[1] Zhao G Z. Armor Engineering Mechanics [M]. Beijing: Weapons Industry Press, 1992: 2. (in Chinese)
[2] 赵国志. 穿甲工程力学 [M]. 北京: 兵器工业出版社, 1992: 2.
[3] Skaggs S R. A brief history of ceramic armor development [J]. Ceramic Engineering and Science Proceedings, 2003, 24(3): 337-349.
[4] Hetherington J G. Energy and momentum changes during ballistic perforation [J]. Int J Impact Eng, 1996, 18(3): 319-337.
[5] Elek P, Jaramaz S, Mickovic D. Modeling of perforation of plates and multi-layered metallic targets [J]. Int J Solids Struct, 2005, 42(4): 1209-1224.
[6] Dey S, Brvik T, Hopperstad O S, et al. On the influence of constitutive relation in projectile impact of steel plates [J]. Int J Impact Eng, 2007, 34(3): 464-486.
[7] Solberg J K, Leinum J R, Embury J D, et al. Localised shear banding in Weldox steel plates impacted by projectiles [J]. Mech Mater, 2007, 39(9): 865-880.
[8] Song B, Hu S S, Wang L L. Influence on the transmitted intensity of shock wave through different tatic orders of layered materials [J]. Acta Armamentar, 2000, 21(3): 272-274. (in Chinese)
[9] 宋博, 胡时胜, 王礼立. 分层材料的不同排列次序对透射冲击波强度的影响 [J]. 兵工学报, 2000, 21(3): 272-274.
[10] Dey S, Brvik T, Hopperstad O S, et al. On the influence of fracture criterion in projectile impact of steel plates [J]. Comput Mater Sci, 2006, 38(1): 176-191.
[11] Brvik T, Clausen A H, Hopperstad O S, et al. Perforation of AA5083-H116 aluminium plates with conical-nose steel projectiles-experimental study [J]. Int J Impact Eng, 2004, 30(4): 367-384.
[12] Chen X W, Zhang F J, Liang B, et al. Three modes of penetration mechanics of A3 steel cylindrical peojectiles impact onto 45 steel plates [J]. Explosion and Shock Waves, 2006, 26(3): 199-207. (in Chinese)
[13] 陈小伟, 张方举, 梁斌, 等. A3钢钝头弹撞击45钢板破坏模式的试验研究 [J]. 爆炸与冲击, 2006, 26(3): 199-207.
[14] Joshi V S, Carney T C. Modeling of bullet penetration in explosively welded composite armor plate [J]. AIP Conference Proceedings, 2006, 845(1): 1387-1390.
[15] Dey S, Brvik T, Teng X. On the ballistic resistance of double-layered steel plates: An experimental and numerical investigation [J]. Int J Solids Struct, 2007, 44(20): 6701-6723.
[16] Wang T F. Computer-aided design of explosive welding parameter [J]. Chinese Journal of High Pressure Physics, 2004, 18(3): 245-239. (in Chinese)
[17] 王铁福. 爆炸焊接参数的计算机辅助设计 [J]. 高压物理学报, 2004, 18(3): 245-239.
[18] Zhang G W. The Finish Effect and Shooting Range Tests [M]. Beijing: Beijing Institute of Technology Press, 2009: 72-73. (in Chinese)
[19] 张国伟. 终点效应及靶场试验 [M]. 北京: 北京理工大学出版社, 2009: 72-73.
[20] Qian W C. Penetration Mechanics [M]. Beijing: National Defense Industry Press, 1984: 238-287. (in Chinese)
[21] 钱伟长. 穿甲力学 [M]. 北京: 国防工业出版社, 1984: 238-287.
[22] Huang T, Wu W G, Li X B, et al. Oblique armor-piercing effect of a truncated cylindroconical projectile [J]. Journal of Vibration and Shock, 2010, 29(2): 125-127. (in Chinese)
[23] 黄涛, 吴卫国, 李晓彬, 等. 截锥形弹体斜穿甲花瓣型破坏模型 [J]. 振动与冲击, 2010, 29(2): 125-127.
[24] Du Z P, Li X B, Xia L J, et al. Research on the kinetic armor-piercing effect of semi-armor-piercing missile warhead [J]. Journal of Shanghai Jiaotong University, 2006, 40(10): 1794-1797. (in Chinese)
[25] 杜志鹏, 李晓彬, 夏利娟, 等. 反舰导弹战斗部动能穿甲花瓣型破坏模型 [J]. 上海交通大学学报, 2006, 40(10): 1794-1797.
[26] Xu S X, Wu W G, Li X B, et al. Theoretical analysis on residual velocity of conical projectile after penetrating thin plate at low oblique angle [J]. Journal of Ballitics, 2010, 22(3): 58-62. (in Chinese)
[27] 徐双喜, 吴卫国, 李晓彬, 等. 锥头弹小斜角侵彻薄板剩余速度理论分析 [J]. 弹道学报, 2010, 22(3): 58-62.
[28] Dugdale D S. Yielding of steel sheets containing slits [J]. J Mech Phys Solids, 1960, 8(2): 100-104.