[1] Skaggs S R. A brief history of ceramic armor development[J]. Ceram Eng Sci Proc, 2003, 24(3): 337-349.
[2] Elek P, Jaramaz S, Mickovic D. Modeling of perforation of plates and multi-layered metallic targets[J]. Int J Solids Struct, 2005, 42(3/4): 1209-1224. http://www.sciencedirect.com/science/article/pii/S0020768304003762
[3] Solberg J K, Leinum J R, Embury J D, et al. Localised shear banding in Weldox steel plates impacted by projectiles[J]. Mech Mater, 2007, 39(9): 865-880. doi: 10.1016/j.mechmat.2007.03.002
[4] Dey S, Børvik T, Hopperstad O S, et al. On the influence of constitutive relation in projectile impact of steel plates[J]. Int J Impact Eng, 2007, 34(3): 464-486. doi: 10.1016/j.ijimpeng.2005.10.003
[5] Dey S, Børvik T, Teng X, et al. On the ballistic resistance of double-layered steel plates: An experimental and numerical investigation[J]. Int J Solids Struct, 2007, 44(1): 6701-6723. http://www.sciencedirect.com/science/article/pii/S0020768307001242
[6] Joshi V S, Carney T C. Modeling of bullet penetration in explosively welded composite armor plate[J]. AIP Conf Proc, 2006, 845(1): 1387-1390.
[7] 尹放林, 王明洋, 钱七虎.弹体垂直侵彻深度工程计算模型[J].爆炸与冲击, 1997, 17(4): 333-338. http://www.cnki.com.cn/Article/CJFDTotal-BZCJ704.006.htm

Yin F L, Wang M Y, Qian Q H. An engineering computing model for penetration depth of projectile normal into target[J]. Explosion and Shock Waves, 1997, 17(4): 333-338. (in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-BZCJ704.006.htm
[8] 王政, 倪玉山, 曹菊珍, 等.基于速度势侵彻模型的应用研究[J].高压物理学报, 2005, 19(1): 10-16.

Wang Z, Ni Y S, Cao J Z, et al. Application of the velocity potential model to penetration study[J]. Chinese Journal of High Pressure Physics, 2005, 19(1): 10-16. (in Chinese)
[9] 蒋志刚, 曾首义, 周建平.中等厚度金属靶板的三阶段贯穿模型[J].兵工学报, 2007, 28(9): 1046-1051.

Jiang Z G, Zeng S Y, Zhou J P. A three-stage model for the perforation of moderately thick metallic plates[J]. Acta Armamentarii, 2007, 28(9): 1046-1051. (in Chinese)
[10] Zhou N, Wang J X, Yang R, et al. Damage mechanism and anti-penetration performance of multi-layered explosively welded plates impacted by spherical projectile[J]. Theor Appl Fract Mech, 2012, 60(1): 23-30.
[11] 周楠, 王金相, 谢君, 等.球形弹丸作用下钢/铝爆炸复合靶的抗侵彻性能计算与分析[J].高压物理学报, 2013, 27(6): 839-846. http://qikan.cqvip.com/Qikan/Article/Detail?id=48594281

Zhou N, Wang J X, Xie J, et al. Calculation and analysis for the anti-penetration performance of explosively welded steel/aluminum plates target by the penetration of spherical projectile[J]. Chinese Journal of High Pressure Physics, 2013, 27(6): 839-846. (in Chinese) http://qikan.cqvip.com/Qikan/Article/Detail?id=48594281
[12] 李裕春, 时党勇, 赵远. ANSYS 11.0/LS-DYNA基础理论与工程实践[M].北京: 中国水利水电出版社, 2006: 437.

Li Y C, Shi D Y, Zhao Y. ANSYS 11.0/LS-DYNA Basic Theory and Engineering Practice[M]. Beijing: China Water Power Press, 2006: 437. (in Chinese)
[13] Kurtaran H, Buyuk M, Eskandarian A. Design automation of a laminated armor for best impact performance using approximate optimization method[J]. Int J Impact Eng, 2003, 29(1): 397-406.
[14] Gupta N K, Iqbal M A, Sekhon G S. Effect of projectile nose shape, impact velocity and target thickness on the deformation behavior of layered plates[J]. Int J Impact Eng, 2008, 35(1): 37-60. doi: 10.1016/j.ijimpeng.2006.11.004
[15] Chen X W, Li Q M. Shear plugging and perforation of ductile circular plates struck by a blunt projectile[J]. Int J Impact Eng, 2003, 28(5): 513-536. doi: 10.1016/S0734-743X(02)00077-5
[16] 张建春, 张华鹏.军用盔甲[M].北京: 长城出版社, 2003.

Zhang J C, Zhang H P. Body Armor[M]. Beijing: Great Wall Pubishing House, 2003. (in Chinese)