[J].高压物理学报, 2009, 23(5): 338-344. http://www.cqvip.com/QK/96553X/20095/31952407.html

Chen Z, Du J G, Zhou W G, et al. Wave velocity and attenuation characteristics of gabbro at 100-300 ℃ and 0.5-4.0 GPa[J]. Chinese Journal of High Pressure Physics, 2009, 23(5): 338-344. (in Chinese) http://www.cqvip.com/QK/96553X/20095/31952407.html
[12] Zhao Y S, Qian J, Daemen L L, et al. Enhancement of fracture toughness in nanostructured diamond-SiC composites[J]. Appl Phys Lett, 2004, 84(8): 1356-1358. doi: 10.1063/1.1650556